Olympus IPLEX FX IV8420 Industrial Inspection VideoScope

Olympus iPLEX FX IV8420 Industrial Videoscope

A Revolution in Remote Visual Inspection has arrived

Introducing a videoscope system that combines portability with performance; modularity with reliability; simplicity with advanced functionality; ease of use with durability. Only one product does this — the new IPLEX FX.

Cast Magnesium-alloy Chassis for Impact Resistance

The main component of the IPLEX FX base unit chassis is magnesium — renowned for its strength and light weight. A typical material used for industrial environment equipment, magnesium was chosen to provide the impact resistance and solid base that withstands the knocks and bumps that commonly occur to industrial videoscopes. In addition to a crush-resistant chassis each corner is protected by rubber bumpers, further softening a drop and maximizing product reliability while reducing potential for damage. The IPLEX FX survived the repetitive 4-foot drop test for compliance to MILSTD 810G.

Abrasion Resistant Insertion Tube

The most critical component of any remote visual inspection tool is the insertion tube. It performs the basic requirement of accessing the inspection area and frequently navigating through narrow paths with abrasive and rough surfaces. The IPLEX FX insertion tube is the latest Olympus IPLEX design, with enhanced crush protection and fray resistance. Strength was added to the insertion tube without compromising the flexibility and ability to navigate through the most difficult inspections. As with all of our IPLEX products, the IPLEX FX is designed with the Olympus Tough TaperFlex graduated stiffness design for maximum scope flexibility towards the scope end. The IPLEX FX scope unit is available in three insertion tube diameters: 6.0 mm, 4.0 mm and a 6.2 mm model with internal working channel.

True Portability — Compact, Lightweight, Battery-powered 

Power is provided to the IPLEX FX by an internally mounted, Lithium-ion battery which provides over two hours run-time. The compact size of the IPLEX FX makes portable operation a reality — either body-wear the lightweight system or place it on a surface and allow the non-slip, rubber corners to hold it in place while you carry out your inspections.

Temperature Resistance

The IPLEX FX scope units are resistant to insertion in higher temperature environments — now 100° C (212° F) meaning that inspections can take place sooner as you won’t need to wait as long for the area to cool. Additionally, a temperature sensor provides a two-stage visual warning in order to prevent overheating.

Resistance to Harsh Environments

To prevent the ingress of debris, all mechanical joints are hermetically sealed and input/output connectors are covered.

IPLEX FX complies with internationally recognized Military Standards.* This compliance assures a greater level of environmental performance than regular industry standards and provides increased reliability against dust and fluid.

The inventive design of the FX has removed the need for a cooling fan, and therefore no air intake is required. This results in even greater environmental resistance.

Daylight-view High Resolution LCD Monitor

Clear observation in direct sunlight is made possible with the new 6.5-inch daylight-view LCD monitor — the minimum recommended screen size for accurate and reliable observation of fine detail. Color reproduction and contrast are maintained, ensuring inspections are not compromised when working outdoors. The environmental resistance of the LCD also matches that of the IPLEX FX system.

Optimized Images with Interchangeable LED Tip Adaptors

To provide high quality, faithfully reproduced images and accurate color, the IPLEX FX features an outstanding optical system, new noise reduction and Olympus’ own WiDER™ (Wide Dynamic Extended Range) image processing technology. WiDER™ delivers bright, contrast-balanced images across the entire depth of field.

New LED Illumination with SmartTip™ Optical Adaptors

Now the light source is in the SmartTip™ optical adaptor with LED’s providing illumination, meaning lamp changes are no longer required. This revolutionary new design contributes to reduction in overall system size and power consumption, while maintaining the ability to change direction of view and field of view. This design applies to SmartTip™ optical adaptors for both standard inspections and Stereo Measurement for all three insertion tube diameters. Additionally, Hi-Beam mode boosts illumination up to 1.5x for expanded inspection capability.

Measurement Accuracy

The IPLEX FX uses Stereo Measurement technology for accurate, three-dimensional defect measurement at any target angle. With the addition of Olympus’ unique Multi and Offset Measurement modes, the IPLEX FX offers a more intuitive measurement environment with eight different modes for accurate evaluation of most inspection targets. Multi Measurement mode is a quick two-point defect identification technique that simultaneously calculates point-to-line, area and distance results. Stereo Measurement tip adaptors are available in direct and side view models for all three insertion tube diameters.

IPLEX FX Stereo Measurement Modes :

• Distance
• Point-to-line
• Depth
• Area
• Lines
• Profile
• Multi
• Offset (new)

Interchangeable Scopes

The IPLEX FX offers a range of interchangeable scopes, allowing you to choose the right one to fit the job. This means a single IPLEX FX can be configured for a variety of inspections. Scopes are available in diameters of 4.0 mm (0.157 in) and 6.0 mm (0.236 in) and in various lengths ranging from 2 m (6.6 feet) to 18 m (59.1 feet). A 7.5 m (24.6 feet) scope with a smooth outer coating is also offered. This scope is ideally suited to nuclear and pharmaceutical plant inspections where ease of cleaning and decontamination are priorities.

Our unique Spot-Ranging™ feature is the industry’s only realtime tip-to-target distance measurement tool. As a rule, a videoscope’s measurement accuracy depends on the scope’s distance from the target. With the IPLEX FX, the user can easily determine whether the scope tip is close enough to calculate the most accurate measurement on the first try

Foreign Object Retrieval

Adding to the array of versatile IPLEX FX benefits is a new 6.2 mm (0.244 in) diameter scope featuring an internal working channel. Six retrieval tools allow you to remove foreign objects from inside inspection areas — ideal for helping avoid costly overhauls — and perform hook and drag inspections in engines. Both forward and side view Stereo Measurement tip adaptors are also available with the working channel scope, providing a complete inspection solution.

Specifications:

Olympus iPLEX FX IV8420 Industrial Videoscope

A high-end industrial videoscope system combining portability with advanced functionality, and ease of use with durability. From high image quality inspection to retrieval operation, the versatility achieves various benefits beyond your experience

Includes Accessories As Listed

BC# -L/T*

Olympus iPLEX FX 8420 iPLEXFX8420 Industrial Videoscope Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

• Olympus iPLEX FX IV8420 Industrial Videoscope (BC# -L/T*)
• Battery Pack
• Power Cord
  

Having trouble viewing this file? Click this link to download