Fluke 99 ScopeMeter Series II 50 MHz Oscilloscope
$595.00
Availability:
Out of stock
SKU
11H63
Condition: Refurbished / Calibrated
Warranty: 1 YEAR WARRANTY
Shipping: USA & Worldwide
Request a Quote for
- Fluke 99 ScopeMeter Series II Oscilloscope (BC# 24053M-L/T*)
- (2) Fluke Voltage Probes
- (2) 1000V Hard Point Test Leads
- AC Adapter/Charger
- Hard Copy User Manual
- Carrying Case (G)
Fluke 99 ScopeMeter Series II
Your ScopeMeter test tool combines the capabilities of an easy-to-use digital storage oscilloscope with the versatility of a digital multimeter. When you select a measurement function, the test tool automatically chooses the best setup to analyze and compare complex waveforms, or simply to read voltage levels.
Features:
Your ScopeMeter test tool combines the capabilities of an easy-to-use digital storage oscilloscope with the versatility of a digital multimeter. When you select a measurement function, the test tool automatically chooses the best setup to analyze and compare complex waveforms, or simply to read voltage levels.
Features:
- Digital Storage Oscilloscope
- 3 2/3-digit, 5-MHz Digital MultiMeter (DMM).
- Battery power.
- Measure menu for quick setup.
- Continuous Auto Set function for hands-off signal probing.
- Large memory for front panel Setups, Waveforms, and Screens.
- Min Max TrendPlot function with time stamp for long term recording.
- Optical to RS-232 interface port, 600V isolation
- Instant Information key.
| Vertical | |
| Frequency Response, -3 dB | DC to >50 MHz |
| AC coupled | <10 Hz direct, <1 Hz with 10:1 probe |
| Coupling | AC, DC, Ground |
| Rise Time | <7 ns |
| Sensitivity | 1 mV to 100 V/div to 1 kV/div with 10:1 probe |
| Current probe scaling | 1 mA/div to 100,000 A/div |
| Modes | A, -A, B, -B, A+B, A-B, A=x B=y |
| Input Impedance | 1 M?//25 pF direct, 10 M?//15 pF with 10:1 probe |
| Vertical Resolution | 8 bit (256 levels) |
| Accuracy | ±(2% +1 pixel), add 3% for 1 and 2 mV/div |
| Horizontal | |
| Modes | Recurrent, Single Shot, Roll |
| Recurrent | 10 ns to 1 s/div |
| Dual input alternating | 5 ns (10 ns) to 20 µs/div |
| Dual input chopped | 50 µs to 1 s/div |
| Single Shot | 100 ns to 1 s/div |
| Dual input alternating | 100 ns to 20 µs/div |
| Dual input chopped | 50 µs to 1 s/div |
| Roll | 2 s to 60 s/div |
| Dual input chopped | 2 s to 60 s/div |
| Accuracy | +(0.1% + 1 pixel) |
| Record Length | 256 or 512 samples (10 or 20 division) |
| GENERAL | |
| Display | Super Twisted Liquid Crystal |
| Size | 84 x 84 mm (4.7" diagonal) |
| Resolution | 240 x 240 pixels, 25 pixels/div. in SCOPE mode |
| Contrast | User adjustable |
| Backlight | Electroluminescent |
| Power | |
| Internal Battery Pack | NiCad 4.8V nominal |
| Operating Time | Typical 4 hours |
| Power Adapter/Battery Charger | Charging Time: Typical 16 hours |
| Alternate battery | 4 Alkaline C cells (nonrechargable) |
| External Supply | 8 to 20V DC, 5W typical via 5 mm jack |
| Memory back-up battery | CR2032 |
| Environmental | |
| Temperature | Operating: 0 °C to 50 °C Storage: -20 °C to 70 °C |
| Humidity | Operating: 20 °C to 30 °C, 90% RH noncondensing 30 °C to 50 °C, 70% RH noncondensing Storage: 95% RH |
| Altitude | Operating: 3 km (10,000ft) Storage: 12 km (40,000ft) |
| Shock and Vibration | per MIL-T-28800 for Class 3 |
| Electromagnetic Interference | per MIL STD 461 |
| Mechanical | |
| Size excluding holster | 60 x 130 x 260 mm (2.4 x 5.1 x 10.2 inches) |
| Size including holster | 65 x 140 x 275 mm (2.5 x 5.5 x 10.8 inches) |
| Weight excluding holster | 1.5 kg (3.3 lbs) |
| Weight including holster | 1.8 kg (4.0 lbs) |
| Safety | |
| MAX. Input voltage on INPUT A or INPUT B | 300V rms, 600V rms with 10:1 probe |
| MAX. Input voltage on EXTernal input | 300 V rms |
| Surge Protection | 4 kV, 6 kV with 10:1 probe per IEC 664 and ANSI/IEEE C62.41 test method |
| Maximum Isolation to Earth | 600V rms from any terminal |
| Optical Interface | Optically Isolated to 600V rms |