Fujikura 70R+ SM MM Ribbon Fiber Fusion Splicer
Condition: Refurbished / Calibrated
Warranty: 1 YEAR WARRANTY
Fujikura 70R+ Fusion Splicer
The Fujikura 70R+ ribbon splicer utilizes precision, fixed v-groove technology for splicing ribbon fiber up to 12 fibers, including single fibers. Incorporating the proven ruggedized features pioneered by Fujikura, the 70R+ has automated and enhanced user control features to increase splicing efficiency. A user programmable, automated wind protector expedites the splicing process by automatically closing to initiate the splice process, and opening upon splice completion. These automated features reduce the steps needed to execute a splice resulting in greater splicing efficiencies. An auto-start “clamshell design” tube heater applies heat to both sides of the splice protection sleeve resulting in a 40-second shrink time for 12-fiber ribbon. The result is a total splice process time of approximately 55 seconds! Ruggedness and durability are greatly enhanced by a mirror-less optical system and "severe-impact resistant" monitor. An innovative transit case doubles as a built-in or mobile workstation. In an industry first, the 70R+ is also equipped with Bluetooth® technology. This allows the splicer to actively communicate with Bluetooth enabled fiber preparation accessories making maintenance of fiber preparation tools easier than ever!
Features:
- Bluetooth wireless communication
- Automated and programmable wind protector
- 40-second automated tube heater
- Fully ruggedized for shock, dust and moisture
- Li-ion battery with 110 splices/shrinks per charge
- On-board training and support videos
- Multi-function transit case with integrated workstation
| Fujikura 70R+ Fusion Splicer Specifications | |
| Applicable Fibers | Single-mode (G.652 & G.657), Multimode (G.651), DS (G.653), NZDS (G.655) |
| Fiber Count | Single, 2, 4, 5, 6, 8, 10, 12 |
| Cladding Diameter | 125 µm |
| Coating Diameter | Ribbon: 0.25 mm to 0.4 mm, Single: 250 µm and 900 µm |
| Fiber Cleave Length | 10 mm |
| Typical Average Splice Loss | 0.05 dB with SM, 0.02 dB with MM, 0.08 dB with DS, 0.08 dB with NZDS; measured by cut-back method relevant to ITU-T standards |
| Splicing Time | Typical 15 seconds with standard single-mode fiber |
| Arc Calibration Method | Automatic, real-time by using results of previous splice when in AUTO mode; manual arc calibration function available |
| Splicing Modes | 100 preset and user programmable modes |
| Splice Loss Estimate | Based upon dual camera cladding alignment data |
| Storage of Splice Result | Last 2000 splice results stored in the internal memory |
| Fiber Display | X or Y, or both X and Y simultaneously; front or rear monitor display options with automatic image orientation |
| Magnification | 35X to 90X |
| Viewing Method | Dual cameras with 4.7 inch TFT color LCD monitor with anti-reflective coating |
| Operating Condition | 0 to 3,660 m above sea level, 0 to 95% RH, and -10 to 50°C respectively |
| Mechanical Proof Test | 1.96 to 2.25 N |
| Tube Heater | Built-in tube heater with 30 heating modes; auto-start function |
| Tube Heating Time | Typical 40 seconds with FP-5 sleeve, 17 seconds with FP3 (40), 5-15 seconds with Fujikura micro sleeves |
| Protection Sleeve Length | 60 mm, 40 mm, Micro |
| Splice/Heat Cycles with Battery | Typical 110 cycles with power save functions activated |
| Electrode Life | 1,500 Arc Discharges |
| Power Supply | Auto voltage selection from 100 to 240V AC or 10 to 15V DC with ADC-18, 14.8V DC with BTR-09 battery |
| Terminals | USB 2.0 (USB-B type) for PC communication and Mini-DIN (6-pin) for RS02/RS03 |
| Wind Protection | Maximum wind velocity of 15m/s (34 mph) |
| Dimensions | 146 W x 159 D x 150 H (mm) / 5.7 W x 6.3 D x 5.9 H (inches) |
| Weight | 2.3 kg (5.1 lbs) with AC adapter; 2.5 kg (5.5 lbs) with battery |
For full Fujikura 70R+ Ribbon Fusion Splicer product specifications, please click here: Fujikura 70R+
Fujikura 70R+ SM MM Ribbon Fiber Fusion Splicer
The Fujikura 70R+ ribbon splicer utilizes precision, fixed v-groove technology for splicing ribbon fiber up to 12 fibers, including single fibers
Includes 6 Month Fusion Splicer Care Kit (FS6MC)
- 4oz Flip Jar Of 99% Alcohol
- (50) Non-Lint Dry Wipes
- (6) Fiber Optic Wipes w/ 99% Alcohol
- 2oz Pump Fast Evaporating Mirror Spray
- (25) Camera Swabs
- (25) V-Groove Swabs
Includes Fujikura CT-30 High Precision Fiber Cleaver, Hard Carrying Case & Accessories As Listed
70R
Fujikura 70R Fujikura70R Fusion Splicer Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 37935-L/T*
- Fujikura 70R+ Ribbon Fiber Fusion Splicer (BC# 37935-L/T*)
- CT-30 Precision Fiber Cleaver w/ Case
- Fujikura RS03 Ribbon Stripper w/ DC Cable
- Clauss CFS-2 Fiber Stripper
- 6 Month Fusion Splicer Care Kit FS6MC:
- 4oz Flip Jar Of 99% Alcohol
- (50) Non-Lint Dry Wipes
- (6) Fiber Optic Wipes w/ 99% Alcohol
- 2oz Pump Fast Evaporating Mirror Spray
- (25) Camera Swabs
- (25) V-Groove Swabs
- Fujikura ADC-18 AC Adapter
- Fujikura BTR-09 Battery Pack
- DCC-18 Charge Cable
- Power Cable
- USB PC Interface Cable
- Sleeve Holder
- Screwdriver
- FH-50-12 Fiber Holder Set
- FH-50-250 Fiber Holder Set
- FH-50-900 Fiber Holder Set
- Fujikura 70R+ Quick Reference Guide
- Fujikura 70R+ User Manual CD-ROM
- Hard Carrying Case w/ Strap