Fluke Networks CIQ-KIT CableIQ Advanced IT Kit

At a Glance

• Qualifies - Sees if your existing cabling has the bandwidth to support voice, 10/100, VoIP or Gigabit Ethernet
• Troubleshoots - shows why existing cabling cannot support the network's bandwidth requirement (e.g. crosstalk at 11 meters)
• Discovers - detects what's at the end of any cable and displays device configuration (speed/duplex/pairing)
• Identifies unused switch ports that can be reallocated
• Graphically maps wiring configuration and shows distance to faults with Intelligent Wiremap
• Tests all copper cabling media: twisted-pair, coax, and audio cabling

Product Capabilities

The network tech's vision into cabling bandwidth
CableIQ is the first cabling bandwidth tester for network technicians. It gives even the most novice tech the vision to see what speeds existing cabling can support, quickly isolate cabling from network problems, and discover what is at the far end of any cable. That means network techs can close trouble tickets faster, reduce on-call time, and save money by better utilizing their existing infrastructure.

Reduce escalated problems by as much as 30%
CableIQ's powerful troubleshooting capability and intuitive interface enable your frontline technicians to identify and troubleshoot a wider range of problems within your infrastructure. Is the port active? Are the duplex settings matched? Is it a network problem or a cable problem? Can the cable support the required network bandwidth? CableIQ is the only tool that can answer all these questions before trouble tickets are escalated to the next level reducing problem escalation by up to 30%.

Coax cable testing
Now thereﾒs a multifunctional tester for all home cabling media. With the prominence of coax in the home, you need a tool that can quickly and easily test quality of coax cabling, and verify whether video outlets are live or not. The CableIQﾙ Qualification Tester gives you several ways to test coax cabling.

Intelligent wiremap
The CableIQﾙ Testerﾒs ﾓintelligent wiremapﾔ feature tests for length, shorts, split pairs, or opens and displays with an intuitive graphical interface where a fault is located. Unlike other testers that just show a series of numbers for a wiremap, the unit displays an easy-to-read graph with distance to faults proportional to the cable length. It also identifies breaks and shorts by pin, rather than by pair. This dramatically reduces the time to locate and troubleshoot a poorly terminated jack, or a break in the middle of a cable.

Telephone wire test
CableIQ testerﾒs ﾓmulti-mapﾔ is a breakthrough feature for residential cable testing. Smart cable identifiers give the unique ability to wiremap star wiring configurations often found in residential voice systems. Wiremap faults and ID number (up to seven) of any jack can be seen from the main unit, all at once.

Specifications:

IntelliTone Pro 200 Probe

Main Features

• IntelliTone 200 Probe locates and isolates hidden or bundled voice data and video cables quickly and reliably even on active networks

Get advanced SuperVision for locating cable hidden in floors, ceilings, walls and in bundles The IntelliToneﾙ Pro Toner and Probe Series from Fluke Networks is the first toner and probe to offer digital and analog signaling all in one tool. That means itﾒs equipped with the most powerful cable location technologies for any work environment. Use digital mode to trace and locate data cabling safely and effectively on active networks. Use analog mode to isolate individual wire pairs, and trace voice, audio, and video cabling.

The IntelliToneﾙ Pro Toner and Probe Series from Fluke Networks gives you superior vision for locating cables hidden in floors, ceilings, walls, and in bundles. Its breakthrough digital technology makes it the first tool to tone and trace safely and effectively on active networks.

The IntelliTone Pro 200 Probe features a CABLEMAP capability that identifies common cable miswires in twisted pair cabling. Complete per-pin verification of TIA568 wiring identifies the exact wire that is open, shorted or miswired. LED lights and distinctive tones clearly indicate miswires. The built-in Cablemap feature eliminates the need to carry separate tools or returning to the far-end to replace the toner with a mapper. The IntelliTone Pro 200 Kit is the all-in-one tool to locate and map Category 5 cabling even when plugged into a switch, and verify link service after moves, adds and changes.

The IntelliToneﾙ Probe's signal selection thumbwheel lets you choose which tone type to use. Controlled LED signal indicators and audio tones simplify signal interpretation and take the guesswork out of cable location, reducing even the toughest locating problems into a few minutes' work.
 

Having trouble viewing this file? Click this link to download