SKF TMEA 1 Laser Shaft Alignment Tool
$3,429.00
Availability:
Out of stock
SKU
SN20
Condition: Refurbished
Warranty: 1 YEAR WARRANTY
Shipping: USA & Worldwide
Request a Quote for
- SKF TMEA 1 Shaft Alignment Tool (BC# 36404-L/T*)
- SKF S measuring Laser w/ Shaft Fixture (BC# 36406-L/T*)
- SKF M Measuring Laser w/ Shaft Fixture (BC# 36405-L/T*)
- Measuring Tape
- User Manual Hard Copy
- Carrying Case (G)
SKF TMEA 1 Shaft Alignment Tool
Perfect alignment of machinery shafts is crucial to prevent premature bearing failure, shaft fatigue, sealing problems and vibrations. It further reduces the risk of over-heating and excessive energy consumption. The SKF shaft Alignment Tool TMEA 1 offers an easy and accurate way of adjusting two units of rotating machinery so that the shafts of the units are in a straight line.
The TMEA 1 uses two measuring units both provided with a laser diode and a positiong detector. As the shafts are rotated through 180° any parallel misalignment or angular misalignment causes the two beams to deflect from their initial relative psoition. The measurements from the two positioning detectors automatically enter the logic circuitry inside the display unit, which calculates the misalignment of the shafts and advises on corrective alignments of the machine feet. After a straightforward measuring procedure, the tool immediately displays the misalignment of the shafts and the necessary corrective adjustments of the feet of the machine. Since the caluclations are done in real time the progress of the alignment can be followed live.
Specifications:
Perfect alignment of machinery shafts is crucial to prevent premature bearing failure, shaft fatigue, sealing problems and vibrations. It further reduces the risk of over-heating and excessive energy consumption. The SKF shaft Alignment Tool TMEA 1 offers an easy and accurate way of adjusting two units of rotating machinery so that the shafts of the units are in a straight line.
The TMEA 1 uses two measuring units both provided with a laser diode and a positiong detector. As the shafts are rotated through 180° any parallel misalignment or angular misalignment causes the two beams to deflect from their initial relative psoition. The measurements from the two positioning detectors automatically enter the logic circuitry inside the display unit, which calculates the misalignment of the shafts and advises on corrective alignments of the machine feet. After a straightforward measuring procedure, the tool immediately displays the misalignment of the shafts and the necessary corrective adjustments of the feet of the machine. Since the caluclations are done in real time the progress of the alignment can be followed live.
Specifications:
| Measuring Units | |
| Housing material | ABS Plastic |
| Type of laser | Diode laser |
| Laser wave length | 670 - 675 nm (26,4 - 26,6 x 10 in) |
| Laser class | 2 |
| Maximum laser power | 1 mW |
| Maximum distance between measuring units | 1 meter (3 ft) |
| Type of detectors | Single-axis PSD, 10 x 10 mm (0,4 x 0,4 in) |
| Cable length | 1,8m (6 ft) |
| Dimesnions | 118 x 101 x 30 mm (4,6 x 4,0 x 1.,2 in) |
| Weight: | 0,2 kg (0,4 lb) |
| Display Unit | |
| Housing Material | ABS Plastic |
| Display Type | LCD 55 x 77 mm (2,1 x 3,0 in) |
| Battery Type | 3 x 1,5V LR14 Alkaline |
| Operating Time | 24 hours continuous use |
| Displayed resolution | 0,01 mm (0,1 x 10 in) |
| Dimensions | 160 x 140 x 51 mm (6,3 x 5,5 x 2,0 in) |
| Weight | 0,5 k (1,1 lb) |
| Shims | |
| Surface area | 50 x 50 mm (2,0 x 2,0 in) |
| Thickness (10 of each) | 0,05 0, 10, 0,25 0,50 and 1,00 mm (1,9 3,9 9,8 19,6, 39x10 in) |
| Slot width | 13 mm (0,5 in) |
| Complete system | |
| Shaft diameter range | 30 - 500 mm (1,2 - 20 in) |
| Accuracy of system | Better than 2 % ± 1 digit |
| Temperature range | 0 - 40 °C (32 - 104 °F) |
| Relative humidity | < 90 % |
| Dimensions (in carrying case) | 425 x 330 x 115 mm (16,7 x 13,0 x 4,5 in) |
| Weight | 4,3 kg (9,5 lb) |