JDSU T-BERD 2000 4146 SM MM Quad OTDR

 JDSU T-BERD 2000 Modular Test Set
Costs, workflow, quality, network performance, and customer experience are critical for the success of today?s fiber optic networks. Selecting the right test tools has become key toward meeting these needs.

The JDSU T-BERD 2000 is a handheld multi-test platform that provides field technicians with a single handheld unit to install, turn-up and maintain these networks to the highest standards.

Its innovative design ensures that all essential fiber test tools are close at hand, whatever the job or location. A large color screen with graphical user interface drives simple operation and optimal workflow in the field.

Test capabilities include a range of OTDR modules for multimode and single-mode testing, as well as a range of FiberCompleteTM modules for automated Insertion Loss/Optical Return Loss (IL/ORL), and fault finding. Both OTDR and FiberComplete modules are passive optical network (PON) optimized. The unit is also ready for conector end face pass/fail analysis to IEC standards with a digital analysis microscope.

Widest Range of Applications for Maximum Flexibility
The T-BERD 2000 provides the largest range of test capabilities offered in one handheld unit. The modular design allows service providers the maximum flexibility to scale their investment and evolve with the growth of their network.
The instrument supports the whole range of essential fiber analysis tools including connection inspection, connection check, source, ORL, OTDR, a power meter, a PON selective power meter, and CWDM optical spectrum analyzer.

Application modules used with the T-BERD 2000 can also be used with the T-BERD 4000 and the two products are interoperable.

Boosted Productivity with Seamless Data Workflow
The T-BERD 2000 integrates various communication capabilities allowing remote control, data and setup uploads/downloads, and report transfer. The unit has one high-speed 1G Ethernet port and three USB ports.

Features:

• Large 5-inch touch-screen display
• Field-installable modules
• Wide range of OTDR modules including Quad and PON
• FiberComplete automated IL/ORL, PON power meter, and CWDM analyzer
• Automated fiber inspection and IEC pass/fail analysis
• New-generation lithium polymer (LiPo) battery for 8-hour operation
• Cross-compatible with T-BERD 4000

Specifications:

General (typical at 25°C)
Display	5-inch TFT color touch screen (12.5 cm)  Resolution 800 x 480 WVGA
Interfaces	Two USB 2.0 ports  One mini-USB 2.0 port  RJ-45 LAN 10/100/1000 Mbps
Internal memory	1 GB (128 MB for storage)
Battery	Rechargeable lithium-polymer battery  8-hour operation as per Telcordia GR-196-CORE
Power supply	AC/DC adapter, input 100-250 VAC,  50-60 Hz; 2.5A max, output 12 VDC, 25W Electrical safety: EN60950-compliant
Size with module (H x W x D)	175 x 138 x 80mm  (6.9 x 5.4 x 3.2 in)
Weight with battery with battery and LM OTDR	0.864 kg (1.89 lbs) 1.21 kg (2.67 lbs)
Temperature	Operating: -20 to +50°C (-4 to 122°F)  Storage: -20 to +60°C (-4 to 140°F)
Relative humidity	0% to 95% non-condensing
Built-In Power Meter Specifications
Calibrated wavelengths	850/1310/1490/1550/ 1625/1650
Wavelength range	800 to 1650 nm in 1 nm steps
Accuracy	±0.2 dB
Measurement range	+5 to -50 dBm
Maximum resolution	0.01 dB/0.01nW
Connector type	Universal push pull (UPP)

 

4146 Quad OTDR Module

Singlemode	1310/1550nm
RMS Dynamic Range	37/35 dB
Dead Zones	0.9/4 m
Multimode	850/1300nm
RMS Dynamic Range	27/25 dB
Dead Zones	0.8/4 m

JDSU P5000i Digital Fiberscope
The #1 cause for troubleshooting in optical networks is contaminated fiber connectors. To address this problem, the International Electrotechnical Commission (IEC) has developed a standard for acceptable fiber end-face quality. Yet certifying compliance to this standard can be a time-consuming, complex, and subjective procedure.

The P5000i is a digital handheld microscope that automatically inspects and certifies the end faces of fiber connectors according to industry standards and specifications. This digital microscope provides instant pass/fail results at the push of a button, eliminating subjective and time-consuming guesswork.

Compatible with multiple platforms, including T-BERD®/MTS-2000/4000/5800/6000A, 8000v2, HST-3000, Certifier40G, CellAdvisor JD720C, laptops, PCs, and Android mobile devices, the P5000i provides fast, repeatable analysis that easily integrates into existing test procedures. The world’s leading manufacturers, installers, and service providers already rely on JDSU to certify their fiber connectors. Whether testing on the production line or in the field, the P5000i gives any technician that handles fiber the same capabilities in the palm of their hand.

The World’s Most Versatile Pass/Fail Analysis Solution
The P5000i works with JDSU solutions that users rely on daily for essential testing. This means that users can guarantee connector compliance to industry standards with a fast, repeatable analysis that easily integrates into their existing test procedures. It easily connects with JDSU test solutions and mobile devices via a simple USB connection.

Features:

• Connects via USB with multiple devices including JDSU tools, laptops/PCs, and Android mobile devices
• Repeatable pass/fail analysis eliminates subjective guesswork from the measurement process
• User-selectable acceptance profiles allow certification to any acceptance criteria
• Includes FiberChekPRO™ software for analysis and reporting with laptops/PCs
• Automatic image centering ensures the fiber always appears in the center of the screen
• Detailed report generation to certify and document results
• Dual magnification (200X and 400X) functionality provides highlevel and detailed inspection and analysis
• Magnification toggle button allows easy switching in both live and analysis views
• Accepts FBPT series tips for comprehensive support for all connector types used in today’s network

Specifications:

General Technical (typical at 25°C)
Weight	110 g (3.88 oz)
Dimensions (w × h × d)	140 x 46 x 44 mm (5.5 x 1.8 x 1.7 in)
Low mag field-of-view (FOV)	Horizontal: 740 µm Vertical: 550 µm
High mag field-of-view (FOC)	Horizontal: 370 µm Vertical: 275 µm
Live image	640 x 480 fps
Connector	USB 2.0 (backwards compatible to USB 1.1)
Cord length	183 cm (6 ft)
Camera sensor	2560 x 1920, 1/2.5-in CMOS
Particle size detection	<1 µm
Light source	Blue LED, 100,000+ hour life
Lighting technique	Coaxial
Power source	USB Port
Certification	CE

For full JDSU T-BERD 2000 4146 Quad product specifications, please click here: JDSU T-BERD 2000 4146 Quad
 

Having trouble viewing this file? Click this link to download