Fluke DSP-4000 Cable Analyzer w/ FTA430 FTA410

Fluke Networks DSP-4000 Digital Cable Analyzer

Test, certify and document fiber and copper with DSP Series Superior diagnostics make troubleshooting fast and easy Universal Permanent Link Adapter delivers more passes and eliminates false failures Powerful Fiber Test Adapters perform dual-fiber, dual-wavelength fiber certification Easily manage and document copper and fiber links with new LinkWareﾙ Software Product Capabilities

Certify Cat 5e/6 cabling systems with DSP-4000 CableAnalyzer Series

The DSP-4000 CableAnalyzer Series for several years has occupied the top level in the industry of cabling certification tools. The testers in this series provide accurate testing of Cat 5e and Cat 6 twisted-pair cabling as well as loss testing of fiber optic cabling.

The DSP-4000 Series is based on an exclusive digital signal processing test platform that provides a complete and accurate solution for certifying, documenting and troubleshooting twisted-pair copper cabling links from Cat 3 through Cat 6. Three sets of fiber optic test adapters can be combined with any of the DSP-4000 Series testers to provide automatic optical loss testing for horizontal or backbone fiber cabling. And like all Fluke Networks instruments, the DSP-4000 series products are built rugged to withstand drops and other mishaps that occur in today's network installation environments.

Product Capabilities
Fluke Networks' Fiber Test Kit measures power or power loss in optical fiber links used in premise wiring and LAN networks.

Manage Test Results

You can record and store any combination of copper or fiber optic Autotest reports with the Fluke DSP-4000 tester. Each test report can be assigned a unique, user-definable label, and can be downloaded to a PC or printed directly from the cable tester to a serial printer.

Test reports contain wavelength, measured loss, loss limit, test direction and reference level. The fiber test results may be saved in the tester's memory using a cable name of up to 18 characters long.

DSP-FTA430 Singlemode Fiber Module

Fluke FTA-430 Fiber Module, Fluke Networks keeps its eye on the future - so you don't have to. Powerful, High Definition Diagnostics

Complete solution for testing and certifying high-speed Fiber Networks

Fluke Networks offers the most complete line of Fiber Test Adapters for testing and certifying Single mode, Gigabit and Single-Mode fiber optic cabling systems. These Fiber Test Adapters are high-performance, high-productivity fiber test options for the DSP-4000, DSP-4100 and DSP-4300 Digital CableAnalyzers.

DSP-FTA430 Singlemode Fiber Test Adapter

Uses light sources at 1310 nm and 1550 nm wavelenghts

Test one fiber and two wavelengths simultaneously, automatically saving the test results.
Perform bi-directional testing on both fibers under test and save results for both in one record.
Utilize Fluke Networks' CableManager Software for comprehensive results management and report generation.
Automatically measure length and propagation delay along with loss.
Verify optical connectivity and determine which fibers go to which connectors at a patch panel.
Communicate with a person on the other end of the fiber.
Track the maximum and minimum power throughput of the test.
Withstand drops and other mishaps that occur on the job.

DSP-FTA430 Specifications


General Specifications

Power supply: ±6 V supplied by the DSP-4000 test tool.
Temperature range: Operating: 0 ºC to +40 ºC; Storage: -10 ºC to +60 ºC
Warm-up time: 5 minutes
Humidity range: Operating: 0 % to 75 % RH, non-condensing
Storage: 0 % to 95 % RH, non-condensing
Dimensions: 3.3ﾔ x 4.6ﾔ x 1.9ﾔ (8.3 cm x 11.6 cm x 4.7 cm)
Weight: 7.6 oz (215 g)


Optical Transmitter

Connector: SC, multimode
Emitter type:
FTA420 - Multimode LED
FTA430 - Singlemode laser
FTA440 - 850 nm Vertical Cavity Surface Emitting Laser (VCSEL);
1310 nm FP laser
Wavelengths:
FTA420 - 850 nm and 1300 nm
FTA430 - 1310 nm and 1550 nm
FTA 440 - 850nm and 1310 nm
Power output:
FTA420 -20 dBm (10 mW), typical (into 62.5/125 mm fiber)
FTA430 and FTA440 -10 dBm
Power output stability (8 hours): ±0.25 dB at 23 °C


Optical Receiver

Power measurement accuracy: ±0.25 dBm at 23 °C, 45 % RH to 75 % RH, -20
dBm for 850 nm and 1300 nm, -10 dBm for 1550 and 1625 nm
Connector: SC, multimode or singlemode
Detector type: InGaAs
Calibrated wavelengths: 850 nm, 1300 nm, 1310 nm, 1550 and 1625 nm.
Power measurement range: +3 dBm to -50 dBm
Power measurement linearity: ±0.25 dB at 23 °C
Length Measurement:
Measured in Loopback Mode
FTA420 - 5000 meters of 62.5 um multimode cable
FTA430 - 10000 meters of singlemode cable
FTA440 - 5000 meters of 50.0 um multimode cable
Length measurement accuracy: ±1.5 m plus 2 % of length

DSP FTA-410 Fiber Adapters
The DSP-FTA410 Fiber Test Adapter lets you use a DSP-4000 CableAnalyzer test tool to test and certify fiber optic cable installations. The fiber test adapter includes the following features: Autotest function measures optical power loss (at 850 nm and 1300 nm) and length on dual-fiber multimode links.

DSP-FTA410 Specifications

General Specifications

Power supply: ±6 V supplied by the DSP-4000 test tool.
Temperature range: Operating: 0 ºC to +40 ºC; Storage: -10 ºC to +60 ºC
Warm-up time: 5 minutes
Humidity range: Operating: 0 % to 75 % RH, non-condensing
Storage: 0 % to 95 % RH, non-condensing
Dimensions: 3.3ﾔ x 4.6ﾔ x 1.9ﾔ (8.3 cm x 11.6 cm x 4.7 cm)
Weight: 7.6 oz (215 g)


Optical Transmitter

Connector: SC, multimode
Emitter type: LED
Wavelengths: 850 nm and 1300 nm
Power output at 850 nm and 1300 nm: -20 dBm (10 mW), typical
(into 62.5/125 mm fiber)
Power output stability (8 hours) at 850 nm and 1300 nm: ±0.25 dB at 23 °C


Optical Receiver

Power measurement accuracy: ±0.25 dBm at 23 °C, 45 % RH to 75 % RH, -20
dBm for 850 nm and 1300 nm, -10 dBm for 1550 nm
Connector: SC, multimode or singlemode
Detector type: Germanium
Calibrated wavelengths: 850 nm, 1300 nm, 1310 nm, and 1550 nm
Measurement range: 0 dBm to -40 dBm
Power measurement linearity: ±0.25 dB at 23 °C
Length measurement accuracy: ±1.5 m plus 2 % of length



For full Fluke Networks DSP-4000 DSP-FTA430 DSP-FTA410 product specifications, please click here: Fluke Networks DSP-4000 DSP-FTA430 DSP-FTA410

Having trouble viewing this file? Click this link to download