Hioki 3169 Clamp On HiTest Power Quality Analyzer
$2,699.00
Availability:
In stock
SKU
PQ16
Condition: Refurbished / Calibrated
Warranty: 1 YEAR WARRANTY
Shipping: USA & Worldwide
- Hioki 3169-20 Clamp On Power HiTester (BC# 29373-L/T*)
- (4) Hioki 9661 Clamp-On Sensors
- (4) Hoioki Test Leads
- Hioki 32MB Flash Card w/ Adapter
- Power Cord
- User Manual On Cd-ROM
- Carrying Case (G)
Request a Quote for
Hioki Clamp On 3169-20 Power Tester
CLAMP ON POWER HiTESTERs are 3169-20 and 3169-21 that allow measurement of single-phase to three-phase 4-wire circuits with a single unit. In addition to measuring standard parameters such as voltage, current, power, power factor, and integrated values, these clamp-on power meters can simultaneously perform demand measurements required for carrying out power management and energy-saving measures, as well as harmonic measurements. The two new power meters also feature PC card data storage, and come equipped with an RS-232C interface for PC communications. Further, with greater data processing speeds, it is possible to measure the power of just a few cycles, enabling more detailed and effective energy-saving measures for equipment. The 3169-20 and 3169-21 are ideal for users who want to achieve close control over energy-saving management activities and measures.
Features:
- Measure power lines of up to four systems (with a common voltage)
- A wide range of measurement functions
- Equipped with ranges from 0.5 A to 5000 A
- Supports high-speed data storage from individual waveforms
- PC Card compatible plus internal hard drive for extra memory
- Housed in a compact A5 body size
- Multi-language Compatibility
- Detect incorrect connection using vector diagrams
- Polarity display and measurement using the reactive power measurement method
- High-speed D/A output
- Ideal for power and harmonics management
Range Configuration Table:
| CLAMP ON SENSOR 9661 (5A, 10A, 50A, 100A, 500A) |
Connection | 5.0000A | 10.000A | 50.000A | 100.00A | 500.00A |
150.00V |
Single-phase 2-wire | 750.00 W | 1.5000kW | 7.5000kW | 15.000kW | 75.000kW |
| Single-phase 3-wire | 1.5000kW |
3.0000kW |
15.000kW |
30.000kW |
150.00kW |
|
| Three-phase 3-wire | ||||||
| Three-phase 4-wire | 2.2500kW | 4.5000kW | 22.500kW | 45.000kW | 225.00kW | |
300.00V |
Single-phase 2-wire | 1.5000kW | 3.0000kW | 15.000kW | 30.000kW | 150.00kW |
| Single-phase 3-wire | 3.0000kW |
6.0000kW |
30.000kW |
60.000kW |
300.00kW |
|
| Three-phase 3-wire | ||||||
| Three-phase 4-wire | 4.5000kW | 9.0000kW | 45.000kW | 90.000kW | 450.00kW | |
600.00V |
Single-phase 2-wire | 3.0000kW | 6.0000kW | 30.000kW | 60.000kW | 300.00kW |
| Single-phase 3-wire | 6.0000kW |
12.000kW |
60.000kW |
120.00kW |
600.00kW |
|
| Three-phase 3-wire | ||||||
| Three-phase 4-wire | 9.0000kW | 18.000kW | 90.000kW | 180.00kW | 900.00kW |
| FLEXIBLE CLAMP ON SENSOR 9667 | Connection | 500.00 A | 5.0000kA |
150.00V |
Single-phase 2-wire | 75.000kW | 750.00kW |
| Single-phase 3-wire | 150.00kW |
1.5000MW |
|
| Three-phase 3-wire | |||
| Three-phase 4-wire | 225.00kW | 2.2500MW | |
300.00V |
Single-phase 2-wire | 150.00kW | 1.5000MW |
| Single-phase 3-wire | 300.00kW |
3.0000MW |
|
| Three-phase 3-wire | |||
| Three-phase 4-wire | 450.00kW | 4.5000MW | |
600.00V |
Single-phase 2-wire | 300.00kW | 3.0000MW |
| Single-phase 3-wire | 600.00kW |
6.0000MW |
|
| Three-phase 3-wire | |||
| Three-phase 4-wire | 900.00kW | 9.0000MW |
Specifications:
| Basic Specifications: | |
| Measurement line type | Single-phase 2-wire, single-phase 3-wire, three-phase 3-wire, and three-phase 4-wire systems (50/60 Hz) |
| Number of systems that can be measured (for systems that share the same voltage) | Single-phase: 1P2W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 systems 1P3W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 systems Three-phase: 3P3W2M (measures the voltage and current for two lines) . . . . . . 2 systems 3P3W3M (measures the voltage and current for all three lines) . . . 1 system 3P4W (measures the voltage and current for three lines) . . . . . . . . 1 system 3P4W4I . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 system |
| Item | Voltage, current, active power, reactive power, apparent power, power factor, integrated value, frequency, harmonics |
| Measurement range | For the voltage, current, and active power ranges, see the range configuration tables |
| Measurement method | : Simultaneous digital sampling of voltage and current, PLL synchronization or a fixed clock (50/60 Hz) |
| Input methods | Voltage: Isolated input Current: Isolated input using a clamp-on sensor |
| Effective measurement area | Within 5 to 110% of the range |
| Total display area | Voltage and current: Within 0.4 to 130% of the range (zero is suppressed for less than 0.4%) Power: Within 0 to 130% of the range (zero is suppressed when the voltage or current is zero) Harmonic level: Within 0 to 130% of the range |
| Display | 5.7-inch LCD (320 × 240 dots), with backlight |
| Range switching method | Manual (the current range can be set for each system) |
| Display update rate | Approx. every 0.5 seconds (except when using a PC card while accessing the internal memory, or when performing RS-232C communications) |
| Input resistance (50/60 Hz) | Voltage: 2.0 M? ± 10% (differential input) Current: 200 k? ± 10% |
| Maximum input | Voltage input: 780 Vrms AC, peak value: 1103 V Current input: 1.7 Vrms AC, peak value: 2.4 V |
| Maximum rated voltage to earth | Voltage input terminals: 600 Vrms AC (50/60 Hz) |
| Crest factor | Voltage: Less than 2 (for full-scale input) Current: Less than 4 (for full-scale input. However, less than 2 for the 500 A, 1 kA, and 5 kA ranges) |
| Internal memory capacity | 1MB |
| Display Specifications | |
| Instantaneous value display | Voltage, current, active power, reactive power, apparent power, power factor, frequency, average voltage, average current, (average values are for each system) |
| Average value display | Voltage, current, active power, reactive power, apparent power, power factor, frequency, average voltage, average current |
| Maximum/minimum value display |
Voltage, current, active power, reactive power, apparent power, power factor, frequency |
| Integrate display | Integrated value Active power (consumption/regeneration) Reactive power (lag/lead) |
| Demand volume display (Integrated value within the specified interval) |
Integrated value Active power volume (consumption/regeneration) Reactive power volume (lag/lead) |
| Demand value display (average value within the specified interval) |
Active power (consumption), reactive power (lag), power factor |
| Maximum demand value display (average value within the maximum specified interval) |
The maximum demand value since the beginning of time series measurement and the time and date it occurred. |
| Harmonics list | List of the items measured for the specified harmonic (numerical value). |
| Harmonics graph | Bar graph or vector diagram of the items measured for the specified harmonic |
| Waveform display | Voltage and current waveforms (with a magnification update function) |
| Measurement value enlargement display |
Select and enlarge up to 5 items from the instantaneous value display. |
| Measurement Specifications | |
| Measurement method | True RMS method |
| Measurement display | Measurement of three voltage lines and 3 or 4 current lines is possible when using three-phase 3-wire and three-phase 4-wire systems |
| Measurement display | For three-phase 3-wire (the 3P3W3M setting), refer to the display for phase power values. |
| Polarity display | For consumption: no symbol, for regeneration: "-" |
| [Reactive power measurement] Using the reactive |
ON: Measures the reactive power directly using the reactive power measurement method OFF: Calculates the reactive power from the measurement values for voltage, current, and active power |
| Polarity display | For lag phase (LAG : current is slower than voltage): no symbol For lead phase (LEAD: current is faster than voltage) : "-" (Reactive power measurement method "ON") |
| [Apparent power measurement] Polarity display |
No polarity |
| [Power factor measurement] Measurement range |
1.0000 (lead) to 0.0000 to +1.0000 (lag) For lag phase (LAG: current is slower than voltage) :no symbol For lead phase (LEAD: current is faster than voltage) : "-" |
| Measurement range | 40.000 to 70.000 Hz |
| Input area for guaranteed accuracy | Within 10 to 110% of the range (for sine wave input) |
| Measurement source | Voltage U1 |
| Measurement range | 40.000 to 70.000 Hz |
| Input area for guaranteed accuracy | Within 10 to 110% of the range (for sine wave input) |
| Measurement source | Voltage U1 |
| [Integrated measurement] Measurement range |
Active power : 0.00000 mWh to 99999.9 GWh consumption -0.00000 mWh to -99999.9 GWh regeneration Reactive power : 0.00000 mvarh to 99999.9 Gvarh lag -0.00000 mvarh to -99999.9 Gvarh lead |
| Measurement display | Active power : Displays consumption and regeneration separately Reactive power : Displays lag and lead separately |
| [Harmonic measurement] Measurement range |
Basic wave frequency: 45 to 66 Hz PLL synchronization |
| Order for analysis | Up to the 40th order |
| Window width | A single cycle (number of data points analyzed: 128 points) |
| Window type | Rectangular |
| Analysis rate | 1/16 cycles |
| Item for analysis | Harmonic level: The voltage, current, or power level for each harmonic order : Harmonic content percentage: The voltage, current, or power content percentage for each harmonic order : Harmonic phase angle: The voltage, current, or power phase angle for each harmonic order : Total value: The total value for voltage, current, or power up to the 40th harmo |
| Setting Specifications | |
| Measurement line settings | 1P2W, 1P3W, 3P3W2M, 3P3W3M, 3P4W, 3P4W4I |
| Clamp-on sensor settings | 9694, 9660, 9661, 9667, 9669, 9695-02 and 9695-03 (* A different sensor can be set for each system.) |
| VT (PT) and CT ratio settings | 0.01 to 9999.99 (* A different CT ratio can be set for each system.) |
| Measurement start method | Manual or time (year, month, day, hour, minute) |
| Measurement stop method | Manual, time, or timer (1 seconds to 8784 hours) |
| Output Interval | Standard or fast (*Maximum measurement period: 1 year) Standard interval: 1, 2, 5, 10, 15, or 30 seconds, or 1, 2, 5, 10, 15, 30, or 60 minutes Fast interval: A single waveform, or 0.1, 0.2, or 0.5 seconds |
| Data output destination | PC card, internal memory, or printer |
| File name | Automatically attached, or set the desired name (up to 8 alphanumeric characters) |
| Display averaging circuit | OFF, 2, 5, 10, 20 times (for movement averaging) |
| Screen copy destination | PC card, internal memory, or printer |
| Display language settings | Japanese, English, German, French, Italian, Chinese (Simple, Trad), Spanish , Korean |
| Other settings | Reactive power measurement method selection, harmonic distortion selection, order display selection, backlight settings, ID settings, clock settings, etc. |
| Copy file | Copies files from the internal memory to the PC card |
| Load/Save selected file | Loads/Saves the file(s) selected from the internal memory or PC card |
| Delete file | Deletes the file(s) from the PC card |
| Format | Initializes the PC card or internal memory. |
| Storage format | Measurement data: CSV format (binary format when using the fast interval setting) Waveform data: Binary format Screen data: BMP format Settings data: CSV format |
| Instantaneous values | Voltage, current, active power, reactive power, apparent power, power factor, frequency, average voltage, average current, (average values are for each system) |
| Average value | Voltage, current, active power, reactive power, apparent power, power factor, frequency, average voltage, average current, (average values are for each system) |
| Maximum/minimum value | Voltage, current, active power, reactive power, apparent power, power factor, frequency |
| Integrated value | Active power (consumption/regeneration) Reactive power (lag/lead) |
| Demand value | Active power (consumption), reactive power (lag), power factor |
| Maximum demand value | The maximum demand value since the beginning of time series measurement and the time and date it occurred. |
| Harmonic | : Each harmonic order (level, content percentage, and phase angle), total value, instantaneous value for THD-F/THD-R : Each harmonic order (level, content percentage, and phase angle), total value, average value for THD-F/THD-R for each interval : Each harmonic order (level, content percentage, and phase angle), total value, maximum/minimum value for THD-F/THD-R within each interval |
| Waveform | Waveform (Voltage or current) |
| Status information | Exceeds the voltage/current crest factor, PLL unlock, power failure, exceeds the display limit |
| Numerical values | Prints the data selected as the data output item (during time series measurement). |
| Waveform | Hard copy of the screen (printing of each interval not available) |
| General Specifications | |
| Operating environment | Indoors, up to 2000m(78.74ft) ASL |
| Operating temperature and humidity | 0 to 40°C, 80% RH or less (non-condensating) |
| Storage temperature and humidity | -10 to 50°C, 80% RH or less (non-condensating) |
| Withstand voltage (50/60 Hz for 15 sec.) | 5.55 kVrms AC: Between the voltage input terminal and the 3169 casing 3.32 kVrms AC: Between the voltage input terminal and the current input terminal/external interface terminal 2.3 kVrms AC: Between the power supply and the 3169 casing 1.39 kVrms AC: Between the power supply and the current input terminal/external interface terminal |
| Power supply voltage rating | 100 to 240 V AC, 50/60 Hz |
| Maximum rated power | 30 VA |
| Dimensions and weight | Approx.210(8.27?)W × 160(6.30?) H × 60D(2.36?) mm (excluding protrusions), Approx.1.2 kg(42.3oz.) (3169-20, 3169-21) |
| Conforming standards | Safety EN61010 Pollution degree 2, measurement category ? (anticipated transient overvoltage 6000V) : EMC EN61326 EN61000 - 3 - 2, EN61000 - 3 - 3 |
For full Hioki 3169 product specifications, please click here: Hioki 3169