Fluke Networks Pro 3000 Analog Toner
$80.00
Availability:
In stock
SKU
6H59
Condition: Refurbished
Warranty: 90 Day Exchange
Shipping: USA & Worldwide
- Fluke Networks Pro 3000 Analog Toner w/ Case & Wrist Strap (BC# 16682M)
Request a Quote for
Fluke networks Pro 3000 tone Generator
Pro3000 Analog Tone Generator
Use the SmartTone capability of the Pro3000 Tone Generator to identify the right pair. When touching the wires together and momentarily shorting the far end of a cable pair, the SmartTone technology will change the cadence of the tone generated. This tone change you hear through the probe positively verifies the correct wire pair. SmartTone provides five distinct tones for exact pair identification.
Tone Generator features:
Specifications :
For full Fluke Networks Pro 3000 product specifications, please click here: Fluke Networks Pro 3000
Pro3000 Analog Tone Generator
Use the SmartTone capability of the Pro3000 Tone Generator to identify the right pair. When touching the wires together and momentarily shorting the far end of a cable pair, the SmartTone technology will change the cadence of the tone generated. This tone change you hear through the probe positively verifies the correct wire pair. SmartTone provides five distinct tones for exact pair identification.
Tone Generator features:
- SmartTone technology
- Send tone signal up to 10 miles on most cables
- Line cord features angled bed-of-nails clips and ruggedized RJ-11 plug for direct access to phone and data jacks without adapters
- External switch allows selection of solid or alternating tone options, indicated with solid or flashing LEDs
- Continuity testing
- Line polarity confirmation
Specifications :
| User interface | Slide switch selects Continuity or Tone Mode Push button switch selects SOLID, ALT or OFF Tone mode LED Continuity/Polarity LED |
| Solid Frequency | 1000 Hz nominal |
| Alternating Frequency | 1000/1500 Hz nominal |
| Over Voltage Protection | 60 Vdc in Toner/Polarity Mode |
| Output Power in Tone Mode | 8 dbm into 600 ohms |
| Output Voltage Level in Continuity Mode | 8 Vdc with fresh battery |
| Battery | 9V alkaline |
| Temperature | -20? C to 60? C, Storage: -40? C to 70? C |
| Case dimensions | 2.7 in. x 2.4 in. x 1.4 in. (6.9 cm x 6.1 cm x 3.6 cm) |
For full Fluke Networks Pro 3000 product specifications, please click here: Fluke Networks Pro 3000