Replacement Black Box MicroScanner Cat5 10/100 Network Tester (*NO WireMap Adapter*)
$195.00
Availability:
In stock
SKU
1H334
Condition: Refurbished
Warranty: 1 YEAR WARRANTY
Product Capabilities
"The essential all-in-one network tester"
The Microscanner TDR checks length, wiremap, continuity, opens, shorts and crossed and split pairs.It also generates multiple tones for use with a cable tracer. The optional office identifier kit is used when patch panel prots or wall jacks are unmarked.
The Microscanner Toner function allows to generate tones to locate hidden cables in walls, ceilings; or identify one in a bundle. An optional probe such as our Intellitone or equivalent is required to detect the tones.
Specifications:
Power Source
Identify cable links from the wiring closet to the office using the optional Office Identifier plugs
Generate audible frequency tones detectable by standard tracer probes
For full Microtest Microscanner product specifications, please click here: Microtest Microscanner
"The essential all-in-one network tester"
The Microscanner TDR checks length, wiremap, continuity, opens, shorts and crossed and split pairs.It also generates multiple tones for use with a cable tracer. The optional office identifier kit is used when patch panel prots or wall jacks are unmarked.
The Microscanner Toner function allows to generate tones to locate hidden cables in walls, ceilings; or identify one in a bundle. An optional probe such as our Intellitone or equivalent is required to detect the tones.
Specifications:
Power Source
- Battery: 9-Volt alkaline battery
- Low battery: Low battery indication on display
- Operating Temperature: 0° to 50° C (32° to 122° F)
- Storage Temperature: -10° to 55° C (14° to 131° F)
- Humidity: 10 to 90% non-condensing User Interface
- Display: Custom LCD, 1.75ﾔ x .85ﾔ
- Keypad: 4 button keypad
- Shielded and Unshielded Twisted Pair cable
- Main: Modular 8 connector for length, wire map, office identifier, toner
- Loopback: Modular 8 connector used for patch cable wire map
- Measures length on all 4 pairs and displays in feet or meters Checks for opens, shorts and connections to a HUB (10BaseT / Token Ring)
- Maximum length: 1500 ft. (457m)
- Resolution: 1 ft.
- Modes:
- User Selectable NVP
- NVP Calculation based on known cable length:
- Minimum length: 50 ft. (15 m)
- Maximum length: 1500 ft. (457m)
- Wiremap checks end-to-end continuity on all four wire pairs (Wiremap adapter required)
- Opens
- Shorts
- Reversed pairs
- Swapped pairs
- Split pairs
- Distance Maximum length: 656 ft. (200 m)
Identify cable links from the wiring closet to the office using the optional Office Identifier plugs
- 12 passive test plugs attached to far end (identified as 1 through 12)
- Requires minimum 12/36 or 36/45 pairs in cable
- Distance Maximum length: 656 ft. (200 m)
Generate audible frequency tones detectable by standard tracer probes
- Frequency: User may select 1 of 4 predefined tone sequences
- Interface: Main Mod8 port for tone generation on all 4 pairs. Ground jack provided for grounding MICROSCANNER during trace operations.
- The test interface withstands input hazard conditions that arise from normal telephone interfaces (48 VDC at less than 80 mA) or 24 VAC power used to power many telephone keysets.
For full Microtest Microscanner product specifications, please click here: Microtest Microscanner
Black Box MICROSCANNER Replacement Unit
The WireMap Adapter Needed For Testing Is Not Included!
Black Box Fluke Microtest MicroScanner Micro-Scanner Network Cable Tester Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 38157-L/T*
- Black Box MicroScanner 10/100 Cable Verifier Replacement Unit (BC# 38157-L/T*)
- Ethernet Cable
- Hard Copy User Manual
- Carrying Case (G)
Request a Quote for