Fluke 729 Pro 7M -13 to 1000 PSI Automatic Pressure Calibrator
Condition: Refurbished / Calibrated
Warranty: 1 YEAR WARRANTY
Shipping: USA & Worldwide
- Fluke 729 Pro 7M -13 to 1000 PSI Automatic Pressure Calibrator (BC# -L/T)
- Test Leads
- User Manual On CD-ROM
- AC Adapter/Charger
- Carrying Case(G)
Fluke 729 Pro 7M -13 to 1000 psi Automatic Pressure Calibrator
The Fluke 729 Pro Automatic Pressure Calibrator is designed specifically for process technicians to simplify pressure calibration and provide faster, more accurate test results.
With an automatic internal electric pump, a target pressure can be set in 729 Pro, and the calibrator automatically pumps to the desired pressure. Then internal fine adjustment control automatically stabilizes and holds the pressure at the desired value.
The Fluke 729 Pro can also automatically test multiple pressure test points and automatically document the results. Calibration is as easy as typing in the starting and ending pressure, the number of test points and tolerance level; the 729 Pro does the rest.
Built-in HART communication capabilities enable HART transmitter mA adjustments, light HART configuration and the ability to adjust to applied 0% and 100% pressure values.
Fluke 729 Pro Key Features
- Automatic pressure generation and regulation to 1000 psi, 7 MPa
- Replaceable pressure control modules
- Fast to high pressure setpoints, get more done
- Built-in test template, easy one-button documented calibration
- HART communication
- Pressure leakage testing
- Automatic fine-pressure adjustment, automatic pressure stabilization
- Powerful Li-ion battery
- Extend measurement range with 750PSeries pressure modules
- Measure temperature with 720RTD probe
- Bright dual-three-channel/color graphic display
- Rugged and portable design
Fluke 729 Pro performs automatic pressure calibration with excellent portability of less than 5 kg. Engineers and technicians are no longer restricted by the environment and can perform efficient calibration at will. The 729 Pro can be widely used in electric power, petroleum, chemical, pharmaceutical, metrology, metallurgy, biology, food, transportation and automobile manufacturing.
Automatic pressure generation and regulation to 7 MPa (70 bar, 1000 psi). Enter a pressure up to 7 MPa and the 729 Pro will automatically pump to the desired pressure. The 729 Pro can also output changing pressure in step values or a linear ramp.
Easy calibration documentation using well-defined templates for transmitters and switches. Type in the starting and ending test pressures and number of test points, the 729 Pro does the rest by documenting the applied pressure, measured mA and % error for each test point. The bright color graphical display will flag test results that are out of tolerance in red.
Replaceable pressure control modules. Freely switch the pressure output range to achieve range matching without having to buy a complete new calibrator.
No tools required powerful Li-ion battery. The lithium battery equipped can be charged separately or with the device, along with a capacity indicator to confirm the power before installation. It is easy to replace the battery without any tools.
HART communication enables mA output trim, trimmed to applied values, and pressure zero trimming of HART pressure transmitters. You can easily change a transmitter tag, measurement units and ranges. Other supported HART commands include setting fixed mA outputs for troubleshooting, reading device configuration parameters and reading device diagnostics.
Specifications:
|
Key Parameters |
|
|
Pressure control range |
(-13 to 1000) psi |
|
Pressure type |
Gauge/absolute (Depends on the type of pressure module) |
|
Control stability |
-0.005 % of FS, minimum |
|
Built-in replaceable pressure control modules |
6 modules |
|
External pressure measurement modules |
750 Series pressure modules, 50 models ranging from 0 to 1 in H2O, 2.5 mbar, 250 Pa to 10,000 psi, 70 bar, 7 MPa |
|
mA sourcing/measurement |
Yes |
|
Voltage measurement |
Yes |
|
Loop power |
24 V dc |
|
One-key calibration |
Task templates make documented automatic calibrations easy. |
|
Pressure switch testing |
Yes |
|
Pressure leakage testing |
Yes |
|
HART |
Yes |
|
Autostep/auto ramp |
Yes (with customizable speed, mode and style) |
|
Log function |
Yes |
|
Software |
DPCTrack2 Calibration and Asset Management Software |
|
One-key pressure-relief |
Yes (muffler) |
|
Battery |
Rechargeable lithium battery with capacity indication |
|
General specifications |
|
|
Pressure specification |
|
|
1-year specifications |
0.02 % of FS |
|
Control specifications |
0.005 % of FS |
|
Electrical specification |
|
|
mA measure, source and simulate |
0 mA to 24 mA (resolution of 1 μA) |
|
Volts dc measurement |
0 V dc to 30 V dc (resolution of 1 mV) |
|
Accuracy |
0.01 % FS ± 2 LSD (23 °C ± 5 °C) |
|
Stability |
20 ppm FS/°C (-10 °C to +18 °C and 28 °C to 50 °C) |
|
Loop compliance voltage |
24 V dc @ 20 mA |
|
mA simulation working voltage |
12 V dc to 30 V dc |
|
Temperature measurement, 100 Ω Pt (385) RTD |
-50 °C to +150 °C (-58 °F to 302 °F) |
|
Temperature resolution |
0.01 °C (0.01 °F) |
|
Temperature accuracy |
± 0.1 °C (0.2 °F) ± 0.25 °C (± 0.45 °F) combined uncertainty |
|
Drive capability (mA source) |
1200 Ω (without HART resistor), 950 Ω (with internal HART resistor) |