Rohde & Schwarz SMA100A 6GHz Signal Generator w/ Options B22 / B106

Rohde & Schwarz R&S SMA100A Signal Generator

Key features 

Excellent signal quality 

Very low SSB phase noise of typ. –1 34 dBc (20 kHz carrier offset, f = 1 GHz, 1 Hz measurement bandwidth), typ. –141 dBc with the enhanced phase noise performance option (R&S®SMA-B22) 

Wideband noise of –162 dBc (meas.) with carrier offset > 40 MHz, f = 1 GHz, level = 9 dBm, 1 Hz measurement bandwidth 

Nonharmonics of < –96 dBc (carrier offset > 10 kHz, f < 750 MHz, with the R&S®SMA-B22 option)  

High-stability reference oscillator as standard 

Very low phase noise at low frequencies due to internal division of the fundamental frequency range (750 MHz to 1500 MHz) down to 6.6 MHz 

Ideal for use in production

Very short frequency/level setting times of < 700 μs ( meas.) across the entire frequency and level range, < 450 μs in List mode 

 Fast Hopping mode with flexibly addressable frequency and level pairs, as fast as normal List mode 

Frequency setting time of typ. < 10 μs within a bandwidth of up to 80 MHz due to direct access to the DDS-based synthesizer (with the R&S®SMA-B20 or -B22 option; FM EXTERNAL DIGITAL mode) 

Very high level accuracy and repeatability 

High output power of up to +18 dBm, overrange up to +28 dBm 

Electronic attenuator with built-in overvoltage protection over entire frequency range 

Minimum space requirements due to compact size (only two height units) 

Aerospace and defense applications 

Pulse modulator with excellent characteristics (on/off ratio of > 100 dB ( meas.) for f < 5.5 GHz, rise/fall time typ. < 7 ns)

Pulse generator integrated as standard 

Optional high-performance pulse generator with minimum pulse width of 10 ns (R&S®SMA-K23) 

Optional generation of versatile pulse sequences/pulse trains (R&S®SMA-K27) 

Optional chirp modulation (R&S®SMA-B20 or R&S®SMA-B22) 

Optional VOR/ILS modulation (R&S®SMA-K25) 

Optional DME modulation/analysis (R&S®SMA-K26) 

Optional operating altitude up to 4600 m (R&S®SMA-B46) 

Optional removable mass storage (CompactFlash™ card, R&S®SMA-B80) 

All-purpose instrument

Frequency range of 9 kHz to 3 GHz (R&S®SMA-B103/R&S®SMA-B103L) or 6 GHz (R&S®SMA-B106/R&S®SMA-B106L) 

Frequency, level and LF sweeps 

Phase-continuous frequency setting 

AM, broadband FM/φM (R&S®SMA-B20 or R&S®SMA-B22), pulse modulation 

Built-in LF generator up to 1 MHz, optional multifunction generator (R&S®SMA-K24) up to 10 MHz 

Optional low-jitter clock synthesizer up to 1.5 GHz (R&S®SMA-B29) 

Power measurement using R&S®NRP-Zxx power sensors 

Optional power analysis (R&S®SMA-K28) using R&S®NRP-Zxx power sensors for scalar network analysis or automatic pulse parameter measurement 

Intuitive operating concept and versatile interfaces  

Color display with 480 × 272 pixels 

Intuitive user interface with graphical display of signal flow (block diagram) 

Context-sensitive online help 

Remote control via GPIB, LAN or USB 

Selectable control language (SCPI or remote control emulation of various signal generators) 

Remote operation by browser (or VNC client) 

USB connectors (e.g. for keyboard, mouse, memory stick) 

Support of R&S®NRP-Zxx

Rohde & Schwarz R&S SMA100A Signal Generator

Key features 

Excellent signal quality 

Very low SSB phase noise of typ. –1 34 dBc (20 kHz carrier offset, f = 1 GHz, 1 Hz measurement bandwidth), typ. –141 dBc with the enhanced phase noise performance option (R&S®SMA-B22) 

Wideband noise of –162 dBc (meas.) with carrier offset > 40 MHz, f = 1 GHz, level = 9 dBm, 1 Hz measurement bandwidth 

Nonharmonics of < –96 dBc (carrier offset > 10 kHz, f < 750 MHz, with the R&S®SMA-B22 option)  

High-stability reference oscillator as standard 

Very low phase noise at low frequencies due to internal division of the fundamental frequency range (750 MHz to 1500 MHz) down to 6.6 MHz 

Ideal for use in production

Very short frequency/level setting times of < 700 μs ( meas.) across the entire frequency and level range, < 450 μs in List mode 

 Fast Hopping mode with flexibly addressable frequency and level pairs, as fast as normal List mode 

Frequency setting time of typ. < 10 μs within a bandwidth of up to 80 MHz due to direct access to the DDS-based synthesizer (with the R&S®SMA-B20 or -B22 option; FM EXTERNAL DIGITAL mode) 

Very high level accuracy and repeatability 

High output power of up to +18 dBm, overrange up to +28 dBm 

Electronic attenuator with built-in overvoltage protection over entire frequency range 

Minimum space requirements due to compact size (only two height units) 

Aerospace and defense applications 

Pulse modulator with excellent characteristics (on/off ratio of > 100 dB ( meas.) for f < 5.5 GHz, rise/fall time typ. < 7 ns)

Pulse generator integrated as standard 

Optional high-performance pulse generator with minimum pulse width of 10 ns (R&S®SMA-K23) 

Optional generation of versatile pulse sequences/pulse trains (R&S®SMA-K27) 

Optional chirp modulation (R&S®SMA-B20 or R&S®SMA-B22) 

Optional VOR/ILS modulation (R&S®SMA-K25) 

Optional DME modulation/analysis (R&S®SMA-K26) 

Optional operating altitude up to 4600 m (R&S®SMA-B46) 

Optional removable mass storage (CompactFlash™ card, R&S®SMA-B80) 

All-purpose instrument

Frequency range of 9 kHz to 3 GHz (R&S®SMA-B103/R&S®SMA-B103L) or 6 GHz (R&S®SMA-B106/R&S®SMA-B106L) 

Frequency, level and LF sweeps 

Phase-continuous frequency setting 

AM, broadband FM/φM (R&S®SMA-B20 or R&S®SMA-B22), pulse modulation 

Built-in LF generator up to 1 MHz, optional multifunction generator (R&S®SMA-K24) up to 10 MHz 

Optional low-jitter clock synthesizer up to 1.5 GHz (R&S®SMA-B29) 

Power measurement using R&S®NRP-Zxx power sensors 

Optional power analysis (R&S®SMA-K28) using R&S®NRP-Zxx power sensors for scalar network analysis or automatic pulse parameter measurement 

Intuitive operating concept and versatile interfaces  

Color display with 480 × 272 pixels 

Intuitive user interface with graphical display of signal flow (block diagram) 

Context-sensitive online help 

Remote control via GPIB, LAN or USB 

Selectable control language (SCPI or remote control emulation of various signal generators) 

Remote operation by browser (or VNC client) 

USB connectors (e.g. for keyboard, mouse, memory stick) 

Support of R&S®NRP-Zxx power sensors for precise power measurements

power sensors for precise power measurements

Rohde & Schwarz SMA100A 9 kHz to 6 GHz Signal Generator

Installed Options:
- SMA-B22: Enhanced Phase Noise Performance and FM/φM Modulator
- SMA-B106: 9 kHz to 6 GHz, with Electronic Attenuator

Frequency Range: 9 kHz to 6 GHz

Includes Accessories As Listed!

• Rohde & Schwarz SMA100A 9 kHz to 6 GHz Signal Generator (BC# -L/T* )
  • Installed Options:
    • SMA-B22: Enhanced Phase Noise Performance and FM/φM Modulator
    • SMA-B106: 9 kHz to 6 GHz, with Electronic Attenuator
• Power Cord
• User Manual on CD

Having trouble viewing this file? Click this link to download