RadioDetection RD7000DL+ kit with accessories

SPX Radiodetection TX-3 3 Watt Transmitter

Sumitomo FC-6M fiber cleaver

Sumitomo FC-6RM High Precision Single Or Ribbon Fiber Optic Cleaver

SPX Radiodetection TX-10 10 Watt Transmitter

$1,569.00
Availability: In stock
SKU
1CP58

Condition: Refurbished / Calibrated

Warranty: 1 YEAR WARRANTY

Radiodetection TX-10 10-Watt Transmitter

 

Transmitters:
Radiodetection also introduces a new transmitter range. Three models, providing 1, 3 and 10 Watt outputs, use a patented system architecture and amplifier housed in a robust case. They have programmable direct connect and induction frequencies up to 200kHz. Each Tx delivers a constant current across the entire spectrum and has a high voltage mode for high impedance environments.
Radiodetection Transmitters Based on a fully digital platform, the family of Radiodetection transmitters has been designed to support the range of Radiodetection RD7000ル+ and RD8000 cable, pipe and RF marker locators.

The Tx-1 is a low power transmitter. The Tx-5 has a higher power and induction capability as well as Fault Find. The Tx-10 has the highest power capability with both Fault Find and CD modes as standard.

All models feature constant current across their entire bandwidth in either direct connect, clamp or inductive mode. The transmitters are light-weight (6lb / 2.9kg), well-balanced and IP54 rated to cope with demanding environmental conditions. Each model has a removable accessory tray and a weatherproof battery compartment. A large, high contrast, backlit LCD screen provides the user with clear information.

90V output capability: All transmitters offer both 30V and 90V output options, resulting in higher signal current delivered on high impedance target lines than typical transmitters that only offer a 50V output. Higher signal levels are more locatable, and travel over longer distances.

SideStepautoル: allows the transmitter to calculate the optimum frequency based on ground impedance. The transmitter uses this information to optimize the active frequency. SideStepauto helps to improve locate accuracy and extends battery life.

To support the extended RD8000 iLOC feature set, the Tx-5B and Tx-10B can be ordered with integrated iLOC remote transmitter control.

The transmitter range features Direct Connect and induction frequencies compatible with locators across the RD8000 range, and can be easily customized to match your locator using the ムmodelメ feature. The Tx-10B transmitter includes the additional ムPTLメ model featuring the additional frequencies of the RD8000PTLM locator.

A multimeter function enables quick measurements of output voltage, line voltage, current, impedance and power.

The transmitters are powered either by 8 standard D-cell batteries (alkaline or rechargeable NiMH) or by the Lithium-Ion rechargeable battery pack (available separately). Alternatively, the Tx range can be powered from a 12V vehicle source using a Radiodetection approved isolation transformer.

Alkaline battery life can be extended by enabling ECO mode which warns the operator and gradually reduces the power output in low battery conditions (Tx-5 and Tx-10 models only).

Transmitter Features:

  • 10 Watt power version
  • 8kHz Fault Find ヨ locates faults from short circuit up to 2M?
  • Current Direction Fault Find ヨ for long distance fault finding
  • 5 or 13 CD paired frequencies (model dependent)
  • Current delivered at 30V or high voltage mode (90V for high impedance operation)
  • 256Hz to 200kHz active frequency range
  • Selectable modes support RD7000+ and RD8000 specific model locator frequency ranges (Tx-10B required for PTLM models)
  • 8 induction frequencies
  • iLOC (on Tx-5B and Tx-10B only)
  • SideStepauto
  • 250V Transient overvoltage protection
  • Multimeter function
  • Accessory tray (for ground stake, direct connect leads and earth reel)
  • External 12V DC operation (using Radiodetection isolation transformer)
  • Click-touch splash-proof sealed keypad
  • High contrast LCD

TX-10 Transmitter

 

Power (Watt) 10
ECO mode Yes
iLOC No
Active frequencies 15
Induction frequencies 8
Induction field strength 1
8KFF Yes
CD 5
Frequency mode Manual
Standby power mode No

 

SPX TX-10 10 Watt Cable Pipe Transmitter

This Transmitter Can Be Used With The RD7000+ and RD8000 Locators

(RD7000+ and RD8000 Locators Are NOT INCLUDED)

The TX-10 Transmitter has the highest power capability with both Fault Find and CD modes as standard.

SPX Radiodetection TDX-10 TX10 Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

 

BC# -L/T*

  • SPX Radio Detection TX-10 10 Watt Transmitter (BC# -L/T*)
Request a Quote for

Have Questions or doubts? Submit the following request and expect our detailed quote within 24 hours!

we are commited to win your business!