Fluke 719 30G Electric Pressure Calibrator
$2,959.00
Availability:
In stock
SKU
2C31
Condition: Refubrished / Calibrated
Warranty: 1 YEAR WARRANTY
Shipping: USA & Worldwide
- Fluke 719 30G Electric Pressure Calibrator (BC# 26096-L/T*)
- (2) Fluke 1000V Hard Point Test Leads
- (2) Alligator Clips
- Strap For Unit
- Fluke Safety Info Guide
- Carrying Case (G)
Request a Quote for
Fluke 719 30G Pressure Calibrator
Fluke 719 Electric Pressure Calibrator provides pressure calibration using the programmable pump limit settings that eliminate over-pressurization.
One handed pressure calibration
With the innovative, built-in electric pump, the Fluke 719 provides pressure calibration at your fingertips! Now you can calibrate and test pressure devices quickly and easily with one hand, saving you valuable time. Use the programmable pump limit settings to eliminate overpressurization, and to set ﾑpump toﾒ pressure values. The unique cleanout port design reduces pump failures, and makes the 719 easy to clean without repair. The compact, lightweight form, combined with one-handed use, makes this pressure calibrator the ideal tool for busy process professionals.
Features:
Specifications:
For full Fluke 719 30G product specifications, please click here: Fluke 719 30G
Fluke 719 Electric Pressure Calibrator provides pressure calibration using the programmable pump limit settings that eliminate over-pressurization.
One handed pressure calibration
With the innovative, built-in electric pump, the Fluke 719 provides pressure calibration at your fingertips! Now you can calibrate and test pressure devices quickly and easily with one hand, saving you valuable time. Use the programmable pump limit settings to eliminate overpressurization, and to set ﾑpump toﾒ pressure values. The unique cleanout port design reduces pump failures, and makes the 719 easy to clean without repair. The compact, lightweight form, combined with one-handed use, makes this pressure calibrator the ideal tool for busy process professionals.
Features:
- Electric pump for one handed pressure calibration
- Best in class pressure measurement uncertainty of 0.025 %
- Measure and source mA with best in class 0.015 % accuracy
- Precision pressure adjust vernier
- Variable release rate bleed valve for easy pressure adjustment
- Ideal performance for high accuracy transmitter calibration
- 30 PSI pressure range
- Programmable pump limit:
- Eliminates over-pressurization
- Allows the user to program target pressures for pumping
- Extended measurement range with any of twenty-nine (29) 700Pxx Pressure Modules
- Source mA with simultaneous pressure measurement to test valves and I/Ps
- Simulate mA signals to troubleshoot 4-20 mA loops
- Test pressure switches with built in switch test function
- Power transmitters during test using 24 V loop supply
- Proven cleanout ports reduce pump failures
Specifications:
| General | |
| Storage temperature | -30°C to 60°C |
| Operating temperature | -10°C to 55°C |
| Relative humidity | 95% (-10°C to 30°C) 75% (30°C to 40°C) 45% (40°C to 50°C) 35% (50°C to 55°C) |
| Shock | 1 meter drop test |
| Safety | CSA C22.2 No. 1010.1:1992 |
| EMC | EN50082-1:1992 and EN55022:1994 Class B |
| Size (H x W x L) | 60 x 87 x 210 mm (2.19 x 3.41 x 8.28 in) |
| Weight | 912 g (2 lb) |
| Battery | Two 9 V alkaline batteries |
| Battery life | 12 hours with 12mA into 500 O, 200 pump cycles to 100 psi, 500 pump cycles to 30 psi |
| Specifications | |
| Range | -12 to 36 psi, -850 mbar to 2.4 bar |
| Resolution | 0.001 psi, 0.1 mbar |
| Accuracy | 0.025% range for 6 months 0.035% of range for one (1) year |
| mA | |
| Range | 0 to 24 mA |
| Resolution | 0.001 mA |
| Accuracy | .015% Rdg + 2 counts |
| Loop Supply | |
| Range | 24 V DC |
| Resolution | N/A |
| Accuracy | ±10% |
| Pump specifications | |
| Pump to | -30 psi in less than 15 seconds |
| Pump cycles between rebuilds | 5000 |
| Total pump life | 20,000 calibration cycle |
For full Fluke 719 30G product specifications, please click here: Fluke 719 30G