Fluke Networks OPVXG-PTR OptiView XG Versiv Performance Test Remote
Condition: Refurbished
Warranty: 1 YEAR WARRANTY
Fluke Networks OptiView XG Test Remote
NEW OptiView XG Performance Test Remote – “Much Better”
The Performance Test Remote (PTR) instrument allows bi-directional testing (asymmetric, up to 4 separate, simultaneous streams) at up to full line-rate 10Gig on copper or fiber. Whether used at 1G or 10G rates, bi-directional testing is essential for assessing a network’s capacity for voice and video traffic. The Performance Test Remote provides a cost-effective way of instrumenting multiple points in the network with a 10G device for performance testing, network assessment, and validation of critical, high-performance links. The instrument comes with both copper (100/1000/10G) and fiber (1/10GBASESR, 850nm multimode SFP+) network interfaces. Alternatively, different SFP+ modules may be used for different standards/distances (LR, LRM.)
| Specifications | |
| Battery Type | Rechargeable Lithium Battery Pack |
| Temperature | |
| Operating (no battery installed) | -0° C to 50° C |
| Operating (lithium battery installed) | -0° C to 40° C |
| Charging | -40° C to 71° C |
| Stoarage | -40° C to 71° C |
OptiView XG – “Best”
A second OptiView XG provides the best performance overall as a test endpoint, with its capacity for eight bi-directional streams at up to 10 Gbps. When not used for performance testing, engineers at the remote site have the most powerful tool available for local wired and wireless troubleshooting, assessment, mapping and more.
Unmatched Network and Application Performance Analysis
OptiView XG is at home in the data center, with support for 10 GbE and virtualized servers; at the users' office supporting 802.11a/b/g/n/ac and application analysis; and with the switches and routers in between. Use it to find problems from your desk or take it with the data it collected to the trouble spot for first-hand analysis. Its unique troubleshooting system is based on proactive analysis, path analysis, and application-centric analysis, which provides expert guidance that automatically identifies the root cause of problems. No other tool combines powerful performance testing with in-depth troubleshooting and analysis!
More Flexible and Powerful than Other Testing Methods
Based on ITU-T Y.1564, the newest standard for testing real-world Ethernet performance, OptiView XG's NPT provides enhanced performance compared to older standards such as RFC2544, including:
- Faster—the LRPT option measures all key performance Service Level Criteria (SLC's)—availability, throughput, frame loss, delay, and delay variation (jitter)—in a single test instead of multiple independent tests.
- Fixed Test Times—a single lost frame during an RFC 2544 throughput test requires it be run again, so a test may take many times its set length. ITU-T Y.1564 tests only need to run one time for a complete measurement.
- More thorough—measures additional key Service Level Agreement (SLA) requirements including Excess Information and Excess Burst Rates (EIR/EBR), and availability. Measures delay and jitter on every frame in the test.
- More flexible—supports multiple simultaneous flows with independent destinations, SLAs and SLCs, CoS and VLAN settings.
| Measurement/Featrue | Basic Throughput Test | RFC 2544 | ITU Y.1554 (NPT) |
| Throughput | ✓ | ✓ | ✓ |
| Loss | ✓ | ✓ | ✓ |
| Latency | ✓ | ✓ | |
| Jitter | ✓ | ||
| Multiple Streams | ✓ | ||
| Class of Service Testing | ✓ | ||
| Excess Information Rate | ✓ | ||
| Excess Burst Rate | ✓ | ||
| Traffic Policing | ✓ | ||
| Network Test Specifications | |||
| Compatible Remote Devices |
OptiView XG (up to 10 Gbps FDX with independent upstream/downstream flows); LinkRunner AT 2000, LinkRunner CE, LinkRunner Pro or Duo with Reflector Option (up to 1Gbps FDX with symmetric upstream/downstream flows) | ||
| Test Configuration | Each test may be made up of an unlimited number of suites which run sequentially. Each suite may measure a maximum of eight bidirectional test flows from one to eight endpoint devices (peer or reflector). |
||
| Service Level Agreement (SLA) |
Committed Utilized Line Rate (ULR) Excess Utilized Line Rate Committed Information Rate (CIR) Excess Information Rate Committed Burst Size Excess Burst Size |
||
| Service Acceptance Criteria (SAC) |
Availability Latency (Frame Transfer Delay) Jitter (Frame Delay Variation) Frame Loss Ratio Separate values may be set for upstream and downstream flows when used with a peer endpoint (a second OptiView XG). The test may be configured to check for preservation of VLAN Priority and Class of Service markings. |
||
| Frame size | User-defined fixed frame size up to 10,018 bytes or a sequence of specific frame sizes. | ||
| Layer 2 Frame Settings | Destination MAC; VLAN ID number, priority, and tag protocol identifier | ||
| Layer 3 Frame Settings | TOS with DSCP or IP precedence; source IP address; UDP port number | ||
| Flow Options | The duration of the performance test may be set to one of the pre-defined values ranging 1 minute to 24 hours. Intermediate test results may be produced on an interval ranging from 1 minute to 60 minutes |
||
| Reported Results | Test results are compared to the user defined Service Acceptance Criteria with pass/fail status given with respect to these criteria. The user may set specific values for:Availability threshold (%), Latency threshold (msec), Jitter threshold (msec), and Frame Loss Ratio. |
||
Fluke Networks Versiv Mainframe
The TFS unit is a rugged, hand-held instrument that you configure to troubleshoot and document copper and fiber optic cabling. It includes these features:
- Operates with OptiFiber® Pro OTDR modules to locate, identify, and measure reflective and loss events in multimode and singlemode fibers.
- Operates with OneTouch™ AT Network Assistant module to test, troubleshoot, and document network performance.
- ProjeX™ management system lets you set up projects to specify the types of tests and the cable IDs necessary for a job and monitor the progress and status of the job.
- LinkWare™ software lets you upload test results to a PC and make professional-quality test reports.
Specifications:
| Operating temperature | 0 °F to 113 °F (-18 oC to +45 oC) |
| Storage temperature | -22 °F to +140 °F (-30 oC to +60 oC) |
| Operating relative humidity (% RH without condensation) | 0 % to 90 %, 32 °F to 95 °F (0 oC to 35 oC) 0 % to 70 %, 95 °F to 113 °F (35 oC to 45 oC) |
| Vibration | Random, 2 g, 5 Hz-500 Hz |
| Shock | 1 m drop test with and without module |
| Safety | CSA 22.2 No. 61010 IEC 61010-1 3rd Edition |
| Operating altitude | 13,123 ft (4,000 m) 10,500 ft (3,200 m) with ac adapter |
| Storage altitude | 39,370 ft (12,000 m) |
| Pollution degree | 2 |
| EMC | EN 61326-1 |
| Battery type | Lithium ion battery pack, 7.2 V |
| Battery life | 8 hr Auto OTDR operation, dual wavelength, no video probe connected, 150 m of fiber |
| Charge time | Tester off: 4 hours to charge from 10 % capacity to 90 % capacity. Tester on: 6 hours to charge from 10 % capacity to 90 % capacity with the tester on. |
| Display | 5.7 in LCD display with a projected capacitance touchscreen. |
| Main unit weight | 2 lb 4.5 oz (1.03 kg) |
Fluke Networks OPVXG-PTR OptiView XG Performance Test Remote
The Performance Test Remote (PTR) instrument allows bi-directional testing (asymmetric, up to 4 separate, simultaneous streams) at up to full line-rate 10Gig on copper or fiber.
The instrument comes with both copper (100/1000/10G) and fiber (1/10GBASESR, 850nm multimode SFP+) network interfaces.
Includes Carrying Case & Accessories As Listed
Fluke Networks OPVXG-PTR OPV XG OPVXG PTR OptiView XG Performance Test Remote Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 9053A-L/T* 9053B-L/T*
- Fluke Networks Versiv Mainframe (BC# 9053A-L/T*)
- Fluke Networks OptiView XG Module (BC# 9053B-L/T*)
- Cisco SFP-10G-SR Transceiver MM
- (2) Ethernet Cables
- SanDisk 8GB SD Card
- (2) MM LC-LC Fiber Optic Duplex Cables
- AC Adapter/Charger
- Power Cord
- USB PC Interface Cable
- User Manual On CD-ROM
- Carrying Case (G)