GE DMS GO Ultrasonic Thickness Gauge
$6,319.00
Availability:
In stock
SKU
2K29
Condition: Refurbished / Calibrated
Warranty: 1 Year Warranty
Shipping: USA & Worldwide
- GE DMS GO Ultrasonic Thickness Gauge (BC# 39172-L/T*)
- AC Adapter/Charger
- Power Cord
- USB PC Interface Cable
- Wrist Strap For Unit
- User Manual On CD-ROM
- Hard Carrying Case (g)
Request a Quote for
GE DMS GO Ultrasonic Thickness Gauge
The DMS Go is a portable ultrasonic thickness gauge. In addition to its light-weight design, the DMS Go includes a clean and simple user interface and a large, easy-to-read color WVGA (800x480) display. The instrument provides ultrasonic flaw detection and thickness measurements., and can store scans, operating parameters, and reports.
Specifications:
| General Characteristics | |
| Size | 175 x 111 x 50 mm |
| Weight | 0.870 kg |
| Display Type | 800 x 480 pixels |
| Display Size | 108 x 64.8 mm |
| Display Update Rate | 60 Hz |
| Probe Connection | 2 “00” LEMO |
| Low Battery Warning | yes |
| Battery Operational Time | 8 Hours |
| Operational Voltage Range | 8.4 Volts |
| Operational Current Range | 1.2 ma |
| Operational Temperature Range | 0° - 50 °C |
| Transmitter | |
| PRF | 4/8/16/32 Hz |
| Receiver | |
| Gain Control | Automatic |
| Frequency ranges | Broad Band |
| Lower frequency ranges | 0.963 MHz |
| Upper frequency ranges | 22.605 MHz |
| Center frequency | 4.898 MHz |
| Dynamic range | > 105 |
| Performance | |
| Accuracy | 0 to 25.40 mm / 0 to 1.000 in |
| Resolution | 0.01mm or 0.1mm / 0.001inch or 0.01inch |
| Range of Velocity Setting | min: 1000 max: 9999 |
| Calibration Methods | 2 Point, Off Block Zeroing, Automatic On Block Zeroing |
| Type of Sockets | |
| Probe connection | Lemo 00 type |
| I/O interface | Molex 10-pin |
| USB | Mini-USB |
| Storage memory | Standard SD-Card |
| Data Storage | DR file save in Standard SD-Card |
| Data Output | Standard SD-Card |