Fluke 7102 Micro-Bath Thermometer & Sensor Temperature Calibrator 7102-156
Condition: Refurbished / Calibrated
Warranty: 1 YEAR WARRANTY
Shipping: USA & Worldwide
- Fluke 7102 Micro-Bath Thermometer & Sensor Calibrator (BC# 40957-L/T*)
- Fluke 2082-P Test Lid
- RS232 PC Interface Cable
- Power Cord
Fluke 7102 Micro-Bath Thermometer
Portability and extreme stability
Micro-Baths can be used anywhere for any type of sensor. The Fluke 7103 extends from –30 °C to 125 °C. Stability, uniformity, and accuracy specifications cover the entire range for each bath, not just the best temperature.
Display accuracy to ±0.25 °C for quick calibrations without a reference thermometer. With a 4.8 cm diameter, 14 cm deep tank, a MicroBath can calibrate any type of sensor including short, square, or odd-shaped sensors. The problems of fit and immersion are virtually eliminated by using a fluid medium rather than a dry-block calibrator. Micro-Baths are perfect for liquid-in-glass and bimetal thermometers.
All Micro-Baths have RS-232 ports and come with Interface-it software. Also included are contacts to Calibrate a thermal switch, eight set-point memory storage, ramp-rate adjust and over-temperature safety cutout.
Specifications:
| Range | -5 °C to 125 °C |
| Accuracy | ± 0.25 °C |
| Stability | ± 0.015 °C at –5 °C (oil 5010 ± 0.03 °C at 121 °C (oil 5010) |
| Uniformity | ± 0.02 °C |
| Resolution | 0.01 °C |
| Operating Temperature | 5 °C to 45 °C |
| Heating Time | 25 °C to 100 °C: 30 minutes |
| Cooling Time | 25 °C to 0 °C: 30 minutes |
| Well Size | 2.5 in dia. x 5.5 in deep (64 x 139 mm)(access opening is 1.9 in [48 mm] in diameter) |
| Size H x W x D | 31 x 18 x 24 cm |
| Weight | 6.8 kg with fluid |
| Volume | 0.75 L |
| Power | 230 VAC (± 10 %), 0.9 A switchable, 50/60 Hz, 200 W |
| Computer Interface | RS-232 included with free Interface-it software |
| NIST-Traceable Calibration | Data at –5 °C, 25 °C, 55°C, 90 °C, and 121 °C |