JDSU SmartClass T1 Network Service Tester
$895.00
Availability:
In stock
SKU
2A09
Condition: Refurbished / Calibrated
Warranty: 1 YEAR WARRANTY
Shipping: USA & Worldwide
- JDSU SmartClass T1 Network Service Tester (BC# 29319-L/T*)
- RJ45 To Dual Bantam Cable
- Ethernet Cable
- AC Adapter/Charger
- RS232 PC Interface Cable
- Carrying Case w/ Strap
Request a Quote for
JDSU SmartClass T1 Tester
The JDSU SmartClasss T1 is a handheld field tester for the installation and commissioning of T1 services. An economical and easy to use pointsolution, the SmartClass has a Smart Auto Configure (AutoConfig) feature and large, easy to read color display that make the lightweight, rugged, tester ideal for both service provider and contractor field technicians. It also meetsthe needs of mobile operators in the construction of T1 backhaul infrastructure. The SmartClass T1 can be used in theCentral office, in the field, and at the point of demarcation.
Features:
Applications:
Specifications:
For full JDSU SmartClass T1 product specifications, please click here: JDSU SmartClass T1
The JDSU SmartClasss T1 is a handheld field tester for the installation and commissioning of T1 services. An economical and easy to use pointsolution, the SmartClass has a Smart Auto Configure (AutoConfig) feature and large, easy to read color display that make the lightweight, rugged, tester ideal for both service provider and contractor field technicians. It also meetsthe needs of mobile operators in the construction of T1 backhaul infrastructure. The SmartClass T1 can be used in theCentral office, in the field, and at the point of demarcation.
Features:
- Thorough T1 testing including BERT, Loopcodes, and NIU/ CSU emulation
- VT100 Emulation for access to T1, HDSL, HDSL2, HDSL4 wire performance statistics
- T-Berd advanced stress patterns, intelligent repeater loop codes, and built in BERT patterns included
- Supports JDSU Hand Held Manager for result download and configuration management
- Lightweight, rugged, water resistant, and battery powered handheld test instrument.
Applications:
- Terminate, Monitor, bridge, and local loopback modes of operation
- Full or Fractional (NX64,NX56) T1 Bert testing
- Perform VF level, frequency and VF Channel drop
- DS1 Frequency and level Measurements
- Timing Slips Analysis
- Round-Trip delay
- Pulse shape
- Jitter
Specifications:
General | |
Overall dimensions | (H x W x D) 9.05 x 4.72 x 1.97 in 230 x 120 x 50 mm |
Weight | Less than 2 lbs |
Display | 320x240 color display |
Storage Temperature | -40 to 167 F (-10 to 60C) |
Operating Temperature | 32 to 122 F (0 to 50 C) |
Humidity | 10 to 90% relative humidity, noncondensing |
AC adapter | 100-220 at 60Hz or 200-240 at 50 Hz VAC to 12 VDC, 1.25 amps |
Battery | AA Rechargeable NiMH |
Charging time | Maximum of 5 hours from full |
Transmitter Specification | |
Line Build Out (LBO) Level | LBO of 0, 7.5, 15.0, and 22.5 dB of cable loss at 772 kHz |
LBO Accuracy | +/- 2 dB at 772 kHz relative to an LBO of 0dBsx |
Timing | Internal reference clock: ± 5 ppm ± 1 ppm/year accuracy Recovered from Primary Recovered from Secondary |
Line Codes | AMI or B8ZS |
Error Insert Type | Bit, BPV, CRC, or Frame |
Pulse Shape | With output terminated at 100 ohms resistive load and 0 dB LBO selected, the product shall meet the following: ITU-T Recommendation G.703, ITU-T Recommendation G.704, T1.102-1993 |
Output Jitter | T1.102 - 1993 Table 9 |
T1 Connector | Two [2] RJ48 and 4 Bantam |
Receiver Specifications | |
Bridge | Impedance: > 1000 Ohms Input Range: - 6 to –35.0 dBdsx |
Terminate | Impedance: 100 Ohms +/- 5% Input Range: + 6 to –35.0 dBdsx |
DSX-MON | Impedance: 100 Ohms +/- 5% Input Range: -20 to -30 dBdsx of resistive loss plus 0 to -6 dB of cable loss |
For full JDSU SmartClass T1 product specifications, please click here: JDSU SmartClass T1