Keysight N9951B 44 GHz FieldFox Handheld Microwave Analyzer
Condition: Refurbished / Calibrated
Warranty: 1 YEAR WARRANTY
Shipping: USA & Worldwide
- Keysight N9951B 44 GHz FieldFox Handheld Microwave Analyzer (BC# -L/T*)
- AC Adapter
- Power Cord
- Carrying Case (G)
Keysight N9951B 44 GHz FieldFox Handheld Microwave Analyzer
The Keysight N9951B 44 GHz FieldFox Handheld Microwave Analyzer is a portable test instrument used to install, maintain, and troubleshoot RF and microwave systems. Its base configuration provides cable and antenna testing, while optional software adds capabilities such as vector network analysis and spectrum analysis. This flexible design allows technicians and engineers to perform several types of high-frequency measurements with one instrument.
For cable and antenna measurements, the N9951B operates from 300 kHz to 44 GHz. It helps users evaluate impedance matching, reflected signals, and cable performance to identify problems that can reduce system efficiency. Distance-to-Fault measurements help locate discontinuities along a cable, supporting investigations of damaged sections, poor connections, and other transmission-path issues.
With the appropriate vector network analyzer options installed, the N9951B measures how signals pass through and reflect from components such as filters, amplifiers, and cables. Magnitude and phase measurements provide information about insertion loss, gain, and impedance behavior. Full two-port S-parameter capability enables detailed characterization in both directions, helping users verify components and troubleshoot complete RF signal paths.
Optional spectrum analysis covers frequencies from 9 kHz to 44 GHz, allowing users to examine signal levels, identify unwanted emissions, and investigate interference. Available real-time spectrum analysis configurations provide up to 120 MHz of gap-free analysis bandwidth, helping reveal brief or intermittent signals. These capabilities support demanding communications, radar, and microwave testing applications, with availability determined by the instrument’s installed options.
Designed for fieldwork, the N9951B combines a rugged, battery-powered enclosure with a portable design weighing approximately 3.4 kg. Measurement storage and data-transfer functions help users document results and prepare reports after testing. By bringing cable, antenna, network, and signal-analysis capabilities into a configurable handheld platform, it helps teams diagnose faults and verify equipment performance directly at the installation site.
Features:
- Up to 44 GHz coverage: Tests RF, microwave, and millimeter-wave systems.
- Cable and antenna testing: Included in the base configuration, covering 300 kHz to 44 GHz.
- Return loss and VSWR measurements: Evaluates impedance matching and reflected signals.
- Distance-to-Fault measurements: Helps locate discontinuities in cables and connections.
- Optional vector network analysis: Measures component transmission and reflection, including magnitude and phase.
- Optional full two-port S-parameters: Measures S11, S21, S12, and S22 for detailed device characterization.
- Optional spectrum analysis: Examines signal levels and interference from 9 kHz to 44 GHz.
- Optional real-time spectrum analysis: Provides up to 120 MHz of gap-free bandwidth for capturing intermittent signals.
- Optional wireless signal analysis: Supports selected 5G NR and LTE over-the-air measurements.
- Optional GPS/GNSS functions: Supports measurement geolocation and timestamping.
- Measurement storage and transfer: Saves results for documentation, comparison, and reporting.
- Software-enabled upgrades: Adds supported measurement capabilities through licenses.
- Rechargeable battery operation: Supports testing away from external power.
| Specification | Keysight N9951B FieldFox Handheld Microwave Analyzer |
|---|---|
| Manufacturer | Keysight Technologies |
| Model | N9951B |
| Instrument type | Handheld combination microwave analyzer |
| Maximum frequency | 44 GHz |
| Standard measurement function | Cable and antenna testing (CAT) |
| Cable and antenna test frequency range | 300 kHz–44 GHz |
| Vector network analyzer frequency range | 300 kHz–44 GHz, with required options |
| Spectrum analyzer frequency range | 9 kHz–44 GHz, with required option |
| Test port connectors | 2.4 mm male |
| Number of built-in test ports | Two |
| Return loss measurement | Supported |
| VSWR measurement | Supported |
| Distance-to-Fault measurement | Supported |
| Vector network analysis | Optional |
| Full two-port S-parameters | S11, S21, S12, and S22, with required options |
| Magnitude and phase measurements | Available with appropriate VNA options |
| Spectrum analysis | Optional |
| Real-time spectrum analysis | Optional |
| Maximum real-time analysis bandwidth | Up to 120 MHz, with required options |
| Maximum IQ streaming bandwidth | 1 MHz, with required options |
| 5G NR and LTE analysis | Available with appropriate options |
| GPS/GNSS functions | Optional; requires suitable hardware and accessories |
| Measurement storage | Saves measurement results and instrument setups |
| Power source | Rechargeable lithium-ion battery or external AC/DC adapter |
| Weight | Approximately 3.4 kg / 7.4 lb |
| Upgrade capability | License-enabled measurement options |
| Typical applications | Cable and antenna testing, component characterization, interference investigation, and RF/microwave maintenance |