Sewerin Secorr 08 Professional Water Leak Correlator

$13,195.00
Availability: In stock
SKU
SL10

Condition: Refurbished / Calibrated

Warranty: 1 YEAR WARRANTY

Shipping: USA & Worldwide

  • Sewerin Secorr 08 Professional Water Leak Correlator (BC# - L/T*) 
Request a Quote for

Have questions or doubts? Submit the following request and expect our detailed quote within 24 hours!

We are commited to win your business!

Sewerin Secorr 08 Professional Water Leak Correlator

The Sewerin SeCorr 08 Professional is a portable water leak correlator used to pinpoint leaks in buried, pressurized pipes. Technicians place two sensitive microphones at accessible points, such as valves or hydrants. The unit compares when the leak sound reaches each microphone and uses the pipe’s length, diameter, and material to calculate the leak’s location. This helps repair crews narrow down where to excavate, even when surrounding noise makes a leak difficult to hear. The Professional version also supports saving and reviewing measurements and producing reports.

Features

  • Pinpoints buried water leaks by comparing leak sounds picked up at two points on a pipe.
  • Displays the calculated leak position graphically and as a distance from each sensor.
  • Filters background noise to help locate leaks in noisy areas.
  • Uses wireless transmitters to send sound from the microphones to the receiver.
  • Supports listening and ground microphone modes to help confirm a suspected leak.
  • Saves measurements for later review. The Professional version can also record leak sounds and produce reports using PC software.

 

Specifications:  
Material LEXAN polycarbonate
Device Elements  
Display 320 × 240 dots, LED backlight
Processor 16 bit μC
Operation membrane keypad with 8 keys, jog dial
Operating Conditions  
Operating temperature -10 °C – -40 °C
Storage temperature -20 °C – 60 °C
Humidity 95 % r.h., non-condensing
Protection rating IP65
Non-permitted operating
environments
in potentially explosive areas
Power Supply  
Power supply integrated NiMH battery
or: direct operation with 12 V=
Operating time, typical 8 h
Operating voltage 7.2 V
Charging time 4 h
Charging temperature 0 °C – 40 °C
Charging voltage 12 V
Charging current 1.1 A
Charger LD10-1000x
Measurement  
Filter 0 – 3000 Hz
Sampling rate 28.8 kHz