Fluke Networks NFK3-LAUNCH 130 Meter SM SC-SC Fiber Launch Cable
$395.00
Availability:
Out of stock
SKU
4P178
Condition: Refurbished
Warranty: 90 Day Exchange
Shipping: USA & Worldwide
Request a Quote for
- Fluke Networks NFK3-LAUNCH 130m 9/125 µm SM SC-SC Fiber Launch Cable (BC# 38218-L/T*)
Fluke Networks Fiber Launch Pack
About Launch and Receive Fibers
Launch and receive fibers let the tester measure the loss and reflectance of the first and last connectors in the cabling. If you do not use a receive fiber, you will not being measuring the last connector. Using a receive fiber over comes that problem. An alternative to using a receive fiber is to measure from both ends.
If you are required to do Bi-directional Averaging, you will need to use a receive fiber. If you are required to do Bi-directional Averaging, you will need to use a receive fiber.
Overall Loss and Length include the loss and length of the launch and receive fibers, unless launch compensation was enabled during the test.
Note:
Do not use hybrid patch cords to connect to the cabling under test. Connect the launch and receive fibers directly to the cabling under test, using a launch fiber with the appropriate connectors. This provides the best view of the connectors at the ends of the cabling. Hybrid launch fibers with various connector styles are available from Fluke Networks.
The receive fiber is the same as the launch lead. It is recommended to use 100 m for Multimode and 130 m for Singlemode for both launch and receive fibers.
About Launch and Receive Fibers
Launch and receive fibers let the tester measure the loss and reflectance of the first and last connectors in the cabling. If you do not use a receive fiber, you will not being measuring the last connector. Using a receive fiber over comes that problem. An alternative to using a receive fiber is to measure from both ends.
If you are required to do Bi-directional Averaging, you will need to use a receive fiber. If you are required to do Bi-directional Averaging, you will need to use a receive fiber.
Overall Loss and Length include the loss and length of the launch and receive fibers, unless launch compensation was enabled during the test.
Note:
Do not use hybrid patch cords to connect to the cabling under test. Connect the launch and receive fibers directly to the cabling under test, using a launch fiber with the appropriate connectors. This provides the best view of the connectors at the ends of the cabling. Hybrid launch fibers with various connector styles are available from Fluke Networks.
The receive fiber is the same as the launch lead. It is recommended to use 100 m for Multimode and 130 m for Singlemode for both launch and receive fibers.