AFL Noyes OPM 4-4D & OFS 300 Fiber Inspection Kit
Condition: Refurbished
Warranty: 90 Day Exchange
Shipping: USA & Worldwide
- Noyes OPM 4-4D Optical Power Meter (BC# 19440)
- Power Meter:
- 850nm
- 980nm
- 1310nm
- 1490nm
- 1550nm
- 1625nm
- FC Connector For Power Meter
- Power Meter:
- Noyes OFS 300-200C Optical FiberScope w/ Carrying Case (BC# 19439)
- SM FC-FC Fiber Cable
- MM FC-FC Fiber Cable
- (4) Fiber Optic Wipes
- User Manual On CD-ROM
- Carrying Case (G)
OPM 4-4D Optical Power Meter
The OPM 4 optical power meter may be used to measure optical power in Premises, Telco, or Broadband fiber optic networks. When used with an LED or Laser light source, the OPM 4 also measures insertion loss of multimode or single-mode cables. The OPM 4 offers Wave ID, automatic wavelength identification and switching, when used with the OLS 1 Dual or OLS 2 Dual or OLS 4 with Wave ID feature. Multiple test Tone detection is provided for fiber identification. The OPM 4 stores optical references for each calibrated wavelength. An easy to read Dual Wavelength LCD display with Backlight shows measured power [dBm or µW] or insertion loss [dB], calibrated wavelengths, tone signal [Hz], wavelength ID, and the battery charge status. In addition to being powered by two AA alkaline, the OPM 4 can be powered by optional AC adapter and/or rechargeable NiMH battery pack. The OPM 4 optical input port accepts Noyes thread-on style adapter caps. Adapter caps are required for operation and must be ordered separately. The OPM 4 is fully N.I.S.T. traceable.
Features:
- Rugged, handheld, lightweight
- Multimode or single-mode applications
- Premises (Ge), Telco (InGaAs), and Broadband (+26 dBm) models
- Wave ID - automatic wavelength identification and switching
- Passive Optical Networks (PON) testing
- Dual Wavelength testing
- 270 Hz, 330 Hz, 1 kHz, and 2 kHz Tone detection
- Large LCD with Backlight
- Power measurements in dBm or µW; insertion loss in dB
- Reference power level storage
- AA alkaline, optional rechargeable NiMH battery pack
- Battery Gauge
- N.I.S.T traceable
| Calibrated Wavelengths (nm) | 850, 980, 1310, 1490, 1550, 1625 |
| Detector type | Filtered InGaAs |
| Measurement range (dBm) | +26 to -50 |
| Tone detect range (dBm) | +6 to -30 +6 to -25 for 850nm |
| Wavelength ID range (dBm) |
+6 to -30 +6 to -25 for 850nm |
| Accuracy (dB) | ± 0.25 |
| Resolution (dB) | 0.01 |
| Measurement units | dB, dBm, µW |
OFS 300-200c
The OFS 300 is a versatile instrument for the inspection of optical fiber connectors. By employing a universal adapter mount, the OFS 300 offers the ability to inspect virtually any connector style for scratches, dirt, or other problems normally associated with poor transmission performance.
The OFS 300-200C offers precision 200x magnification to easily inspect both multimode and single-mode fiber optic connectors.
The OFS 300 offers 60 hours of continuous battery life. A low battery indicator will flash when approximately 8 hours of optimum brightness remains reducing the risk of eye strain. Various adapter caps are available to convert the mount to the desired connector style. The OFS 300-200C uses the same common threaded connector adapter caps as the Noyes Optical Power Meters and Loss Test Sets.
Specifications:
| Optical Specifications | OFS 300-200C |
| Nominal magnification | 200X |
| Adapter cap Mount | thread-on (Universal) |
| Safety filter | Schott KG3 > 40 dB IR |
| General Specifications | |
| Operating temperature | 0 to +50°C |
| Storage temperature | -20 to +50°C |
| Power | 2 AA alkaline batteries |
| Weight in use | 1.5 lbs. (.67 kg) |
| Size (H x W x D) | 5 x 2 x 8 in. (13 x 5 x 20 cm) |
For full Noyes OPM 4 product specifications, please click here: Noyes OPM 4