EXFO FPM-302X FLS-300-12D-23BL SM MM Fiber Loss Test Set (FPM-300 FLS-300)
Condition: Refurbished
Warranty: 1 YEAR WARRANTY
Shipping: USA & Worldwide
- EXFO FPM-300 Power Meter (BC# 42186-L/T*)
- SM/MM Wavelengths:
- 830nm
- 850nm
- 980nm
- 1300nm
- 1310nm
- 1450nm
- 1490nm
- 1550nm
- 1590nm
- 1625nm
- SC Connector For Power Meter
- SM/MM Wavelengths:
- EXFO FLS-300-12-23BL-EI-EA Light Source (BC# 42185-L/T*)
- SM/MM Wavelengths:
- 850nm
- 1300nm
- 1310nm
- 1550nm
- (2) SC Connectors For Source
- SM/MM Wavelengths:
- (2) MM SC-SC Fiber Optic Cables
- (2) SM SC-SC APC Fiber Optic Cables
- (2) AC Adapter/Charger
- (2) Straps For Units
- Hard Copy User Manual
- Carrying Case (G)
EXFO FPM-300 & FLS-300 Fiber Loss Test Set
Exfo FPM-300 Power Meter
Applications
- Power measurement
- Link-loss characterization
Key Features and Benefits
- Highly accurate unit offering 10 calibrated wavelengths and reference values
- No offset nulling required, reducing measurement time
- Three-year warranty and recommended calibration interval, for dramatically reduced cost of ownership
- Autonomy of over 300 hours
- Instrument identification available in six languages
The FPM-300 Power Meter is part of EXFOﾒs new line of handheld units, which includes the FLS-300 Light Source and the FOT-300 Optical Loss Test Set.
Auto-Wavelength Recognition
The FLS-300 or FOT-300 units can transmit with a wavelength-identification digital encrypted protocol, enabling the FPM-300 Power Meter to automatically use the proper calibration parameters. This feature reduces the need for communication between the two technicians and decreases the potential for error.
Distant Referencing
Signal encrypting can also give the receiving end information on the power to be used as reference, helping ensure efficient referencing, even when the two units are far apart.
No Offset Nulling
Thanks to its unique design, the FPM-300 Power Meter reduces measurement time in typical measurement situations, as the need for an offset nulling is eliminated.
FTTx Ready
EXFOﾒs FPM-300 allows for the testing of passive optical networks (PONs) at 1310 nm, 1490 nm and 1550 nm, the three wavelengths recommended by the ITU-T (G.983.3) for PONs.
Specifications:
| Power meter port | GeX |
| Power range (dBm) | 10 to -50 |
| Range displayed (dBm) | Down to -50 |
| Number of calibrated wavelengths | 10 |
| Power uncertainty | ± 5 % ± 10 nW |
| Resolution (dB) | 0.01 |
| Automatic offset nulling | Yes |
| Warmup time (s) | 0 |
| Display units | dB/dBm/W |
| Automatic wavelength recognition | Yes |
| Screen refresh rate (Hz) | 3 |
| Tone detection (Hz) | 270, 1 k, 2 k |
| Battery life (hours) (typical) | > 300 |
EXFO FLS-300 Fiber Light Source
The FLS-300 Light Source is part of EXFO’s new line of handheld units, which includes the FPM-300 Power Meter and the FOT-300 Optical Loss Test Set.
Auto-Wavelength Recognition
The FLS-300 Light Source can transmit with a wavelength-identification digital encrypted protocol, so that any compatible unit—the FPM-300 Power Meter and the FOT-300 Optical Loss Test Set—can automatically use the proper calibration parameters. This feature reduces the need for communication between the two technicians and decreases the potential for error.
Distant Referencing
Signal encrypting can also give the receiving end information on the power to be used as reference, helping ensure efficient referencing, even when the two units are far apart.
FTTx Ready
EXFO’s FLS-300 allows for the testing of passive optical networks (POns) at 1310 nm, 1490 nm and 1550 nm, the three wavelengths recommended by the ITU-T (G.983.3) for PONs.
Features:
- Multifunctional light source: up to three singlemode wavelengths on a single port, or four wavelengths (two multimode, and two singlemode) on two ports
- Power autonomy of 120 hours
- Highest output power in the industry
Specifications:
| Central wavelength (nm) | 850 ± 25 1300 +50/–10 1310 ± 20 1550 ± 20 |
| Spectral width (nm) | ≤5 50/135 |
| Output power (dBm) | ≥1/≥1 ≥ –20/≥ –20 (62.5/125 µm) |
| Power stability (dB) | 8 hours ±0.10 |
| Battery life (hours) | 120 |
| Enables automatic wavelength recognition | Yes |
| Tone generation (Hz) | 270, 1 k, 2 k |
| Size (H x W x D) | 18.5 cm x 10.0 cm x 5.5 cm (71/4 in x 4 in x 21/8 in) |
| Weight | 0.4 kg (0.9 lb) |
| Temperature | Operating: -10 °C to 50 °C (14 °F to 122 °F) Storage: -40 °C to 70 °C (–40 °F to 158 °F) |
| Relative humidity | 0 % to 95 % non-condensing |
| Safety | 21 CFR 1040.10 and IEC 60825-1:2007 CLASS 1 LASER PRODUCT |