IDEAL SignalTEK FO Copper Fiber Cable Network Qualification Tester
$1,895.00
Availability:
Out of stock
SKU
5R01
Condition: Refurbished / Calibrated
Warranty: 1 YEAR WARRANTY
Shipping: USA & Worldwide
Request a Quote for
- IDEAL SignalTEK FO Cable & Network Qualification Tester (BC# 6814A-L/T*)
- IDEAL SignalTEK FO Remote (BC# 6814B-L/T*)
- Finisar FTLF1319P1BTL Transceiver -1310nm
- Avago AFBR-57M5APZ Transceiver -850nm
- (2) Ethernet Cable
- SM LC-LC Duplex Fiber Cable
- MM LC-LC Duplex Fiber Cable
- User Manual On CD-ROM
- Carrying Case w/ Strap
IDEAL SignalTek FO Multimedia Qualification Tester
The World’s First Fiber and Copper Qualifier
SIGNALTEK-FO is the first Qualification tester that offers both copper and fiber optic testing; and SIGNALTEK-FO does it for less than the price of an Optical Test Set alone.
SIGNALTEK™-FO Capabilities beyond the typical Qualifier
SIGNALTEK-FO offers all of the existing capabilities of the standard SIGNALTEK Qualifier such as Gigabit Ethernet Qualification, test storage and reporting, and active link testing and adds the powerful capability of fiber optic Qualification.
Traditional power meter/light source kits only measure the attenuation of fiber optic links. As Gigabit Ethernet is becoming the standard for backbone and zone fiber optic cabling, attenuation tests alone may not be enough to guarantee error-free performance.
SIGNALTEK-FO’s Bit Error Rate testing, adds assurance that fiber optic links can actually support high-speed data in accordance with IEEE 802.3ab standards.
In addition to cable performance qualification, SIGNALTEK™ can be configured to run for several minutes or hours at a time. While stress testing critical network links, SIGNALTEK™ transmits hundreds of Gigabits of information across the network while looking for dropped packets. This monitoring mode allows SIGNALTEK™ to be used to isolate intermittent network problems that are difficult to detect. Adopting the latest generation of Gigabit Ethernet technology, IDEAL’s innovation brings the best performance to this new class of affordable testers.
Features:
For full Ideal Signaltek FO product specifications, please click here: Ideal Signaltek FO
The World’s First Fiber and Copper Qualifier
SIGNALTEK-FO is the first Qualification tester that offers both copper and fiber optic testing; and SIGNALTEK-FO does it for less than the price of an Optical Test Set alone.
SIGNALTEK™-FO Capabilities beyond the typical Qualifier
SIGNALTEK-FO offers all of the existing capabilities of the standard SIGNALTEK Qualifier such as Gigabit Ethernet Qualification, test storage and reporting, and active link testing and adds the powerful capability of fiber optic Qualification.
Traditional power meter/light source kits only measure the attenuation of fiber optic links. As Gigabit Ethernet is becoming the standard for backbone and zone fiber optic cabling, attenuation tests alone may not be enough to guarantee error-free performance.
SIGNALTEK-FO’s Bit Error Rate testing, adds assurance that fiber optic links can actually support high-speed data in accordance with IEEE 802.3ab standards.
In addition to cable performance qualification, SIGNALTEK™ can be configured to run for several minutes or hours at a time. While stress testing critical network links, SIGNALTEK™ transmits hundreds of Gigabits of information across the network while looking for dropped packets. This monitoring mode allows SIGNALTEK™ to be used to isolate intermittent network problems that are difficult to detect. Adopting the latest generation of Gigabit Ethernet technology, IDEAL’s innovation brings the best performance to this new class of affordable testers.
Features:
- Fiber Optic and Copper Gigabit Qualification
- Qualify copper and fiber-optic cabling to IEEE 802.3 standards
- Multimedia Gigabit Qualification (Multimode and Single Mode capability)
- Qualify short and long range cabling to a distance of up to 10km/
- BERT and Optical Attenuation Measurements
- Perform Bit Error Rate Testing and decibel (dB) loss measurements of optical links.
- Dual Wavelength Capability
- available in both 850nm and 1300mn wavelengths to support virtually all LAN and campus fiber applications.
- Small Form factor Pluggable (SFP) modules
- are compact, light-weight and field changeable.
- Storage and Reporting for Thousands of Reports
- Store and print Qualification reports for copper and fiber jobs using internal memory or USB “thumb-drives”.
| Ports/Connections | USB A/B, DC power input Shielded RJ-45 Port :Supports 10/100/1000Mbps Ethernet connections Small Form-factor Pluggable (SFP): Supports SFP modules sourced through IDEAL Industries in 850nm and 1300nm wavelengths, 1000Mbps Ethernet |
| Length Measurement | RJ-45 Port: TDR length measurement of 1-4 pair cables to 140m/460ft SFP Port: No length measurement of fiber optic cables |
| Bert Error Rate Measurements | Copper: 10/100/1000Mbps. Error rates tested to IEEE 802.3ab standard Fiber: 1000Mbps. Error rates tested to IEEE 802.3ab standard. |
| Battery Life: Standard AA Alkaline Batteries | Copper Testing: Approx 15 hours @ 22 tests per hour (45s Autotest) Fiber Testing: Recommend use of AC adapters when testing fiber |
For full Ideal Signaltek FO product specifications, please click here: Ideal Signaltek FO