Megger S1-5010 5 kV Diagnostic Insulation Resistance Tester
$2,395.00
Availability:
In stock
SKU
MG14
Condition: Refurbished / Calibrated
Warranty: 1 Year Warranty
Shipping: USA & Worldwide
- Megger S1-5010 5kV Diagnostic Insulation Resistance Tester (BC# -L/T*)
- (3) 3M Test Leads
- PC Download Software
- (5) Test Record Cards
- Accessory Pouch
- RS232 PC Interface Cable
- User Guide
Request a Quote for
Megger S1-5010 Diagnostic Insulation
Tester
The S1-5010 is an advanced insulation tester for measurement of insulation resistance of all types of electrical equipment. The instrument performs automatic tests, enabling consistent operation without operator input, plus stores results and can be operated from a PC. Flexible power supply options and robust, portable construction allow the instrument to be used in a wide variety of applications. It is particularly suitable for analysing the insulation of large machines, HV generators and cables.
Measurements:
For full Megger S1-5010 Insulation Tester product specifications, please click here: Megger S1-5010
The S1-5010 is an advanced insulation tester for measurement of insulation resistance of all types of electrical equipment. The instrument performs automatic tests, enabling consistent operation without operator input, plus stores results and can be operated from a PC. Flexible power supply options and robust, portable construction allow the instrument to be used in a wide variety of applications. It is particularly suitable for analysing the insulation of large machines, HV generators and cables.
Measurements:
- Insulation resistance measured to >5 TW
- Also measures voltage, (test) current and capacitance
- Superb guarding circuit for removing surface leakage from the measurement
- Fast measurement circuit, new reading every second
- Test current measurement down to 0,01 nA
- 500 V, 1000 V, 2500 V & 5000 V standard test voltages
- Variable test voltage 25 V to 5000 V
- Test timer up to 90 minutes can be used to stop the test without operator input
- Polarisation index test gives a figure for the amount of moisture & dirt in the insulation
- Step voltage test allows the level of cracks and holes in the insulation to be assessed
- Dielectric discharge test shows up moisture absorbed in the insulation
- Robust tester for field use
- Weatherproof to IP54
- Safety to IEC 1010-1 for maximum user protection from electric shock
- Mains and batttery powered
- Battery can be charged during testing
- Automatic charge voltage selection
- At least 8 hours testing with a fully charged battery
- Battery voltage is constantly monitored and displayed
- Backup battery for data memory storage
- Results displayed in digital, analogue and graphic form
- Large, backlit, dot-matrix LCD visible in all light conditions
- Internal storage for up to 75 test results
- Results are numbered and date/time stamped
- Isolated RS232 output
- Display can be set to English, French, Portuguese or Spanish
- Switchable digital filter to remove induced noise
- Interference rejection up to 4 mA
- Coded protection prevents unauthorised use of instrument
- Operation from PC with optional Windows software
| Test Voltages | 500, 1000, 2500, 5000 V 25 to 5000 V in 25 V steps |
| Test Voltage Accuracy | ±5% on 10 MW load & above |
| Nominal Test Current Limit | 2 mA or 5 mA (Selectable) Charge time: <5 s per µF at 2mA <2.5 s per µF at 5mA |
| Measurement Range | |
| Digital | |
| Resistance | 10 kW to 500 GW @ 500 V
10 kW to 1 TW @ 1000 V 10 kW to 2,5 TW @ 2500 V 10 kW to 5 TW @ 5000 V |
| Voltage | 50 to 1000 V a.c./d.c. (5000 V when testing) |
| Current | 0,01 nA to 999 µA |
| Capacitance | 0,01 µF - 10,0 µF |
| Analogue | |
| Resistance | 10 kW to 1 TW |
| Accuracy (0 to 30°C) | |
| Resistance | ±5% of reading (1 MW to 1 TW @ 5kV) |
| Voltage | ±2% ±1 V |
| Current | ±5% ±0,2 nA |
| Capacitance | ±5% ±0,01 µF |
| Interference rejection | 4 mA at 50/60 Hz for <5% additional error |
| Maximum capacitance discharge rating 20,0 µF | |
| Guard terminal | Guards out parallel resistance down to 250 kW Maximum additional error 5% @ 100 MW |
| Operational supply | 90 - 280 V a.c. 12 - 15 V d.c |
| Test time | 1 second to 90 minutes |
| Battery | Internal rechargeable 12 V, 7 Ah lead acid battery |
| Battery life | At least 8 hours from a fully charged battery |
| Battery Indicator | Bargraph style level indicator (10 segments) |
| Display | Backlit dot matrix LCD (256 x 128 pixels) |
| Safety | Conforms to IEC 1010-1 (1995) Voltmeter rated for use on 300 V phase to earth systems, category III |
| Environmental Protection | IP54 with side door closed |
| EMC | Meets EN50081-1 and EN50082-1 (1992) |
| Temperature Coefficient | Measured current (>100 nA)
0,2%/°C
Measured voltage 0,1%/°C |
| Temperature Range | Operating -10°C to 50°C
Storage -20°C to 60°C |
| Altitude Maximum | 2000 m |
| Humidity Range | 95% RH non condensing at 40ºC |
| Weight |
9 kg |
| Dimensions | 327 x 316 x 196 mm |
For full Megger S1-5010 Insulation Tester product specifications, please click here: Megger S1-5010