Fluke 6102 Micro-Bath Thermometer & Sensor Calibrator
Condition: Refurbished / Calibrated
Warranty: 1 YEAR WARRANTY
Shipping: USA & Worldwide
- Fluke 6102 Micro-Bath Thermometer & Sensor Calibrator (BC# 39939-L/T*)
- RS232 PC Interface Cable
- Power Cord
Fluke 6102 Micro-Bath Thermometer & Sensor Calibrator
Portability and extreme stability
Micro-Baths can be used anywhere for any type of sensor. The Model 6102 weighs 4.5 kg with the fluid. It’s lighter and smaller than most dry-wells and has a spill-proof lid. Micro-Baths can even be transported with fluid in them.
Display accuracy to ±0.25 °C for quick calibrations without a reference thermometer. With a 4.8 cm diameter, 14 cm deep tank, a MicroBath can calibrate any type of sensor including short, square, or odd-shaped sensors. The problems of fit and immersion are virtually eliminated by using a fluid medium rather than a dry-block calibrator. Micro-Baths are perfect for liquid-in-glass and bimetal thermometers.
All Micro-Baths have RS-232 ports and come with Interface-it software. Also included are contacts to Calibrate a thermal switch, eight set-point memory storage, ramp-rate adjust and over-temperature safety cutout.
Specifications:
| Range | 35 °C to 200 °C |
| Accuracy | ± 0.25 °C |
| Stability | ± 0.02 °C at 100 °C (oil 5013) ± 0.03 °C at 200 °C (oil 5013 |
| Uniformity | ± 0.02 °C |
| Resolution | 0.01 °C |
| Operating Temperature | 5 °C to 45 °C |
| Heating Time | 25 °C to 200 °C: 40 minutes |
| Cooling Time | 200 °C to 100 °C: 35 minutes |
| Well Size | 2.5 in dia. x 5.5 in deep (64 x 139 mm)(access opening is 1.9 in [48 mm] in diameter) |
| Size H x W x D | 26 x 14 x 20 cm |
| Weight | 4.5 kg with fluid |
| Volume | 0.75 L |
| Power | 230 VAC (± 10 %), 1.1 A, switchable, 50/60 Hz, 270 W |
| Computer Interface | RS-232 included with free Interface-it software |
| NIST-Traceable Calibration | Data at 50 °C, 100 °C, 150 °C, and 200 °C |