On Sale! Fluke Networks DSP-4300 FTA-410 MM LAN Cable Certifier Model DSP4300 FTA410 Fluke Networks 4300 410

Fluke Networks DSP-4300 Digital Cable Analyzer

It exceeds the Cat 5, Cat 5e, and Cat 6 specifications, achieving Level III accuracy. It also features automatic diagnosing of cable faults, and tells you exactly where the fault is in meters or feet. It is comparable in performance to most desktop models, with the added benefit of being handheld.

With its large on-board memory, you can store a full day's results inside, or detach the multimedia card and plug it into your PC. Featuring Fluke Corporation's LinkWare Cable Test Management software, you can easily review and analyze results for both fiber and copper. Software allows you to edit, view, print, and archive your data. You can then export the data to a PDF.

With the DSP-4300, you can monitor traffic through your Ethernet. Regardless on whether you're using 10BASE-T or 100BASE-TX, you can detect and measure impulse noise better than any other tester on the market. You can also identify hub port connections and tell what standard is met by the respective connections.

The DSP-4000 Series can boost your bottom line by providing fast, accurate testing of high-performance Cat 5e, Cat 6 and fiber optic cabling. Equipped with an exclusive digital platform, this series of testers ensures repeatable accuracy, no matter how many times you retest a link. With high-bandwidth test capabilities to 350 MHz, superior diagnostics and extensive reporting, the DSP-4000 Series provides you with a complete solution for testing, certifying and documenting copper and fiber. And like all Fluke Networks instruments, they're built rugged to withstand the drops and other mishaps that occur in today's network installation environments. The DSP-4300 is the most comprehensive cable testing and certification solution for high-speed copper and fiber networks available.

DSP FTA-410 Fiber Adapters The DSP-FTA410 Fiber Test Adapter lets you use a DSP-4000 CableAnalyzer test tool to test and certify fiber optic cable installations. The fiber test adapter includes the following features: Autotest function measures optical power loss (at 850 nm and 1300 nm) and length on dual-fiber multimode links.

DSP-FTA410 Specifications

General Specifications

Power supply: ±6 V supplied by the DSP-4000 test tool.
Temperature range: Operating: 0 ºC to +40 ºC; Storage: -10 ºC to +60 ºC
Warm-up time: 5 minutes
Humidity range: Operating: 0 % to 75 % RH, non-condensing
Storage: 0 % to 95 % RH, non-condensing
Dimensions: 3.3ﾔ x 4.6ﾔ x 1.9ﾔ (8.3 cm x 11.6 cm x 4.7 cm)
Weight: 7.6 oz (215 g)

Optical Transmitter

Connector: SC, multimode
Emitter type: LED
Wavelengths: 850 nm and 1300 nm
Power output at 850 nm and 1300 nm: -20 dBm (10 mW), typical
(into 62.5/125 mm fiber)
Power output stability (8 hours) at 850 nm and 1300 nm: ±0.25 dB at 23 °C

Optical Receiver

Power measurement accuracy: ±0.25 dBm at 23 °C, 45 % RH to 75 % RH, -20
dBm for 850 nm and 1300 nm, -10 dBm for 1550 nm
Connector: SC, multimode or singlemode
Detector type: Germanium
Calibrated wavelengths: 850 nm, 1300 nm, 1310 nm, and 1550 nm
Measurement range: 0 dBm to -40 dBm
Power measurement linearity: ±0.25 dB at 23 °C
Length measurement accuracy: ±1.5 m plus 2 % of length

For full Fluke Networks DSP-4300 DSP-FTA410 product specifications, please click here: Fluke Networks DSP-4300 DSP-FTA410

Additional Information

Fluke Networks DSP-4300 CAT5 / CAT5e / CAT6 Digital Cable Analyzer with Fluke Networks DSP-FTA410 Multimode 850nm / 1300nm Fiber Module Set

DSP-FTA410 Autotest function measures optical power loss (at 850 nm and 1300 nm) and length on dual-fiber multimode links.

Includes Carrying Case And Accessories As Listed!

DSP4300 DSP 4300 FTA410 FTA 410

Fluke Networks DSP-4300 FTA-410 DSP4300 FTA410 MM Fiber Cable Analyzer Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

Included