JDSU FI-10 Optical Fiber Identifier FI10
Condition: Refurbished
Warranty: 1 YEAR WARRANTY
JDSUメs hand-held optical fiber identifier FI-10 probe is a rugged, easy-to-use installation and maintenance instrument which identifies optical fibers by detecting the optical signals being transmitted through a single mode fiber. By utilizing local detection technology (non-destructive macro-bend detection), the unit eliminates the need to open the fiber at the splice point for identification; eliminating the probability of interrupting service.
Signals detected by the FI-10 include continuous wave (CW), live optical transmission, and low frequency modulated tones at 270, 1000 and 2000 Hz.
When traffic is present on the fiber tested, the direction of transmission is indicated by LEDs illuminating on the probe.
During maintenance, installation, rerouting, or restoration it is often necessary to isolate a specific fiber from a bundle without disrupting service. By simply clamping the FI-10 onto a fiber, the unit will indicate if there is no signal, a 270, 1000 or 2000 Hz tone, or traffic and show signal direction.
The FI-10 has the widest environmental operating range of any optical fiber identifier on the market today.
Highlights
- Operates from 800-1700 nm.
- Compatible with most AT&T and Corning optical fiber.
- Uses non-destructive, macro-bending technology.
- Detection sensitivity of -40 dBm.
- Bi-directional traffic indication.
Applications
- Live fiber identification.
- 270 Hz, 1000 Hz, and 2000 Hz modulated tones detection.
Key Features
- High-intensity LED indication of active signal transmission.
- Interchangeable adapter heads for jacketed, coated or ribbon fiber.
- Low battery indication.
- Operates using one hand.
Specifications
Optical characteristics (using Corning 1528) | |
Detection technique | non-destructive macro-bending |
Typical loss | <0.6 dB @ 1310 nm typical |
Spectral response | 800 nm to 1700 nm |
Detector sensitivity (MDSP)* | -40 dBm typical (equivalent core power) |
Optical tone receiver | 270 Hz, 1 kHz, 2 kHz |
Minimum fiber slack | 0.75 inches/19 mm required for detection |
Fiber compatibility | |
Dual window single mode | 8 to 10 µm core diameter |
Coating diameter | 250 µm diameter |
Coating | High refractive index acrylate |
Electrical characteristics | |
Power | one 9 V Alkaline battery |
Operation | approx. 10,000 readings |
Environmental conditions | |
Operating temperature | -20 to +50°C |
Storage temperature | -40 to +60°C |
Humidity | 0 to 90% non-condensing |
Physical length | 7.5 inches/190 mm |
Width | 11/4 inches/32 mm |
Depth | 1 inch/25 mm |
Weight | 7.5 oz/213 grams |
* Mean detectable signal power for single mode fiber at 1310 nm
For full JDSU FI-10 product specifications, please click here: JDSU FI-10
JDSU FI-10 Optical Live Fiber Identifier
270Hz, 1000Hz, & 2000Hz Modulated Tones Detection
JDSU FI-10 FI10 Optical Fiber Identifier Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 24265
- JDSU FI-10 Optical Fiber Identifier w/ Instructions (BC# 24265-L/T*)
- 3mm Adapter Head
- 900 Adapter Head
- 2mm Adapter Head
- Carrying Case