Huntron Tracker 2000A Electronic Component Tester Circuit Analyzer

Huntron Tracker 2000 General Purpose Troubleshooting


Test components and boards without power
- ideal for catastrophic failures

Get a picture of a component’s overall health
- including intermittent problems

Test gate
-fired devices with a built-in pulse generator Non-destructive testing


The advantage of Tracker technology
The Huntron® Tracker 2000 provides advanced troubleshooting capabilities to simplify testing newer technology components such as CMOS and MOS circuits. Its built-in pulse generator lets you thoroughly troubleshoot gate-fired devices such as SCRs, TRIACs and optocouplers. By energizing the gate, you can test a component in an active mode.

You use a Tracker 2000 while the power to the circuitry you’re testing is turned off. So you avoid an accidental short that could cause further damage. It allows you to analyze the overall health of a solid-state component, which makes it perfect for finding leakage or substrate damage that has brought a system or PCB down prematurely. Because it can compare suspect components to known-good equivalents, it’s also ideal for troubleshooting when documentation is missing or incomplete.

Real-world troubleshooting challenges
The Huntron Tracker 2000 is ideal for troubleshooting Programmable Logic Controls (PLCs). In troubleshooting multi-channel input modules, technicians frequently run into a damaged channel because the IC buffers, optocouplers and drivers have been overstressed. By using the pulse generator built into the Tracker 2000, you can quickly troubleshoot optocouplers and other gate-fired devices. Simply compare signatures of one channel against another. You’ll usually find problems where you see differences in signatures. Likewise, you can compare multichannel outputs with the Tracker 2000. These devices usually fail when too much current is drawn through the logic section. To troubleshoot them, compare the signatures of ICs in one channel against those in another, looking for differences that indicate a problem.

Analog signature analysis
The Tracker works by applying a current-limited AC signal across two points of a component. The current flow causes a vertical deflection of the CRT trace, while the voltage causes a horizontal deflection. Together, they give you a unique current-voltage “analog signature” that represents the overall health of the device you’re testing. Analyzing each signature, you can quickly tell if a component is good, bad or marginal.

For full Huntron Tracker 2000A product specifications, please click here: Tracker 2000A

Huntron Tracker 2000A Electronic Component Tester Circuit Analyzer

The Huntron® Tracker 2000 provides advanced troubleshooting capabilities to simplify testing newer technology components such as CMOS and MOS circuits. Its built-in pulse generator lets you thoroughly troubleshoot gate-fired devices such as SCRs, TRIACs and optocouplers. By energizing the gate, you can test a component in an active mode.

Includes Accessories As Listed

Huntron Tracker 2000A Tracker-2000 Circuit Diagnostic System Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

BC# 42263-L/T*

• Huntron Tracker 2000A Circuit Analyzer (BC# 42263-L/T*)
• Power Cord

Having trouble viewing this file? Click this link to download