GE Technologies DM5E Corrosion Thickness Gauge
Condition: Refurbished
Warranty: 1 YEAR WARRANTY
Shipping: USA & Worldwide
- GE Inspection Technologies DM5E Corrosion Thickness Gauge (BC# 32556-L/T*)
- GE DA501EN-500495 Thickness Probe
- GE N06159 Steel Bar
- USB PC Interface Cable
- Wrist Strap For Unit
- Hard Carrying Case
DM5E Corrosion Thickness Gauge
The DM5E incorporates all the features of the DM5E Basic but also offers the DUAL MULTI operating mode. This has been used in previous GE corrosion thickness gauges and has proved invaluable in measuring thickness of metal through coatings. There is no need to remove the coating at the measuring point, saving time and money.
All versions of the DM5E have the same user-friendly operator keypad interface. This has a central Mode key, a calibration/on/off key, two function arrow keys to activate and set functional control and four arrow keys for adjusting parameter values and for navigating through the intuitive single level menu. The keypad allows access to all calibration, set-up and measurement display modes of the instrument. With the DL version, a file display mode allows users to create and store thickness reading s in files. All calibration is menu-driven and the operator is guided through every step. There is a built-in calibration reminder, which can be set to remind the user to calibrate after a specified number of measurements or after a given time period.
Both the DM5E and the DM5E DL offer Dual Multi Measurement. Virtually all components and structures subjected to thickness measurement will have some kind of protective coating. Such coatings, including paint, contribute significant error to thickness measurements of underlying metal walls when using conventional methods. In addition, the removal of coatings, and their subsequent reapplication, involves considerable cost and time. With the field proven Dual Multi feature there is no need to remove any protective coating. It is only necessary to select Dual Multi mode, place the probe in position and take the measurement.
Specifications:
| Operating Principle | Ultrasonic, Pulse Echo Measurement Method | |
| Measuring Range | Depends on Probe and Material, 0.60 mm to 508 mm (0.025ﾔ to 20.00ﾔ) in IP to 1st BW Measurement Mode, 2.00 mm to 127.0 mm (0.079ﾔ to 5.00ﾔ) in Dual-Multi Measurement Mode, the Coating Thickness Range Shall be 0.3 mm to 2.50 mm (0ﾔ to 0.098ﾔ). |
|
| Measuring Resolution | 0.01 mm Default - Selectable 0.01, 0.1 mm (0.001ﾔ Default - Selectable 0.001, 0.01ﾔ | |
| Material Velocity Range | 0.508 to 18.699 mm/msec (0.0200 to 0.7362ﾔ/msec) | |
| Material Velocity Resolution | 1 m/s (0.0001ﾔ/msec) | |
| Units | Inch or Millimeter | |
| Calibration | One-Point Cal, On-Block and Off-Block, Two-Point Cal | |
| Pulser | Excitation Pulse | Spike Pulser |
| Voltage | 120 V into 50 ohm Load, Using 20 MHz Oscilloscope | |
| Receiver | Bandwidth | 500KHz to 12 MHz @ -3 dB |
| Gain | Automatic Gain Control | |
| Display Type | High-Resolution Graphical LCD, 64 x 128 Pixels, 53.0 mm x 27.0 mm with Backlight and Adjustable Contrast | |
| Update Rate | 4 Hz or 8 Hz, User Selectable, 24 Hz Scan Mode Capture Rate | |
| Thickness Display Rate | NORMAL View Mode | 5 Digit, 10.6 mm (0.4ﾔ) High |
| B-SCAN View Mode | 5 Digit, 2.55 mm (0.1ﾔ) High | |
| Display of Last Reading | Solid Filled or Hollow Digits Indicate Coupled or Uncoupled Condition | |
| Setups | 9 Standard Setups for Probes | |
| Alarm Settings | Minimum and Maximum Alarms, Range of 0.25 mm to 508 mm, 0. (0.010ﾔ to 20.00ﾔ) Reading Alternates Between Solid and Hollow When Alarms Are Enabled and Violated |
|
| Power Requirements | 2 ﾓAAﾔ Size Batteries | |
| Battery Life/Operating Time | Approximately 60 Hours | |
| Instrument Shut-off | Selectable ALWAYS ON or AUTO OFF After 5, 10, 15, 30 Minutes of Inactivity | |
| Language | Selectable English, German, French, Spanish, Italian, Russian, Japanese and Chinese | |
| I/O Connectors | Transducer | Dual Lemo 00 (coax) |
| Mini-USB | Mini-USB to PC | |
| Temperature | Operating | -10°C to +50°C (+10°F to +120°F) |
| Storage | -20°C to +60°C (-10°F to +140°F) | |
| Weight | 223 g (0.597 lb) Including Batteries | |
| Size | 138 mm x 32 mm x 75 mm | |
| Shock | IEC 68-2-27 Ea, as per Mil Std 810C Method 516.2 Procedure I with a 15g 11ms Impulse Half Sinusoidal Wave Applied 6 Times per Axis | |
| Sealing | IEC529 / IP54, Dust Proof/Dripping Water Proof as per IEC 529 Specifications for IP54 Classification |
For full GE DM5E product specifications, please click here: GE DM5E