IDEAL 0012-00-0336 FiberTEK MM Fiber Adapter
Condition: Refurbished
Warranty: 1 YEAR WARRANTY
Shipping: USA & Worldwide
- IDEAL 850 MM Fiber Adapter P/N: 0012-00-0336 (BC# 28301-L/T*)
- MM ST-ST Fiber Cable
IDEAL 0012-00-0336 MM FIBERTEK Adapter
The FIBERTEK fiber accessory for the LANTEK 6 and 7 is the perfect solution for certifying or troubleshooting fiber backbones and fiber to the desktop installations in single building and campus environments. FIBERTEK measures signal loss, length, and delay over Multimode and Singlemode fiber. In addition dual wavelength, bi-directional testing is enabled by having both a transmitter and receiver in each adapter.
FIBERTEK is available in two basic kits one each for Multimode and Singlemode. The Multimode kit contains two adapters, a 850 nm VCSEL light source and receiver to allow certification of fiber intended to host Gigabit Ethernet and a 1300 nm Fabry Perot laser source with receiver. The Singlemode kit also contains two adapters, a 1310 nm Fabry Perot laser with receiver and a 1550 nm Fabry Perot laser source with receiver.
Using only one of the FIBERTEK adapters, in the display unit, length and delay can be measured in loop-back mode.
Using both the display and remote units enables signal loss, dual wavelength, and bi-directional measurements.
Two methods are available for computing loss budget. The installer can input the type of fiber under test and the number of connectors and splices and have the loss budget automatically calculated. Or the user can input the loss value for each connector and splice to explicitly determine the loss budget.
FIBERTEK adapters fit entirely into the display and remote units and lock into place. There are no bulky adapters extending from the end of the units, creating a product that is easy to handle and producing accurate and repeatable results.
FIBERTEK supports network specific certification tests including 1000Base-LX and 1000Base-SX for Gigabit Ethernet. This allows the installer to easily certify fiber for the most common network types. All fiber tests are stored in the same way as copper tests and can be uploaded to a PC running LANTEK Reporter to create reports.
Features:
- Measures signal loss, length, and delay over Multimode and Singlemode fiber
- 850 nm VCSEL light source enables Gigabit Ethernet certification on Multimode fiber
- Enables bi-directional, dual wavelength measurements for both Multimode and Singlemode fiber
- Network specific autotests available for the most popular network types
- Talkset capability for both Multimode and Singlemode fiber available for enhanced communications
Specifications:
| Detector | |
| Receive Wavelengths: | MM: 850nm |
| Measurement Accuracy: | y: ±0.03 - 0.05 dB @ -20dBm |
| Dynamic Range: | MM: -53 dBm |
| Fiber Type | 9.0/50/62.5/125 micron |
| Detector Type: | INGaAs |
| Transmitters | |
| Power Output: | 850 (MM): -3 dBm into MM Fiber |
| Source Type: | 850 (MM): VCSEL Lase |
| Filtering Type | Kalman |
| Signal Loss | |
| Signal Loss Dynamic Range (MM) | 0 to -35 dB at Specified Accuracy |
| Propagation Delay | |
| Accuracy | ±4% or ±0.3 m (the greater of) |
| Resolution | ±0.5 m |
| Distance Range | 850 (MM) to 2 km |
| Network Specifications | 1000BASESX/LX (Gigabit Ethernet) ATM-155, ATM-622 Legacy Networks 100BASE-F 10BASE-FL, 10BASE-FL/FB, |
For full Ideal 0012-00-0336 product specifications, please click here: Ideal 0012-00-0336