Fluke 375 True RMS AC/DC Clamp Meter
$395.00
Availability:
In stock
SKU
11H55
Condition: Refurbished
Warranty: 1 YEAR WARRANTY
Shipping: USA & Worldwide
- Fluke 375 True RMS Clamp Meter (BC# 24912M)
- (2) Fluke 1000V Hard Point Test Leads (1-Red, 1-Black)
- User Manual On CD-ROM
- Carrying Case (G)
Request a Quote for
Fluke 375 True-rms AC/DC Clamp Meter
The new Fluke 374 and 375 clamp meters offer improved performance perfect for many current measurement situations. With true-rms ac voltage and current measurements, the Fluke 374 and 375 can read up to 600 V and 600 A in both ac and dc modes. Additionally, both are compatible with the new iFlexﾙ flexible current probe (sold separately) which expands the measurement range to 2500 A ac and provides increased display flexibility, ability to measure around awkward sized conductors and improved wire access.
Measurement capability:
Features:
Specifications:
The new Fluke 374 and 375 clamp meters offer improved performance perfect for many current measurement situations. With true-rms ac voltage and current measurements, the Fluke 374 and 375 can read up to 600 V and 600 A in both ac and dc modes. Additionally, both are compatible with the new iFlexﾙ flexible current probe (sold separately) which expands the measurement range to 2500 A ac and provides increased display flexibility, ability to measure around awkward sized conductors and improved wire access.
Measurement capability:
- 600 A ac and dc current measurement with fixed jaw
- 600 V ac and dc voltage measurement
- True-rms ac voltage and current for accurate measurements on non-linear signals
- Frequency measurement to 500 Hz with both jaw and iFlexﾙ
- Resistance measurement to 60 kO (Fluke 375) with continuity detection
- Min, max, average and inrush recording to capture variations automatically
- 500 mV dc measurement range to interface with other accessories
- 1000 µF capacitance measurement
Features:
- CAT IV 600V, CAT III 1000 V safety rating
- Integrated low pass filter (Fluke 375 only) and state of the art signal processing allows for use in noisy electrical environments while providing stable readings
- Proprietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it
- Ergonomic design fits in your hand and can be used while wearing personal protective equipment
- Large, easy to read, backlight display automatically sets the correct measurement range so you do not need to change switch positions while taking a measurement
Specifications:
| Fluke 375 | Range | Max Resolution | Accuracy |
| AC current via jaw | 600 A | 0.1 A | 2 % ± 5 digits |
| AC current via iFlexﾙ (optional) | 2500 A | 0.1 A | 3 % ± 5 digits |
| DC current | 600 A | 0.1 A | 2 % ± 5 digits |
| AC voltage | 600 V | 0.1 V | 1.5 % ± 5 digits |
| DC voltage | 600 V | 0.1 mV | 1% ± 5 digits |
| Resistance | 60,000 O | 0.1 O | 1% ± 5 digits |
| Frequency | 500 Hz | 0.1 Hz | 0.5 % ± 5 digits |
| Capacitance | 1 µF to 1000 µF | 1 µF | 1 % ± 4 digits |
| True-rms | Yes | ||
| Continuity | Yes | ||
| Hold | Yes | ||
| Backlight | Yes | ||
| Min/Max | Yes | ||
| Inrush | Yes | ||
| Low pass filter | Yes | ||
| 18 in iFlexﾙ Flexible Current Probe | Optional accessory | ||
| 10 in iFlexﾙ Flexible Current Probe | Optional accessory | ||
| Wire capacity | 750 MCM or 2-500 MCM | ||
| Safety Rating | CAT III 1000 V, CAT IV 600 V | ||