Fluke 5720A High Performance Multi Function Calibrator w/ Option 03 Wideband
Condition: Refurbished / Calibrated
Warranty: 1 Year Warranty
Shipping: USA & Worldwide
- Fluke 5720A High Performance Multi Function Calibrator (BC# 39446-L/T*)
- Installed Option:
- 03: Wideband AC Voltage 10 Hz to 30 MHz
- Installed Software Revisions:
- Main: 1.4
- Inguard: B
- Installed H/W Assemblies Modules:
- Switching Matrix: DC Volt Module
- AC Volt Module: 220V Module
- 1100V/2A Module: Current Module
- Ohms Module: Wideband Module
- Hires Osc Module: Rear Panel
- Installed Option:
- AC Power Cord
- User Manual On CD-ROM
Fluke 5720A High Performance Multi Function Calibrator
The 5720A calibrator sets the highest standards for accuracy and performance
Growing global trade is causing manufacturers to pay close attention to controlling, improving, and measuring quality in all processes from design through manufacturing. While this is good for product quality, it also increases your calibration workload.
High performance plus a choice of confidence levels
Since 1988, the Fluke 5700A has set the standard for multi-function calibrator performance. The Fluke 5700A Series II and 5720A set even higher standards, calibrating your high performance workload up to 8 1/2 digit system DMMs. Both models now state specifications to the standard Fluke 99% confidence level as well as the 95% confidence level to support easy measurement comparisons according to international quality standards including ISO 9000 and ISO guide 25. All specifications are absolute and include the uncertainty of the calibration standards used. No additional analysis is required. Relative specifications are also available.
Dramatically improved performance specifications
The new high performance 5720A offers an unprecedented accuracy level that delivers the lowest uncertainties available. It calibrates more of your preision meter workload, more easily and cost effectively than ever before.
Intuitive easy-to-use design
The 5700A Series II and the 5720A are remarkable easy to use. All readouts appear in plain language rather than in cryptic error codes. Just enter values on the numeric keypad and press the ENTER key.
Multifunction Calibrator
The 5720A calibrator raises the performance of the world standard 5700A to the next level. The 5720A covers the most demanding workload, covering DMMs up to 8 1/2 digits and delivering the highest level of performance of any calibrator on the market. It states specifications to both 99% and 95% confidence levels and incldues powerful internal features, such as Artifact Calibration and Cal Check, to simplify support and dramatically reduce your cost of ownership.
Specifications:
| DC Voltage | Range: 0 - +1100V Output: 10V Best traceable uncertainty: +3.25 ppm |
| AC Voltage | Range: 220 uV - 1100V Output: 1V Best traceable uncertainty: +55 ppm |
| Resistance | Range: 0 - 100 M Output: 10 k Best traceable uncertainty: +9 ppm |
| DC Current | Range: 0 - +2.2A Output: 10 mA Best traceable uncertainty: +37 ppm |
| AC Current | Range: 9 uA - 2.2A Output: 100 mA Best traceable uncertainty: +140 ppm |
| General Specifications | |
| Warm up Time | 2x the time since last warmed up, to a maximum of 30 minutes |
| System Installation | Rear output configuration and rack-mount kit available |
| Interfaces | IEEE-488, RS-232, 5725A, 5205A or 5215A, 5220A, phase lock in (BNC), phase reference out (BNC) |
| Temperature Performance | Operating: 0°C to 50°C Calibration: 15°C to 35°C Storage: -40°C to 75°C |
| Relative Humidity | Operating: < 80% to 30°C, < 70% to 40°C, < 40% to 50°C Storage: < 95%, non-condensing. A power-on stabilization period of four days may be required after extended storage at high temperature and humidity. |
| Safety | Designed to comply with UL311; IEC 348-1978; IEC 66E (CO)4; CSA 556B |
| Guard isolation | 20 volts |
| EMI/RFI | Designed to comply with FCC Rules Part 15, Subpart J, Class B; VDE 0871, Class B |
| Line Power | 47 to 63 Hz; + 10% allowed about selectable nominal line voltage:
100V, 110V, 115V, 120V, 200V, 220V, 230V, 240V -------------- Maximum power: 5700A/5720A: 300 VA;5725A, 750 VA |
| Size | Height 17.8 cm (7 in), standard rack increment, plus 1.5 cm (0.6 in) for feet; width 43.2 cm (17 in), standard rack width; depth 63.0 cm (24.8 in) overall; 57.8 cm (22.7 in), rack depth |
| Weight | 27 kg (62 lbs.) |