Fujikura 62S SM MM Core Alignment Fiber Fusion Splicer
Condition: Refurbished / Calibrated
Warranty: 1 Year Warranty
Shipping: USA & Worldwide
- Fujikura 62S Core Alignment Fiber Fusion Splicer (BC# -L/T*)
- High Precision Fiber Cleaver
- Battery Pack
- AC Adapter/Charger
- Power Cable
- USB Interface Cable
- Carrying Case
Fujikura 62S Fusion Splicer
The Fujikura 62S provides active core alignment splice loss performance while utilizing a conventional wind protector and tube heater design. An alternative to the fully automated core-alignment model 70S, the 62S includes an auto-start feature for both the splicing and tube heating process that minimizes the steps necessary to process splices. With a shrink time of 23 seconds with standard splice sleeves, the 62S ensures a high level of productivity. Incorporating the proven ruggedized features pioneered by Fujikura, durability is greatly enhanced by a mirrorless optical system and "severeimpact resistant" monitor. Battery capacity is 200 splices/shrinks. The transit case doubles as a built-in or mobile workstation and makes splicing easier than ever.
Features:
- 5,000 splices electrode life
- 23 second tube heating time with standard sleeves
- Fully ruggedized for shock, dust and moisture
- Li-ion battery with 200 splices/shrinks per charge
- 5 mm cleave length for splice on connector or small package needs
- Sheath clamp or fiber holder operation
- Multi-function transit case with integrated workstation
Specifications:
| Model | 62S Fusion Splicer |
| Applicable Fibers | Single-mode (G.652 and G.657), Multimode (G.651), DS (G.653), NZDS (G.655) |
| Cladding Diameter | 80 μm to 150 μm |
| Coating Diameter | 100 μm to 1,000 μm |
| Fiber Cleave Length | 5 to 16 mm |
| Typical Average Splice Loss | 0.02 dB with SM, 0.01 dB with MM, 0.04 dB with DS, 0.04 dB with NZDS, measured by cut-back method relevant to ITU-T standards |
| Splicing Time | ULTRA FAST mode — 6 seconds; SM FAST mode — 7 seconds; SM AUTO mode — 10 seconds with SM fiber |
| Arc Calibration Method | Automatic, real-time and by using results of previous splice when in AUTO mode, manual arc calibration function available |
| Splicing Modes | 100 preset and user programmable modes |
| Splice Loss Estimate | Based upon dual camera core axis alignment data |
| Storage of Splice Result | Last 10,000 results stored in the internal memory |
| Fiber Display | X or Y, or both X and Y simultaneously. Front or rear monitor display options with automated image orientation |
| Magnification | 320X for single X or Y view, or 200X for X and Y view |
| Viewing method | Dual cameras with 4.7 inch TFT color LCD monitor |
| Operating Condition | 0 to 5,000 m above sea level, 0 to 95%RH and -10 to 50°C respectively |
| Mechanical Proof Test | 1.96 to 2.25N |
| Tube Heater | Built-in tube heater with 30 heating modes; auto-start function |
| Tube Heating Time | Typical 23 seconds with FP-03 sleeve, 17 seconds with FP3 (40), 5-16 seconds with Fujikura micro sleeves, 15 seconds with slim 60 mm and 40 mm sleeves |
| Protection Sleeve Length | 60 mm, 40 mm, micro |
| Splice/Heat Cycles with Battery | Typical 200 cycles with power save functions activated |
| Electrode Life | 5,000 Arc Discharges |
| Power Supply | Auto voltage selection from 100 to 240 V AC or 10 to 15 V DC with ADC-18, 14.8 V DC with BTR-09 battery |
| Terminals | USB 1.1 (USB-B type) for PC communication. Mini-DIN (6-pin) for HJS-02/03 |
| Wind Protection | Maximum wind velocity of 15 m/s (34 mph) |
| Dimensions | 146 W x 159 D x 150 H (mm) / 5.75 W x 6.25 D x 5.9 H (inches) |
| Weight | 2.5 kg (5.5 lbs) with AC adapter ADC-18; 2.7 kg (5.95 lbs) with BTR-09 battery |