Fluke 190-062 Scopemeter Handheld Oscilloscope

 190-062 Scopemeter

The Fluke ScopeMeter 190 Series II combine the highest safety ratings and rugged portability with the high performance of a bench oscilloscope. Designed for plant maintenance engineers and technicians, these tough ScopeMeter test tools go into harsh, dirty, and hazardous industrial conditions to test everything from microelectronics to power electronics applications. The 190 Series II is the one test tool you will reach for to tackle just about any troubleshooting task. They include a multimeter, TrendPlotﾙ and ScopeRecordﾙ roll paperless recorder modes and hands free operation with Connect-and-Viewﾙ triggering, and much more

The FLUKE 190-062 ScopeMeter oscilloscope has two electrically isolated channels, and is safety rated for industrial applications. This scope combines rugged portability with the high performance of bench oscilloscopes. Its 60 MHz of bandwidth, 625 MS/sec sampling rate, and deep memory of 10,000 samples per channel allows high-accuracy capture and display of waveform details, noise, and other disturbances.

Perform timing or amplitude related measurements on three phases or three-axis control systems or simply compare and contrast multiple test points in a circuit under test. Features like TrendPlotﾙ, ScopeRecordﾙ, and Connect-and-Viewﾙ help you quickly diagnose industrial machinery, automation and process controls, and power electronics to minimize repair costs and downtime. These features make the oscilloscopes easy to use especially when diagnosing the most difficult problems like complex waveforms, intermittent events and signal fluctuations or drift. New Li-ion battery technology keeps your scope on the job, all day.


Specifications:
 

Vertical Deflection
Number of channels	2
Bandwidth	60 MHz
Rise time	5.8 ns
Number of scope inputs	2 input channels plus external trigger
Channel architecture	All inputs fully insulated from each other and from ground Inputs may be activated in any combination
Input Coupling	AC or DC, with ground level indicator
Input sensitivity	2 mV/div to 100 V/div, plus variable attenuation
Bandwidth limiter	User selectable: 20 kHz, 20 MHz or full bandwidth
Normal/invert/variable	On each input channel, switched separately
Input voltage	CAT III 1000 V/CAT IV 600 V rated, see General Specifications for further details
Vertical resolution	8 Bit
Accuracy	± (2.1 % of reading + 0.04 x range/div) @ 5 mV/div to 100 V/div
Input impedance	1 MO ± 1 % // 14 pF ± 2 pF
Horizontal
Maximum real-time sample rate (sampled simultaneously)	625 MS/s for each channel
Record length	Up to 10,000 samples per channel
Time base range	10 ns/div to 4 s/div
	Time base in a 1-2-4-sequence Slower time/division settings using ScopeRecordﾙ Roll mode (see ﾑRecorder modeﾒ)
Maximum record length	10,000 samples per channel in scope mode; 30,000 points per channel in ScopeRecordﾙ Roll mode (see ﾑRecorder modeﾒ)
Timing accuracy	± (0.01 % of reading + 1 pixel)
Glitch capture	8 ns peak detect on each channel (using real time sampling and data compression, at any timebase setting)
Display and acquisition
Display	153 mm (6 in) full-color LCD with LED backlight
Display modes	Any combination of channels; average on/off; replay
Visible screen width	12 divisions horizontally in scope mode
Digital persistence modes	off/short/medium/long/infinite and envelope mode
Waveform mathematics	One mathematical operation on any 2 input channels: add/subtract/multiply; X-Y-mode Frequency Spectrum using FFT analysis
Acquisition modes	Normal, Averaged, Auto, Single Shot, ScopeRecordﾙ roll, glitch capture, waveform compare with automatic ﾓPass/Fail testingﾔ; Replay

 

For full Fluke 190-062 product specifications, please click here: Fluke 190-062

Having trouble viewing this file? Click this link to download