Fluke Networks Fiber OneShot SM Optical Test Set
Condition: Refurbished
Warranty: 1 YEAR WARRANTY
Shipping: USA & Worldwide
- Fluke Networks Fiber OneShot Optical Test Set (BC# 22585-L/T*)
- SC Connector
- (2) SM SC-SC Fiber Cable
- User Manual On CD-ROM
- Hard Copy User Manual
- Carrying Case (G)
Fluke Networks Fiber OneShot Optical Test Set
Introducing the new innovative, pocket-size Fiber OneShot Optical Test Set. Bringing you a simple test set for traditionally complex single-mode fiber testing. Designed with an intuitive one button test capability, you are testing in just a few seconds. Quickly and accurately verify if a fiber is active, find the distance to a break or end, dirty end face or reflective event. This test set goes from zero to 9,999 feet, with no dead zone. For testing at the central office, node, hub, drop & optical network terminal (ONT);
Fast testing for essential fiber troubleshooting
Fast testing for essential fiber troubleshooting:
- Light or No light ﾖ is my fiber active? CheckActive alert
- Distance to event (fault): Dirty end face/bulkhead and break or reflective event
- Distance to event (end): End of fiber
Durability for the outside plant environment
Built to last, the Fiber OneShot incorporates an energy-absorbing holster over an impact-resistant case to withstand drops, impacts, and the tough outside plant environment. Together with a heavy duty tethered end cap to protect the fiber adapter, the Fiber OneShot is the test set for demanding field applications, ensuring trouble-free operation.
Testing benefits that increase your productivity:
- Measure the length to a break, end, dirty end face/bulkhead, or reflective event quickly and accurately from 0 ﾖ 9,999 feet (note* 0 ﾖ 6,000 meters displayed in metric mode)
- New CheckActiveﾙ feature: alerts the user if an optical signal is on the fiber
- Instant-on: no boot/load time
- Single button testing: essential fiber testing in just a few seconds
- No dead zone: locate fiber faults at 1-meter
Features:
- Essential fiber test results displayed numerically, no interpretation needed
- Extra large liquid crystal display (LCD) with programmable backlight for use in any environment
- Auto shut down to extend battery life
- Battery life gauge
- Extended battery life, up to 5,000 tests
- Field-replaceable (2) AA batteries
- Quick change battery compartment, no screwdriver needed
- Removable/cleanable SC adapter
- Self calibrating, factory calibration not required
- Adjustable feet/metric mode
- Adjustable APC/UPC mode
- Adjustable index of refraction (I.O.R.) mode
- Output wavelengths 1310 nm ± 25 nm
Specifications:
| Operating temperature with the battery | 0ºC to 50ºC |
| Non-operating temperature | -20ºC to 60ºC |
| Operating relative humidity (without condensation) |
95% (10ºC to 35ºC) 75% (35ºC to 40ºC) uncontrolled < 10ºC |
| Vibration | Random, 5 Hz to 500 Hz, MIL-PRF-28800F CLASS 2 |
| Shock | 1 meter drop test |
| UPC or APC open Break Reflective incident Poor bulkhead connection | BREAK OR END OF FIBER 0 ft/m (Will not measure a splice loss, connector loss, bend loss, or fiber attenuation.) |
| LCD type | Backlit black and white (segments) |
| Index of refraction range | 1.45 to 1.5 (factory default is 1.468) |
| Auto turn off | Automatically turns off after 5 minutes if no keys are pressed. |
| Factory calibration interval | None |
| Output wavelengths | 1310 nm ± 25 nm |
| Emitter type | Fabry-Perot laser diode connected to 9/125 µm fiber |
| Laser classification | Class 1 CDRH Complies to EN 60825-2 |
| Pulse widths | 20 ns to 500 ns |
| Power into fiber under test | > 10 mW-pk |
| Dynamic range | > 11 dB |
| Distance to first reflective open | 1 m |
| Photodiode | 40 µm ﾖ 80 µm, PIN InGaAs |
| Safety | CSA C22.2 No. 61010.1:04, EN 61010-1 2nd Edition 2001, EN60825-1, 2:2006 |
| Altitude | 3000 m |
| EMC | EN 61326-1: 2004 |
| Sampling spacing | 12.5 cm to 1 m (1.25 ns to 10 ns) |
| Instrument reporting information | Distance to the first reflective incident and/or end of fiber |
| Maximum distance | 6000 meters or 9999 feet |
| Distance accuracy (0 m to 3000 m or 0 ft to 9999 ft) | ± 1 m for reflective incidents, ± 0.1% of length6 ± 3 m for non-reflective incidents, ± 0.1% of length |
| Testing speed | < 6 seconds typical |
| Connector | Removable/cleanable SC adapter, UPC polish |
| Fiber types tested | 9/125 µm singlemode |
| Reflectance threshold | -40 dB typical |
| APC open detection | -65 dB reflectance typical and backscatter > 3 dB above the noise floor |
| Detector type | InGaAs PIN photodiode used in incident detection |
| Safety | CSA C22.2 No. 61010.1.04, EN 61010-1:2001 {2nd Edition}, EN60825-1:2007 Class 1 Laser |
| EMC | EN 61326-1, EN61000-4-2, 3 80 MHz to 2.7 GHz @ 3V/m. Telephony Requirements: Class B Emissions |
For full Fluke Networks Fiber OneShot product specifications, please click here: Fluke Networks Fiber OneShot