JDSU Acterna HST-3000 SIM CU/DDS-LL Module
Condition: Refurbished
Warranty: 90 Day Exchange
HST-3000 SIM CUDDS-LL Module
Quickly Qualify and Troubleshoot Local Loop Installation
DDS continues to provide a revenue stream for local loop services. However, installing DDS services at the customer?s premises can be extremely time-consuming and expensive. Technicians need to deploy and troubleshoot 4-wire DDS services effectively and efficiently, the first time. Meet these challenges with an easy-to-use, versatile test solution that reduces failures and repeat rates and enhances efficiency and ensures consistent test practices.
Service providers, end users, and manufacturers can use the high-quality, proven HST-3000 to qualify and install local-loop services. Automated setups and advanced testing features give the control needed to initiate faster service turn-up and maintenance, better workforce productivity, lower costs, and increased profitability.
Features:
- Test DDS rates from 2.4 to 64 kbps
- Field-portable solution for 4-wire DDS service testing
Test the Copper, Test the Service, Improve the Process
Equipped with the Copper Testing option and a copper Service Interface Module , the HST-3000 can quickly troubleshoot the local loop for line impairments that degrade or impair T1 performance. With the HST-3000, technicians can quickly identify and locate cable impairments: shorts, grounds, opens, crosses, bridged taps, wet sections and other high resistive faults. These impairments are easy to access with the HST-3000's advanced time domain reflectometer (TDR), precision digital volt/ohm meter (DVOM) and an accurate resistive fault locator (RFL) to pinpoint troubles prior to circuit installation. Copper test features are optimized for use anywhere on the local loop at the NID, cross box, pedestal, main distribution frame or anywhere a technician might gain access to the local loop to locate the source of trouble.
Test the Copper Test the Triple Play
- DVOM
- TDR
- Balance
- Loads
- Opens Complete copper testing to support VDSL/VDSL2 and triple-play deployments
- Expanded copper testing frequency range
- Tx/Rx Tones ranging from 100 kHz to 30 MHz
- Wideband Noise measurements from +15 to -90 dBm
- Impulse Noise measurements from +15 to -60 dBm
- Spectral analysis with spectral masks and band plans up to 30 MHz (-28 to -150 dBm/Hz)
Specifications:
| Operating Modes | Terminate |
| Term Impedance | Rx 135 Ohms ±5% |
| DDS Data Rates | 2.4, 4.8, 9.6, 19.2, 56, and 64 kb |
| Secondary Channel | IDLE, 511, 2047 |
| Data Support | BERT |
| Clock Source Internal | Internal Recovered |
| Receive Signal Range | +6.0 to ?43dB (56 to 64k rates) +6.0 to ?34 dB (all other subrates) |
| Transmitter Output Levels | 0, 3, 6, and 9 dB |
For full JDSU CU/DDS-LL product specifications, please click here: JDSU CU/DDS-LL
Acterna HST-3000 SIM CU/DDS-LL Copper DDS Local Loopback Module
Works With The HST-3000C Mainframes (Sold Seperately)
HST3000 HST 3000 HST-3000 HST3000C HST 3000C CU DDS LL CU / DDS-LL
JDSU HST-3000 CU/DDS-LL DDS Loopback Service Interface Module CU/DDSLL DDS Loopback Service Interface Module Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 29068
- JDSU HST-3000 SIM CU/DDS-LL Module (BC# 29068)