JDSU Lil' Buttie Ranger Telephone Test Set LB255

• JDSU LB255 Lil' Buttie Ranger
• JDSU LB81 Test Set Boot
• JDSU LB40 Headset
• JDSU LB30 Cable With Bed Of Nails Clip
• JDSU Belt Pack With D-Ring And Belt Loop
• Original Factory Box

 JDSU Lil' Buttie Ranger Telephone Set
The Lilﾒ Buttie Rangerﾙ Telephone Test Set is an advanced, DSL-safe telephone test set for use by data com, telecom, and cable installers and repair technicians. The compact test set is small enough to wear on a belt or fit in a pocket and features a shape that is comfortable to hold. The LCD display shows on-hook voltage, off-hook current, and polarity as well as caller ID, call waiting caller ID, number dialed, setup, scrolling list of stored numbers, battery condition, and other information.

Advanced features of the Ranger include DigiViewﾙ DTMF decode, for showing and capturing digits as dial-out is in progress; Auto Dial Line Identification (ADLI), for inbound and outbound line identification with caller ID testing; Trafixguardﾙ, for sensing digital lines and identifying under- and over-voltage conditions; Insta-Talkﾙ, an amplified speaker with simultaneous intercom capa bility for talking while testing; and Wink Detector, for display of line reversals.

Features:

• Provides DSL-safe operation
  ﾕ Views and stores digits as dial-out is in progress
  ﾕ Identifies inbound and outbound lines
  ﾕ Senses under- and over-voltage conditions
  ﾕ Detects and displays caller ID and call waiting caller ID
  ﾕ Alphanumeric LCD with icon flags
  ﾕ Hands-free operation even with hard hat on
  ﾕ Eliminates popping and clicking when attaching to a line

Specifications:

General
Interfaces
Telephone system	Modular telco
Headset	2.5 mm cell-phone type
Ringer Equivalence In Bell mode	0.0 (no ringer load)
Pulse Dialing
Pulse rate	10 pps ±0%
Make/break ratio	40% to 60% ±2%
Interdigit interval	820 ms
Resistance during break	120 k?
Tone Dialing DTMF output (into 600?)
Tone-frequency error	±1.5%
Tone level ﾖ High group ﾖ Low group	ﾖ6 ±2 dB ﾖ8 ±2 dB
High vs low difference:	2 ±1 dBm
Flash Duration	600 ms ±50 ms or 100 ms ±10 ms, set at factory
Pause Duration	Tone 3 s Pulse 3.4 s
Memory	Battery backed-up memory stores eight programmed phone numbers (24 numbers ea) and associated names (16 characters), plus last-number redial.
Memory retention with battery	>2 yrs
Return Loss	14 dB at 600 ?
Line-Current Range	5 to 120 mA
Apparent Line Resistance	275 at 20 mA
Monitor Mode Impedance	>230 k?
Measurement Voltage	0 to 128 V DC ±5%
Current	10 to 140 mA ±5%
User Controls	ﾖ One left-side-mounted TALK/BELL/MON slide switch for  operating mode ﾖ One right-side-mounted microphone mute push button  (tap to lock or hold down) ﾖ Six front-mounted push buttons for various options ﾖ One standard, front-mounted, 12-key phone keypad
Indicator	One front-mounted, 2-line x 16-character reflective, gray-mode, super-twisted liquid-crystal display (LCD) panel
Connectors	To telephone network RJ12 (6-wire RJ11) female To headset 2.5 mm cell phone headset jack
Power	From a 9 V DC alkaline battery, typical, included: Bell mode (timed out)
Bell mode (timed out)	20 µA
Talk mode	CWCID
Off	4 mA
CWCID on	12 mA
Monitor mode	27 mA
Battery Life For a typical 9 V DC, 540 mA-hr alkaline battery (included)
Operating	20 hrs (min), 112 hrs (max
Standby	1yr
Typical	25 to 40 hrs
Environmental
Maximum altitude	3048 m (10,000 ft) operating
Temperature ﾖ Operating	0 to 50° C (32 to 122° F)
ﾖ Storage	ﾖ20 to 60° C (ﾖ4 to +140° F)
Humidity tolerance	10 to 90%, non-condensing
Enclosure	High-strength ABS plastic
Physical
Length (w/o lanyard)	18.4 cm (7.25 in)
Width	6.4 cm (2.50 in)
Height	4.3 cm (1.68 in)
Weight (with cable set)	<284 gm (10 oz)

For full JDSU Lil Buttie Ranger specifications, please click here: JDSU Lil Buttie Ranger

Having trouble viewing this file? Click this link to download