Fujikura FSM-50R Fusion Splicer & CMA5000 OTDR
Condition: Refurbished / Calibrated
Warranty: 90 Day Exchange
Shipping: USA & Worldwide
- Fujikura FSM-50R12 Arc Fusion Splicer
- USFiber Optic USF-21 High Precision Fiber Cleaver w/ Hard Case
- Fujikura HJS-02 Hot Jacket Stripper w/ DC Power Cord
- Fujikura Single Fiber Holder Sets:
- FH-50-250
- FH-50-900
- Fujikura Ribbon Fiber Holder Sets:
- FH-50-4
- FH-50-12
- Clauss CFS-2 Fiber Optic Stripper
- (20 Fiber Protection Sleeves
- Protective Screen Cover
- Fujikura BTR-06 Battery Pack
- Fujikra ADC-11 AC Adapter/Battery Charger
- DCC-10 Battery Charger Cable
- Power Cord
- RS232 PC Interface Cable
- Fujikura FSM-50R Recorder Software
- User Manual On CD-ROM
- Hard Carrying Case
- Corning GN Nettest CMA5000 Mainframe
- Corning 5255-111-OTDR-1 Singlemode Module
- Source
- 1310nm
- 1550nm
- Interchangeable SC Connector
- Power Meter
- 850nm
- 1300nm
- 1310nm
- 1550nm
- 1625nm
- Interchangeable FC Connector
- VFL
- Source
- Corning 5266-000-OTDR-1 Multimode Module
- 850nm
- 1300nm
- Interchangeable ST Connector
- Corning 5255-111-OTDR-1 Singlemode Module
- Fiber Cables:
- (2) SM SC-FC
- (2) MM ST-ST
- AC Adapter/Charger
- Power Cord
- USB PC Interface Cable
- Ethernet Cable
- Key Board
- CMA5000 Traceview Software
- User Manual On CD-ROM
- Strap For Unit
- Hard Carrying Case
Fujikura FSM-50R12
Features:
- Suitable for ribbon fiber splicing
- Splicing up to 12-fiber ribbon
- Cladding alignment with fixed V-grooves
- Dual-directional operating system
- Arc calibration-free system
- Automatic fiber loading system
- Large capacity slot-in battery
- Simple operation steps
Specifications:
| Model | FSM-50R12: Mass fusion splicer up to 12-fiber |
| Applicable fibers | SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU -T G.653), NZDS (ITU-T G.655) |
| Fiber Count | Single, 2, 4, 5, 6, 8, 10 and 12 |
| Fiber cleaved length | 10mm |
| Actual average splice loss | 0.05dB with SM, 0.02dB with MM, 0.08dB with DS,
and 0.08dB with NZDS. Measured by cut-back method relevant to ITU-T and IEC standards. |
| Splicing time | Typical 20seconds |
| Return loss | >>60dB |
| Splicing modes | 40 user programmable modes and up to 60 modes for reference (factory predetermined setting). |
| Splice loss estimate | Available |
| Storage of splice result | The last 400 results to be stored in the internal memory. |
| Fiber display | X / Y, or both X and Y simultaneously. |
| Magnification | 35x |
| Viewing method | Two CMOS cameras and 5.6inch color LCD monitor. |
| Operating condition | 0 to 3,660m above sea level, 0 to 95%RH and -10 to 50ﾁﾎ respectively. |
| Mechanical proof test | 2N |
| Tube heater | Built-in tube heater with 10 heating modes and up to 20 modes for reference. |
| Tube heating time | Typical 40seconds with FP-04(T), 45seconds with FP-05 protection sleeves. |
| Applicable protection sleeve length | 60mm and 40mm |
| No.of splice/heating with battery | Typical 70 cycles with BTR-06(S) / Typical 140 cycles with BTR-06(L). |
| Power supply | Auto voltage selection from 100 to 240V AC or 10 to 15V DC with ADC-11, 13.2V DC with BTR-06(S)/(L). |
| Terminals | USB 1.1 (USB-B type) for PC communication. Video terminal RCA video jack / NTSC. |
| Wind protection | Max. wind velocity of 15m/s. |
| Dimensions | 150W ﾁ~150D ﾁ~150H (mm) |
| Weight | 2.2 kg (2.7kg including AC adapter ADC-11) |
CMA 5000 OTDR
The CMA5000 is one of the most modular and flexible field service offerings from Anritsu. Test Gigabit Ethernet, DWDM, SONET, OTDR, ORL, PMD and CD all with the same easy-to-use instrument
The CMA5000 is a field portable, network testing platform designed for
installation, maintenance and troubleshooting of next generation, convergence
networks. It features a common user interface, open architecture design and
numerous test technologies that allow the platform to evolve with user testing
needs and address ever-changing telecommunication
infrastructures.
Comprehensive physical layer characterization is
simplified with all required testing applications including OTDR, Optical
Spectrum Analysis, Loss Test Set and Optical Return Loss. Supplemental
tools such as a Visual Fault Locator and Video Inspection Probe are also
available providing a complete testing solution. As services are deployed, the
CMA5000 expands to certify performance of Gigabit Ethernet and SONET/SDH
networks up to 10Gb/s.
Why choose the CMA5000?
Common platform supports all the tools needed for:
- Fiber installation and maintenance
- Rapid isolation of network problems
- In-depth analysis and monitoring of network performance
It combines Best-in-Class performance with:
- Exceptional ease-of-use
-Accurate results with little or no training - Common feature set across different test applications
- Leads to greater productivity - One button tests that speed troubleshooting
- Faster time to restore service - Multi-layer test capability
- Quickly isolate and resolve complex network problems
CMA5000 provides significant advantages:
- The CMA5000 reduces the total cost of measurement
- Common platform reduces the number of ﾓboxesﾔ needed to perform routine and emergency testing
- Common user interfaces reduces training required for effective use of different applications - The CMA5000 provides increased customer revenue
- Simple bandwidth utilization monitoring leads to network optimization
- Fast, efficient testing enables rapid restoration of existing services and quicker deployment of new ones - Simple Go/NoGo tests are always backed up with detailed data for manual analysis
Even though the unit is simple for the novice, the experienced users can drill down to get more in-depth results
Todayﾒs telecommunication professionals are faced with unprecedented challenges ranging from accelerating the deployment of highspeed communications services to reducing costs, including capital expenditures. NetTest answers these challenges with the CMA 5000 Multi-Layer Network Test Platform.
The CMA 5000 is the industryﾒs premier test and measurement solution designed with the high performance and scalability necessary to meet the stringent demands of telecommunication professionals while simultaneously accelerating the deployment of new services and reducing the total cost of measurement.
Reduce the Total Cost of Measurement
One platform
providing complete testing solutions for multiple network layers saves time by
minimizing training, increasing user efficiency, reducing equipment inventory,
and decreasing test time via best-in-breed specifications - reducing the total
cost of measurement.
Accelerate the Deployment of Services
Unparalleled
performance for all applications allows networks to be characterized and
commissioned faster than the competition, thereby providing accelerated time to
revenue.
Optimize Performance and Bandwidth
The CMA 5000 fully
characterizes each fiber and network for maximum performance and revenue
generation.
Specifications:
| Model | Wavelength | Optical Fiber Type | Pulse width | Dynamic Range (SNR=1) | Deadzone (back-scattered) | Deadzone (Fresnel |
| 5255 | 1310ﾱ20 nm 1550ﾱ25 nm | Single Mode (8-10 um) | 5, 10, 20, 50, 100, 200, 500, 1000, 2000, 5000, 10000, 20000 ns | 37/36 dB | 9/9m | 4/3.5m |
| 5266 | 850ﾱ30 nm 1300ﾱ30 nm | Multimode(62.5 um) | 5, 20, 50, 100, 200,500, 1000 ns | 24/26 dB | 5/7m | 2.5/2.5m |
| Distance Range | Single mode: 5, 20, 50, 75, 125, 250, 300 km Multimode: 5, 15, 20, 40, 64 km |
| Sampling resolution | Single mode: 0.125, 0.5, 1, 2, 4, 8, 16 m Multimode: 0.125, 0.5, 1, 2, 4 m |
| Sampling Points | Up to 256,000 |
| IOR settings | 1.300000-1.700000 |
| Distance Measurement Accuracy | 0.0025% of distance measurementﾱ distance resolution ﾱ index uncertainty |
| Loss Measurement accuracy (linearity) | ﾱ0.04 dB/dB |
| Loss Resolution | 0.001 dB |
| Laser Safety | Meets IEC60825-1 Class I and CDRH Class 1 Requirements (Eye Safe) 21 CFR 1040 |
| Optical Connector | Single mode: Universal with UFC, USC, UST, AFC, ASC Multimode: Universal with FC, SC, ST |
| Operating Modes | Fault Locate, Standard OTDR, Construction (Automated Multi-wavelength, Multi-fiber testing), NetWorks (data processing and report generation) |