Fluke Networks 682 LANMeter Cat5e Network Analyzer
Condition: Refurbished / Calibrated
Warranty: 1 YEAR WARRANTY
Fluke 682 Enterprise LANMeter
LANMeter Instrument Network Configuration
| Model # | 10 Mbps Ethernet |
100 Mbps Ethernet |
4 Mbps Token Ring |
16 Mbps Token Ring |
| 682 | YES | No | No | No |
The first and only portable troubleshooting tools specifically designed to help network managers see across routers to view events on managed networks
The Fluke LANMeter series of handheld testers now makes testing and troubleshooting complicated networks faster and easier than ever before.
Modern Tools for Modern Networks
Today?s diverse super-segmented WANs are loaded with managed hubs, switches, and routers, all scattered over remote sites, making it almost impossible to ?see? where problems are originating. Unlike protocol analyzers the Enterprise LANMeter gives managers of these modern networks the fast answers they need.
Ease of Use
From the moment you pick it up, you will find the LANMeter?s front panel simple, straightforward and fast to use. Five dynamically labeled soft function keys put you in control of the intuitive menu system, and status LED indicators reflect the most common local segment problems. It also contains an extensive context sensitive help file system.
New Device Verification
Minimize installation problems by using the LANMeter to verify correct operation of network interface cards, cabling and hubs or MAUs before they have a chance to impact network operation. Verify connectivity and access to key network resources through LAN and WAN connections with protocol-specific ping tests.
Quick Problem Isolation
The unique functionality of the LANMeter series allows you to quickly isolate the most common problems that occur on an Ethernet or Token Ring network. The Fluke LANMeter is the only single instrument in a handheld package capable of pinpointing network, component and cable problems.
Distributed Testing
The Enterprise LANMeter provides more flexibility in solving network problems by combining portability with remote access and control. With the WebRemote Control Option for Enterprise LANMeter, you can take full control of a 68x Enterprise LANMeter via a Netscape or Microsoft web browser anywhere on the network. No more running back and forth to the physical location of an intermittent problem hoping to be there when the problem occurs again. Just place the LANMeter near the source of the problem, point your web browser to the IP address of the LANMeter and monitor the situation from your office.
TCP / IP
Fluke has substantially enhanced support for today?s growing TCP/ IP networks. TCP/IP has rapidly become the most important network protocol for many enterprise- wide networks. The Enterprise LANMeter provides features designed to show key IP network configuration information that is necessary to troubleshoot connectivity and configuration problems in IP networks. In addition, Enterprise LANMeter can use SNMP commands to retrieve configuration and status information, such as route table and bridge forward table, to further facilitate quick diagnostic of network problems in switched or routed environment.
SNMP
The Enterprise LANMeter is the first portable tool to include SNMP-based troubleshooting capabilities, in an easy-to-use format to reach beyond the attached LAN segment. The unique capability to query via SNMP (including MIB I, II and RMON queries) allows access to information that already exists in managed devices throughout the entire network.
Support You Can Count On The LANMeter analyzer?s Flash ROM Technology protects your investment by allowing quick and easy software updates from your PC. If anything should go wrong, you can count on Fluke?s worldwide service and support to get you up and running fast.
Ethernet
HUB Autotest Tests new or suspected faulty hub and switch ports for correct operation by testing for the presence and polarity of link pulses, offered auto negotiation capabilities and for hub transmit levels. Protocols detected are identified, and selected local IP hosts and IPX servers are queried to ensure connectivity. Cable tests are performed when a cable fault is suspected.
Wire Map
Checks for miswires and for intermediate opens and shorts on twisted pair cable. A pin-by-pin connection list is displayed.
Cable Identifier
Used to map UTP drop and lobe cables to individual offices from the wiring closet. Unique Cable Identifier Remote Units are identified and displayed in the order detected. Up to thirteen identifiers can be connected.
Fluke 682 LANMeter (Ethernet) General Specifications
| Dimensions | 29.2 x 17.8 x 6.7 cm (11.9 x 7.0 x 2.65 in) |
| Weight | 2 kg (4.5 lbs) |
| Keyboard | 36 key Elastomeric with alphanumeric and dedicated keys. |
| Display | 240 x 128 pixel bitmapped LCD. (W x H) 12 x 6.5 cm (4.75 x 2.5 in) |
| LED Indicators: | Nineteen light emitting diodes |
| Power | Removable/rechargeable NiCad (9 Sub-C Cells) with average three hours operating time. Recharges in three hours. Note: Continuous use of the display backlight will reduce battery operating time by approximately 33%. |
| Communication Port: | RS-232C Serial Port (DB-9) |
| Network Ports (Ethernet) | HUB Connector (RJ-45) NIC Connector (RJ-45) BNC (ThinLAN) |
| Operating Temperature: | 10 to 30°C |
For full Fluke Networks 682 LANMeter product specifications, please click here: Fluke Networks 682 LAN Meter
FLUKE 682 LANMeter Network Analyzer w/ SwitchWizard Option
The Fluke LANMeter is the only single instrument in a handheld package capable of pinpointing network, component and cable problems
Includes Carrying Case & Accessories As Listed
682LANMeter
Fluke Networks 682 LANMeter 682LANMeter Network Analyzer Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 00819
- Fluke Networks 682 LANMeter w/ Option: (BC# 00819-L/T*)
- SwitchWizard
- (2) Ethernet Cables
- BNC Cable
- AC Adapter/Charger
- Power Cord
- RS232 PC Interface Cable
- User Manual On CD-ROM
- Carrying Case (G)