Fluke Networks DTX-EFM2 Fiber Modules

Fluke Networks' DTX-EFM 2

With today's demands on high-speed data networks containing both fiber optic and twisted-pair cabling, it's more important than ever to certify and document multiple media types to ensure a properly executed installation. The DTX CableAnalyzer™ enables you to certify fiber optic cabling with on-board fiber modules. More convenient and powerful than other fiber optic test solutions, these modules enhance certification with two-fiber, dual wavelength testing and professional documentation of test  results using LinkWare™. Not only can you certify both fiber and copper cables, but you can do it  faster and more efficiently than you ever imagined.  With the latest introduction of the Encircled Flux (EF) Multimode Fiber Modules, the DTX  CableAnalyzer provides an efficient and practical solution that complies with the EF  requirements of TIA-526-14-B and IEC 61280-1-4.

Record Fast Fiber Certification

We engineered the DTX Fiber Modules to accelerate testing through exclusive technology and an easy-to-use interface. Press the Autotest button  and automatically test two fibers, each at two wavelengths, measure length,  and determine pass or fail status – all in about 12 seconds. Our fiber  modules let you test more fibers in less time, minimizing testing costs and  freeing you up for other tasks.

Deliver Complete Tier 1 (Basic) Certification

DTX fiber modules provide a complete certification solution – loss, length and polarity. Validate fiber link performance and installation quality. Measure optical loss at multiple wavelengths, measure fiber length and verify polarity. You can bi-directionally test two fibers at two wavelengths with incredible speed without swapping main and remote units, a capability only available from Fluke Networks.

Certify Multimode and Singlemode Fiber

Your network may contain both multimode or singlemode fiber types. By combining 2 sets of modules, you can certify any multimode and
singlemode fiber at 850, 1300, 1310, and 1550nm. Then save, upload, manage and print comprehensive certification reports using Fluke
Networks LinkWare software.

Encircled Flux Compliant Multimode Fiber Testing

TIA-526-14-B and IEC 61280-1-4 now require tighter launch conditions to reduce measurement uncertainty. With the DTX-EFM2, users who are familiar with the DTX CableAnalyzer can easily make use of these new modules to perform EF compliant testing with no additional training. The DTX-EFM2 with the Encircled Flux Test Reference Cords (EF-TRCs) provide the most efficient and practical EF standards compliant testing solution. These EF-TRCs are individually tuned so that any DTX-EFM2 produces an EF compliant launch at the end of the EF-TRC.

Find Faults Faster

Use the integrated on-module visual fault locator (VFL) to troubleshoot simple link problems. The bright laser-driven VFL helps you visually locate many near-end fiber faults, and is useful for continuity and polarity verification. Our integrated design ensures that the VFL is always on-hand when you need it.

You Only Need One Compact Field Tester

Fluke Networks is committed to providing innovative solutions for testing and certifying copper and fiber cabling systems. Simply add these
powerful modules to your DTX CableAnalyzer to certify, troubleshoot and document your fiber installations – today and tomorrow – with one compact field tester.
 

Having trouble viewing this file? Click this link to download