Radiodetection RD 7100 DL Cable Pipe Locator w/ TX-3

RD7100 Cable, Pipe and RF Marker Locator

Precision Locator Range
RD7100®, our industry-specific range of underground cable locator equipment, contains advanced locating technologies with each model optimized for the challenges of locating a particular buried utility.

Accurately locating and marking buried assets ensures minimum downtime during repair or maintenance activities. It also prevents damage which can be costly for both you and your customers. RD7100 offers the power of Radiodetection’s most advanced locating technologies, with each cable locator model optimized for a specific industry.

Users benefit from the simplicity of having menu options and capabilities matched to their requirements.

Guidance Mode allows you to quickly follow utility paths
Guidance Mode allows you to rapidly find and follow the path of a buried utility. Directional information is displayed alongside proportional distance arrows to help find the utility and then keep you on its path. The simultaneous display of depth and current information gives confidence the correct utility is being traced even in congested networks. For rough or uneven terrain differentiated audio tones can be used, freeing the user to concentrate on potential hazards.

Automatic usage-logging with GPS positioning
GPS equipped RD7100 locators automatically capture key locate parameters every second, providing a comprehensive picture of individual locates and allowing you to assess usage patterns over periods of a year or more.

The data generated can be used to ensure adherence to best practice, or to identify training needs before poor work habits develop. Additionally, the information can be used for internal audits or shared with stakeholders to enable process improvements, and evidence task completion.

Usage data can be exported in multiple file formats – for example, KML for Google Maps to confirm where and when the work was performed.

Li-Ion rechargeable battery options
Lithium-Ion rechargeable battery options for both locator and transmitter provide extended runtime with reduced running costs.

Peak+™ Mode combines accuracy with speed
Combine the accuracy of Peak locating with the rapid ground coverage of Guidance arrows in the new Peak+™ mode. A single key press lets you check for distortion by comparing Null with Peak.

Power Filters™ pinpoint and discriminate between power cables (PL models)
When a signal transmitter can’t be connected, tracing individual power lines through complex networks can be a real challenge. Conflicting or powerful signals confuse, or combine to create a wash of signal.

With a single key press you can now utilize the harmonic properties of power signals to establish if a signal comes from one source, or from multiple cables, then trace and mark their routes.

RD7100DL(G) Water Industry

With four sonde frequencies, the RD7100DL can be used to trace deep pipes made from a variety of materials including: cast iron, clay, concrete and brick. Additionally, it can be used to locate Cathodic Protection System (CPS) signals applied to pipelines.

TX-3 Transmitter
Based on a fully digital platform, the new family of Radiodetection transmitters supports the entire range of Radiodetection RD7000 and RD8000 cable and pipe locators.

The Tx-1 is a low power transmitter. The Tx-3 has a higher current and induction capability as well as Fault Find. The Tx-10 has the highest current capability with both Fault Find and CD modes as standard.

All models feature a patented three-stage phase sensitive amplifier that delivers a groundimpedance compensated, constant current across its entire bandwidth in either direct connect, clamp or inductive mode. The transmitters use less power and are ergonomically designed to deliver superior performance in a new light-weight, well-balanced case.

The transmitters are 10% lighter than the industry standard T10 yet each is IP54 rated to cope with demanding environmental conditions. Each model has a removable accessory tray and a weatherproof battery compartment. A large, high contrast, backlit LCD screen provides the user with clear information. The interface is intuitive and responsive, allowing the operator to access any feature with ease.

SideStepautoﾙ:
allows the transmitter to calculate the optimum frequency based on ground impedance. The transmitter uses this information to optimize the active frequency. SideStepautoﾙ helps to improve locate accuracy and extends battery life.

All models are compatible with the complete range of RD7000 and RD8000 frequencies in both inductive and direct connect modes. The transmitters use 8 D-cell batteries and can be powered from a vehicle using a 12V cable plug (it is recommended that an approved Radiodetection isolation transformer is used).

As an additional feature, each model has a multimeter function providing measurement of output voltage, line voltage, current, impedance and power.

Features:

• Three power versions 1 Watt, 3 Watt, and 10 Watt
• 8KFF - Locates faults from short circuit up to 2MO
• 5 CD paired low frequencies
• Current delivered at 30V or high voltage mode (90V for high impedance operation)
• The transmitters have 200Hz to 200kHz active frequency range
• Selectable modes support RD7000 and RD8000 specific model locator frequency ranges
• 8 inductive frequencies
• SideStepauto
• Transient overvoltage protection
• Multimeter function

Specifications:

Radiodetection RD 7100 DL Cable Pipe Locator w/ Radiodetection TX-3 3 Watt Transmitter

With four sonde frequencies, the RD7100DL can be used to trace deep pipes made from a variety of materials including: cast iron, clay, concrete and brick. Additionally, it can be used to locate Cathodic Protection System (CPS) signals applied to pipelines.

Sounde Frequencies:
- 512Hz
- 640Hz
- 8kHz (8192Hz)
- 33kHz (32768Hz)

RD 7100 DL RD7100 RD-7100DL TX 3

Radio Detection RD 7100 DL TX-10 RD71000 DL TX3 Cable Pipe Fault Locator Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

BC# -L/T*

• Radiodetection RD7100 DL Locator (BC# -L/T*)
• Radiodetection TX-3 Transmitter (-L/T)