Fluke 719Pro 300G Electric Pressure Calibrator
$3,669.00
Availability:
In stock
SKU
2C46
Condition: Refurbished / Calibrated
Warranty: 1 YEAR WARRANTY
Shipping: USA & Worldwide
- Fluke 719Pro 300G Pressure Calibrator (BC# 50000-L/T*)
- Carrying Case w/ Strap
Request a Quote for
Fluke 719Pro 300G Pressure Calibrator
The 719Pro Electric Pressure Calibrator is the ideal test tool for calibrating high accuracy transmitters, pressure switches and pressure gauges.
The 719Pro includes a full functioning loop calibrator that sources, simulates and measures mA signals and more. The large backlit screen displays three parameters at once:
For full Fluke 719 Pro 300G product specifications, please click here: Fluke 719Pro 300G
The 719Pro Electric Pressure Calibrator is the ideal test tool for calibrating high accuracy transmitters, pressure switches and pressure gauges.
The 719Pro includes a full functioning loop calibrator that sources, simulates and measures mA signals and more. The large backlit screen displays three parameters at once:
- Pressure measurement from internal or external sensor
- Sourced/simulated or measured mA values
- Unique integrated electric pump for one handed pressure calibration
- Test pressure switches easily with easy-to-use switch test function
- Precision pressure adjust vernier for easy and accurate pressure calibration
- Ideal accuracy and performance (0.025 %) for reference class transmitter calibration
- 30 PSI, 150 PSI and the new 300 PSI pressure ranges
- Programmable pressure calibrator pump limit:
- eliminates over-pressurization
- allows the user to program target pressures for pumping
- Pump cleanout ports reduce pump failures from moisture and fluid damage
| Pressure measurement | Range | Resolution | Accuracy | Comment |
| Fluke-719Pro-300G | -12 to 300 PSI / -0.8 to 20 bar | -0.8 to 20 bar 0.01 PSI, 0.001 bar | ± 0.025 % of full scale, 6 months ± 0.035 % of full scale, 1 year |
Dry Air and non-corrosive gas only |
| Temperature effect (all ranges) | Add ± 0.002 % F.S./°C for temps outside of 15 °C to 35 °C | No effect on accuracy on all functions from 15 °C to 35 °C | ||
| Function | Range | Resolution | Accuracy (1 year) | Comment |
| mA dc (simulation and measurement) | 0-24 mA dc | 0.001 mA | ± 0.015 % of reading ± 2 counts | 1000 ohm maximum load in mA source, 26 V dc maximum voltage in mA simulate |
| Volts dc (measurement only) | 30 V dc | 0.001 V | ± 0.015 % of reading ± 2 counts | No AC voltage measurement, do not exceed 30 V dc |
| Temperature (measurement only, Pt100 RTD) | -50 to 150 °C (-50 °F to 302 °F) | 0.01 °C 0.01 °F | Temperature ± 0.1 °C (0.2 °F) | ± 0.25 °C (± 0.45 °F) combined uncertainty when using 720 RTD probe (optional accessory) |
| Loop power supply | 24 V dc | N/A | 24 mA at 24 V | |
| Temperature effect (all functions) | Add ± 0.002 % F.S./°C for temps outside of 15 °C to 35 °C | No effect on accuracy on all functions from 15 °C to 35 °C | ||
| Environmental | ||||
| Operating temperature | -10 °C to +50 °C | |||
| Storage with batteries per battery manufacturer’s specification within storage specification below | ||||
| Storage temperature (without batteries) | -20 °C to +60 °C | |||
| Power requirements | ||||
| Battery | Eight (8) standard Alkaline AA batteries | |||
| Battery life | 300 pump cycles to 150 PSI minimum; 1000 pump cycles to 30 PSI; 100 pump cycles to 300 PSI minimum |
|||
| Physical | ||||
| Dimensions (HxWxD) | 24.13 cm x 11.18 cm x 7 cm (9.5 in x 4.4 in x 2.8 in) | |||
| Weight | With holster 1.2 kg (2.5 lb) | |||
| Connections | ||||
| Pressure | 1/8 inch female NPT | |||
| Electrical | Standard banana jacks | |||
| RTD | 4 pin miniature circular | |||
| External module | 6 pin miniature circular | |||
| Engineering units (configurable) | ||||
| psi, bar, mbar, kPa, kgcm2 , cmH2O@4 °C, cmH2O@20 °C, mH2O@4 °C, mH2O@20 °C, inH2O@4 °C, inH2O@20 °C, inH2O@60 °F, mmHg@0 °C, inHg@0 °C, ftH2O@4 °C, ftH2O@20 °C, ftH2O@60 °F | ||||
For full Fluke 719 Pro 300G product specifications, please click here: Fluke 719Pro 300G