Agilent Keysight N9010B 26.5GHz EXA X-Series Signal Analyzer w/ Options
Condition: Refurbished/Calibrated
Warranty: 1 Year Warranty
Shipping: USA & Worldwide
- Agilent Keysight N9010B 26.5GHz EXA X-Series Signal Analyzer : (BC# -L/T*)
- Installed Options:
- MTU: Multi-touch User Interface
- PC7: Intel® Celeron® CPU 1020E @ 2.2 GHz, 8GB
- SSD: Additional Removable Solid State Drive
- W7X: Windows Embedded Standard 7
- 526: Frequency Range, 10 Hz to 26.5 GHz
- B25: 10 MHz/25 MHz analysis bandwidth
- EP5: Enhanced phase noise
- P26: Preamplifier, 26.5 GHz
- MTU: Multi-touch User Interface
- Installed Options:
- Power Cord
- User Manual on CD
Agilent Keysight N9010B 26.5GHz EXA X-Series Multi-Touch Signal Analyzer
Key Features and Functions
- Address diverse needs with the fast, flexible EXA
- Get the most cost-effective analysis for millimeter-wave measurements
- Measure the smallest signals in the presence of large ones with best-in-class
- Perform power measurements quickly at discrete frequency points with list-sweep mode
- Simplify testing with X-Series measurement apps
Enhance signal analysis with premium capabilities at a cost-effective price
The EXA is your first, best choice when you need maximum value in signal analysis up to millimeter-wave frequencies. It helps you find the answer faster, whether you’re seeking tighter design
margins or shorter test times.
With the EXA, you can save test time in your spurious response measurements with the fast sweep capability. To optimize mixer levels and maximize achievable dynamic range, the EXA is available with either a 2 dB/step mechanical attenuator (all frequency bands) or a 1 dB/step electronic attenuator (up to
3.6 GHz).
– Maximize speed, efficiency, throughput and value in signal analysis
– Enhance test margins and reduce error budgets with excellent performance
– Address multiple test needs with a variety of general purpose measurement applications and frequency coverage
– Meet present and future test needs with upgradeable capabilities
– Increase system uptime with standard two-year calibration cycle
| Frequency Range | 10 Hz to 26.5 GHz |
| Analysis Bandwidth | 25 (standard) and 40 MHz |
| Displayed Average Noise Level (DANL) | -172 dBm at 2 GHz with preamplifier and Noise Floor Extension on |
| Third-order Intermodulation (TOI) Distortion | +19 dBm at 2 GHz |
| Phase Noise (10 kHz offset) | -109 dBc/Hz at 1 GHz; -102 dBc/Hz at 10 GHz |
| Amplitude Accuracy | ±0.27 dB |
| W-CDMA ACP Dynamic RangeW-CDMA ACP Dynamic Range | 68 dBc (73 dBc with noise correction on) |
For full Agilent N9010B Signal Analyzer product specifications, please click here: N9010B