Fluke Networks MicroMapper LAN Wiremap Checker
$89.95
Availability:
In stock
SKU
1H201
Condition: Refurbished
Warranty: 1 YEAR WARRANTY
Shipping: USA & Worldwide
- Fluke Networks MicroMapper Wiremap Checker (BC# 42601)
- Fluke Networks Remote
- (2) Ethernet Cables
- User Manual On CD-ROM
- Carrying Case (G)
Request a Quote for
Fluke Networks Wiremapper
The MICROMAPPER is a hand-held cable tester that enables network professionals to quickly and easily verify the integrity of Ethernet twisted pair cables. In one step, the MICROMAPPER will test twisted pair cabling for opens, shorts, reversed, crossed, and split pairs. Simply slide the switch to the Cable position, press the (TEST) button and the MICROMAPPER will automatically scan for any existing faults in your cable. The specially designed remote unit is provided for one-person testing of installed cabling. The tone generator function can be used with the MicroProbe cable tracer to trace cables and locate cables hidden in ceilings, walls, floors, and bundles.
Features:
Specifications:
The MICROMAPPER is a hand-held cable tester that enables network professionals to quickly and easily verify the integrity of Ethernet twisted pair cables. In one step, the MICROMAPPER will test twisted pair cabling for opens, shorts, reversed, crossed, and split pairs. Simply slide the switch to the Cable position, press the (TEST) button and the MICROMAPPER will automatically scan for any existing faults in your cable. The specially designed remote unit is provided for one-person testing of installed cabling. The tone generator function can be used with the MicroProbe cable tracer to trace cables and locate cables hidden in ceilings, walls, floors, and bundles.
Features:
- Tests for wiring faults and detects opens, shorts, crossed, reversed, and split pairs. (Split pair fault detection requires a minimum cable length of 15.75" (40cm))
- Verifies shield integrity
- MICROMAPPERﾒs Remote Identifier enables one person to test installed cabling
- Easy to read fault display and high speed testing
- Generation of two tones for tracing cables and locating hidden cables
- Debug-mode for detailed fault identification results
- Auto-sleep mode to decrease power consumption
Specifications:
| Connectors | |
| MICROMAPPER main unit: | RJ45 jack |
| Remote Identifier: | RJ 45 jack |
| Pairs tested | 1-2, 3-6, 4-5, 7-8, and shield |
| LED Display | |
| Horizontal: | 5 green LEDs for pairs and shield display (1 - 2, 3 - 6, 4 - 5, 7 - 8, and SHIELD) |
| Vertical: | 6 red LEDs (TONER, SHORT, REVERSED, MISWIRE, SPLIT PAIRS, and LOW BATTERY) |
| Cables test limit | |
| Minimum: | 15.75" (40cm); Maximum: 656ﾒ (200 m) |
| Power | |
| MICROMAPPER: | requires four 1.5 AAA batteries. IEC : LR03; Others : AAA, E92, 4003; JIS : AM 4 ; ANSI : 24A; 1.5 Volt (nominal) |
| Remote Identifier: | No battery required |
| Dimensions | |
| MICROMAPPER: | 4.92" x 2.05" x 1.54" 1 125 mm x 52 mm x 39 mm |
| Weight | |
| MICROMAPPER with Remote Identifier: | 125 g |
For full Fluke Networks MicroMapper product specifications, please click here: Fluke Networks MicroMapper