Digital Lightwave NIC 2.5G Network Information
Condition: Refurbished / Calibrated
Warranty: 1 YEAR WARRANTY
The Digital Lightwave NIC 2.5GTM Network Information Computer® is a portable instrument for verifying and qualifying the performance of telecommunications networks and embedded network elements.
Providing a broad range of capabilities in a compact 10.5 to 14-pound package (depending on configuration), the NIC 2.5G can simultaneously and independently test protocols ranging from DS0/64 Kbps through OC-48/STM-16?including ATM and Jitter.
With a flexible software/firmware-based architecture, the multifunctional NIC 2.5G combines in a single platform the multitude of traditional hardware-based test sets required to install, monitor and maintain today?s global multiprotocol networks.
The NIC 2.5G is easy to use, with intuitive touchsensitive GUI capabilities that allow technicians of any experience level to operate the unit. Its flexible design lets you configure the NIC 2.5G to meet your current needs, then upgrade quickly and inexpensively as your network environment changes. The NIC 2.5G is also fully interoperable with the entire NIC product line, providing a broad range of diagnostic capabilities.
Combining innovative features, functionality and performance into a single cost-effective product, the NIC 2.5G is the most advanced testing platform available today.
Major Features:
- Simultaneous and independent testing of PDH, ATM and SONET/SDH. Separate protocol processors for PDH (DS1/E1, DS3/E3, E4), ATM and SONET/SDH (includes STM-0 thru STM-16, and STS-1 through STS-48)
- Internal DS1/DS3 and E1/E3 drop/insert from SONET/SDH, built-in M13/E13
- SONET/SDH 1310 nm, 1550 nm or 1310/1550 nm switchable wavelength laser option
- OC-48/STM-16 through-mode with overhead manipulation
- STM-0 through STM-4 jitter capability in some configurations
- Round-trip delay measurement capabilities at optical rates
- Support for AAL0, AAL1, AAL5, traffic shaping, PVC/SVC, OAM, QoS measurements, HEC error generation
- Alarm/error generation and analysis
- Test set configuration with graphical switch matrix
- Auto configuration to pattern level
- Troublescan
- 10.4-inch active matrix color display with touch screen
- Dual slot PCMCIA interface
- Built-in optical power and frequency measurement
- Remote control GUI
- Software/firmware upgradeable via Web
- SCPI over GPIB, TCP/IP, or RS-232c
General Specifications
Operating Temperature: 0o to 40o C @ 85% RH
Storage Temperature: -20o to 60o C @ 95% RH
Power Requirements: 100-120 and 200-240 VAC, 50-60 Hz
Dimensions: 10.1 H x 12.3 W x 4.7 D in (257 x 312 x 120 mm)
Weight: 10.5 to 14 lb (depending on configuration)
Auxiliary Interfaces
RS-232: V.24, DB-9
Parallel Port: DB-25
DCC: RS-449, DB-15
Orderwire: Handset jack (A-law)
BITS/SETS Clock: Bantam
2.5G Clock Out
Jitter Out
PCMCIA: Dual Slot: 2-Type II
or 1-Type III
10 BaseT: RJ-45
USB
Input/Output Trigger: SMA
For full Digital Lightwave NICS 2.G specifications, please click here: Digital Lightwave NIC 2.5G
The Digital Lightwave NIC 2.5G Network Information Computer With Options: DS1, DS3, E1, E3, E4, OC1, OC3, OC12, & OC48
An Intuitive Portable Testing Platform For Global SONET/SDH, PDH and ATM Networks.
Includes Carrying Case w/ Strap And Accessories As Listed!
Digital Lightwave NIC 2.5G NIC-2.5G Test Set Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
NIC2.5G NIC2.5 NIC 2.5
(BC#: -L/T*
- Digital Lightwave NIC 2.5G NIC25G-A1E1F2 Network Information Computer: (BC#: -L/T*)
- DS1
- DS3
- E1
- E3
- E4
- OC1
- OC3
- OC12
- OC48
- Bantam To Bantam Cable
- Fiber Cables:
- (2) SM FC-SC
- (2) SM FC-FC
- (2) BNC To BNC Cables
- Spare Fuse
- Power Cord
- RS232 PC Interface Cable
- (2) Ethernet Patch Cables
- Digital LightWave NIC/NAA Software
- Digital LightWave Quick Reference Guide
- User Manual On CD-ROM
- Carrying Case w/ Strap