Fluke PV350 0-500 PSI Pressure / Vacuum Transducer Module
Condition: Refurbished
Warranty: 1 YEAR WARRANTY
Fluke PV350 Pressure / Vacuum Transducer Module
The PV350 Pressure/Vacuum Transducer Module (the module) measures gauge pressure; the difference between atmospheric (barometric) pressure and the pressure (or vacuum) applied to the pressure port on the transducer. It then converts that measurement to 1 mV dc per unit. A module and a high-performance digital multimeter (DMM) with min/max function become a datalogger capable of measuring peak high and peak low.
Compatibility
The PV350 is compatible with industrial gases and liquids that are compatible with 316 stainless steel. To determine the compatibility of a liquid or gas, refer to the manufacturer's specifications. When making measurements on more than one type of pressure system, make sure the fluids or gases in those systems are compatible. If they are not, contamination or damage to the system being measured may result.
Specifications:
| Pressure | |
| Range | 0 psi to 500 psi: (0 kPa to 3447 kPa) |
| Accuracy | ±0.25 % of reading ±0.3 psi ±0.25 % of reading ±2.1 kPa) |
| Vacuum | |
| Range | 0 in-Hg to -29 in-Hg (0 cm-Hg to -76 cm-Hg) |
| Accuracy | ±0.25 % of reading ±0.5 in-Hg (±0.25 % of reading ±1.3 cm-Hg) |
| Temperature coefficient | Add 0.05 % of reading per °C for temperature ranges -10 °C to 18 °C and 28 °C to 55 °C |
| Output | 1 mV per unit (psi, kPa, cm-Hg or in-Hg) |
| Resolution | Determined by the resolution of the measuring device. |
| RFI Specification | Typically <1 % error from 80 to 200 MHz at 3 V/m. |
| EMC | International IEC 61326-1: Portable; IEC 61326-2-2; CISPR 11: Group 1, Class A Group 1: Equipment has intentionally generated and/or uses conductively-coupled radio frequency energy that is necessary for the internal function of the equipment itself. Class A: Equipment is suitable for use in all establishments other than domestic and those directly connected to a low-voltage power supply network that supplies buildings used for domestic purposes. Korea (KCC) Class A Equipment (Industrial Broadcasting & Communication Equipment) Class A: Equipment meets requirements for industrial electromagnetic wave equipment and the seller or user should take notice of it. This equipment is intended for use in business environments and not to be used in homes. USA (FCC) 47 CFR 15 subpart B. This product is considered an exempt device per clause 15.103 |
| Meter Input Impedance | ≥1 MΩ |
| Maximum working pressure | 500 psi |
| Burst Pressure | 1000 psi |
| Weight | 12 oz, (336 grams) |
| Battery | Standard 9 V Alkaline battery (NEDA #1604, IEC 6LR61) |
| Battery life | 300 hours (typical) |
| Electrical Cable | Black PVC, will withstand up to 105 °C |
| Cable Length | 8 ft |
| Pressure Port Connection | 1/4 in. NPT |
| Connector | Brass 1/4 in. male flare to 1/4 in. female pipe thread |
Fluke PV350 Pressure / Vacuum Transducer Module
Compatible with all Fluke and most popular DMMs
Pressure Range: 0 - 500 PSI
PV-350 PV 350
Fluke PV350 PV-350 Pressure Vacuum Module Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 42047-L/T*
- Fluke PV350 Pressure / Vacuum Transducer Module (BC# 42047-L/T*)