GreenLee 200EP-G Tone Probe w/ 77HP-G Tone Generator
$175.00
Availability:
In stock
SKU
PR02
Condition: Refurbished
Warranty: 90 Day Exchange
Shipping: USA & Worldwide
- GreenLee 200EP-G Tone Probe (BC# 9112A-L/T*)
- GreenLee 77HP-G Tone Generator (BC# 9112B-L/T*)
- Carrying Case
Request a Quote for
GreenLee 200EP-G Tone Probe
200B-G Tone Probe
with Adjustable Volume
200EP-G Tone Probe
with Adjustable Volume, Visual Signal Indicator, Headset Jack, Handset Connection Tab
The 200B-G and 200EP-G Tone Probes, when used in conjunction with any Greenlee tone generator, are designed to identify and trace wires or cables within a group without damaging the insulation.
Features:
Safety
Safety is essential in the use and maintenance of Greenlee tools and equipment. This instruction manual and any markings on the tool provide information for avoiding hazards and unsafe practices related to the use of this tool. Observe all of the safety information provided.
Specifications:
Greenlee 77HP-G Tone Generator
The 77M-G, 77HP-G, and 77HP-G/6A Tone Generators are intended to identify the conductor within a bundle, at a crossconnect point, or at the remote end. These testers are housed in high impact plastic cases, and each is powered by one 9 volt battery. Standard test leads include red and black rubber insulated test clips and a snag-proof, four-conductor modular cord and plug. (77HP-G/6A offers angled bed-of-nails clips.) A three-position toggle switch controls the modes of operation, and bi-colored Light Emitting Diodes (LEDs) display line polarity for Lines 1 and 2 (Line 1 only for 77M-G). When a short circuit is detected, an audible signal will be heard (77HP only). The tone and short circuit test functions are only applied to Line 1 using the modular plug.
A tone selector switch (Figure 3), located inside each unit and accessible from the outside using a slender tool, may be used to select a fast or slow warble tone output. The test sets are compatible with all common Central Office Switching Systems, and the output tone is isolated from DC voltages.
Safety
Safety is essential in the use and maintenance of Greenlee tools and equipment. This instruction manual and any markings on the tool provide information for avoiding hazards and unsafe practices related to the use of this tool. Observe all of the safety information provided.
specifications:
200B-G Tone Probe
with Adjustable Volume
200EP-G Tone Probe
with Adjustable Volume, Visual Signal Indicator, Headset Jack, Handset Connection Tab
The 200B-G and 200EP-G Tone Probes, when used in conjunction with any Greenlee tone generator, are designed to identify and trace wires or cables within a group without damaging the insulation.
Features:
- Resistive plastic carbon-fiber tip to prevent accidental shorts when probing wires
- Adjustable volume sensitivity control
- Battery compartment
- Recessed terminal ports for handset connection
- Spring-loaded ON/OFF/flashlight* button
- LED*
- High power flashlight*
- Headset jack (acoustically protected)*
Safety
Safety is essential in the use and maintenance of Greenlee tools and equipment. This instruction manual and any markings on the tool provide information for avoiding hazards and unsafe practices related to the use of this tool. Observe all of the safety information provided.
Specifications:
Electrical | |
Gain (nominal): | 30 dB |
Input Impedance (nominal): | 100 MΩ |
Probe Tip Resistance (min): | Metal Tip: 0 Ω Plastic Tip: 300 Ω |
Headset: | 3.5 mm stereo plug; 8 ohms minimum |
Battery: | One 9 VDC (NEDA 1604, JIS 006P, or IEC 6LR61) |
Battery Life (nominal): | 50 Hours |
Physical | |
Length: | 231 mm (9.0”) |
Width: | 55 mm (2.2”) |
Depth: | 28 mm (1.1”) |
Weight: | 145 g (5.2 oz) |
Operating/Storage Conditions | Temperature: 0 °C to 50 °C (32 °F to 122 °F) |
Greenlee 77HP-G Tone Generator
The 77M-G, 77HP-G, and 77HP-G/6A Tone Generators are intended to identify the conductor within a bundle, at a crossconnect point, or at the remote end. These testers are housed in high impact plastic cases, and each is powered by one 9 volt battery. Standard test leads include red and black rubber insulated test clips and a snag-proof, four-conductor modular cord and plug. (77HP-G/6A offers angled bed-of-nails clips.) A three-position toggle switch controls the modes of operation, and bi-colored Light Emitting Diodes (LEDs) display line polarity for Lines 1 and 2 (Line 1 only for 77M-G). When a short circuit is detected, an audible signal will be heard (77HP only). The tone and short circuit test functions are only applied to Line 1 using the modular plug.
A tone selector switch (Figure 3), located inside each unit and accessible from the outside using a slender tool, may be used to select a fast or slow warble tone output. The test sets are compatible with all common Central Office Switching Systems, and the output tone is isolated from DC voltages.
Safety
Safety is essential in the use and maintenance of Greenlee tools and equipment. This instruction manual and any markings on the tool provide information for avoiding hazards and unsafe practices related to the use of this tool. Observe all of the safety information provided.
specifications:
Electrical | |
Talk Battery (into 600 Ω): | 4.6 VDC |
Output Power (into 600 Ω): | +10 dBm |
Resistive Short Visual Indication: | <10 kΩ |
Resistive Short Audio Indication (77HP-G and 77HP-G/6A only): | <200 Ω |
Output Frequency (nominal): | Tone: Alternating 890/960 Hz Warble Rate: Slow: 1.3 Hz Fast: 6 Hz |
Voltage Protection (into a 600 Ω circuit): | 52 VDC |
Battery: | 9 VDC (NEDA 1604, JIS 006P or IEC 6LR61) |
Battery Life: | 50 hours |
Physical | |
Length: | 32 mm (1.25”) |
Width: | 64 mm (2.5”) |
Height: | 57 mm (2.25”) |
Weight (max): | 128 g (4.5 oz) |
Operating/Storage Conditions | |
Operating Temperature: | 0 °C to 50 °C (32 °F to 122 °F) |
Storage temperature: | -50 °C to 75 °C (-58 °F to 167 °F) |