Evident OmniScan X4 Phased Array Ultrasonic Flaw Detector

• Evident OmniScan X4 Phased Array Ultrasonic Flaw Detector (BC# -L/T*)
• AC Adapter/Charger
• Power Cord
• Carrying Case (G)

Evident OmniScan X4 Phased Array Ultrasonic Flaw Detector 

The OmniScan X4 Phased Array Flaw Detector is a portable ultrasonic inspection instrument made by Evident. It helps inspectors examine welds, pipes, and industrial components for internal damage without cutting them open or damaging them. This process is called nondestructive testing.

Using a compatible ultrasonic probe, the OmniScan X4 sends sound waves into a material and analyzes the returning signals. Its phased array technology electronically controls the sound beam to inspect from multiple angles, helping trained operators locate and evaluate flaws such as cracks and weld defects.

The instrument also supports advanced imaging techniques, including Total Focusing Method (TFM) and Phase Coherence Imaging (PCI). These tools provide detailed views of inspection areas and help make small defects and crack tips easier to distinguish. Inspectors can combine techniques to better understand challenging indications.

Common applications include inspecting pipelines, pressure vessels, structural welds, and components affected by corrosion. The OmniScan X4 helps operators assess flaw location and severity, measure remaining wall thickness, and collect inspection records. Its capabilities vary by model, probe selection, and inspection setup.

Designed for field use, the OmniScan X4 features a 10.6-inch touchscreen, an IP65-rated enclosure, and hot-swappable batteries. Onboard software supports inspection planning, calibration, data collection, and analysis, while compatible computer software provides additional review and reporting tool.

Features:

• Phased Array Ultrasonic Testing (PAUT) for inspecting materials from multiple angles.
• Total Focusing Method (TFM) for detailed ultrasonic imaging.
• Phase Coherence Imaging (PCI) to enhance small flaws and crack tips.
• Time-of-Flight Diffraction (TOFD) for weld inspection and flaw sizing.
• Conventional ultrasonic testing (UT) support.
• Plane Wave Imaging (PWI) with compatible linear array probes.
• Twin TFM/PCI inspection using two probes to examine welds from both sides.
• High-resolution imaging up to 1024 × 1024 points per TFM or PCI image.
• 10.6-inch touchscreen usable with gloves.
• Onboard scan planning, calibration, and analysis tools.
• 1 TB internal SSD for inspection data storage.
• Wi-Fi 6E and Bluetooth 5.3 connectivity.
• USB, Ethernet, HDMI, and SD card connections.
• Hot-swappable batteries for extended operation.
• IP65-rated enclosure for protection against dust and water jets.
• Operating temperature range of −10°C to +45°C.
• Compatible computer software for advanced analysis and reporting.