Divot SM SC/APC Bare Fiber Adapter Testing Device
$245.00
Availability:
Out of stock
SKU
1Q41
Condition: Refurbished
Warranty: 90 Day Exchange
Request a Quote for
Divot Bare Fiber Testing Device
The Divot® is designed to quickly connect to unterminated fiber for testing, servicing or communication requirements. Connect the patch cable included with the system to your test equipment and insert bare fiber into the end of the Divot® module. Preparation of the bare fiber is easy. Simply strip and clean a few inches of fiber down to 125uM cladding. Cleave fiber leaving approximately 3/4ヤ of bare fiber exposed. Insert the bare fiber into the Divot® module until it stops. The device will accept a non-cleaved fiber with a typical insertion loss of less than 0.8dB. Cleaved fiber will result in even lower insertion loss. Connections are suitable for many testing applications with results similar to a standard terminated piece of fiber.
Features:
Specifications:
The Divot® is designed to quickly connect to unterminated fiber for testing, servicing or communication requirements. Connect the patch cable included with the system to your test equipment and insert bare fiber into the end of the Divot® module. Preparation of the bare fiber is easy. Simply strip and clean a few inches of fiber down to 125uM cladding. Cleave fiber leaving approximately 3/4ヤ of bare fiber exposed. Insert the bare fiber into the Divot® module until it stops. The device will accept a non-cleaved fiber with a typical insertion loss of less than 0.8dB. Cleaved fiber will result in even lower insertion loss. Connections are suitable for many testing applications with results similar to a standard terminated piece of fiber.
Features:
- Internal replaceable cartridge filled with optical coupling compound
- Low insertion loss
- No dipping, messy applicators or external reservoirs to fill
- LiteLOCK® Technology
- Quickly test fiber without terminating
- Accepts non-cleaved fiber
- Repeatable and Reusable
Specifications:
Fiber type: | Singlemode 9/125uM, Multimode 62.5/125uM or Multimode 50/125uM |
Cable length: | 1 meter |
Connector styles: | FC, ST®, SC, FC/APC, SC/APC, LC |
Number of insertions: | 1000 min. (500 min. per cartridge) |
Insertion loss (Typ.): | < 0.5 dB (base on an cleaved fiber end, uncleaved < 0.8 dB) |
Back Reflection (Typ.): | < 45 dB |
Operating temp.: | -10°C to +40°C |
For full Divot Bare Fiber Adapter product specifications, please click here: Divot Bare Fiber Adapter
Divot SingleMode SC/APC Bare Fiber Testing Device
Quickly test fiber without terminating
Includes A Case For Unit & Accessories As Listed
DVT-S5 DVTS5
Fiber Plus International Divot SC/APC Divot-SC/APC Bare Fiber Testing Device Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 16255
- Divot Module w/ SingleMode SC/APC Patch Cable (BC# 16255)
- Sealed OCC Cartridge
- Divot Bare Fiber Tester Instructions
- Case For Unit